Thanks for your answer! I'm trying to install an image on the uSD and i want to run from that uSD card. i downloaded "Debian 9.5 2018-10-07 4GB SD LXQT" and i tried to write that on uSD with "Win32DiskImager". I formated my SD with "SD card formatter" such as Dennis Lee Bieber said but it failed and i tried with a new SD this process, but it's failed again.I don't know what to do,really!! please help me!
On Wednesday, June 26, 2019 at 11:43:00 PM UTC+4:30, [email protected] wrote: > > The message "You need to format the disk in drive E: before you can use > it" means that Windows can not read the file system on the uSD card. > Well, Windows can not read Linux file systems, so this is OK, and you > should ignore the message. > > The ".img" file and Etcher will install a Linux file system on the card. > > Are you trying to install an image on the uSD card, so that you run from > the uSD card? > Or, are you trying to install a flasher on the uSD card so that the uSD > card will install the image in the Flash memory on the BBB? > > Make sure you are using the correct image file to do what you are trying > to do. > > Is Etcher providing any errors? If so, what does it say? > If Etcher does not report any errors, do not reformat the card like > Windows says, and just put the Etcher programmed card in the BBB and run it. > > --- Graham > > == > > On Wednesday, June 26, 2019 at 7:53:43 AM UTC-5, [email protected] > wrote: >> >> Hello, i have a beaglebone black board. i want to use "Debian 9.5 >> 2018-10-07 4GB SD LXQT" os image for it, i downloaded it from >> http://beagleboard.org/latest-images/ and i try to write it on micro SD >> with "balena etcher" but it cann't write correctly, i repeat this process >> over and over and i deal with "You need to format the disk in drive E: >> before you can use it" any time. >> 14 daya ago, i did this process successfully, but my micro SD damaged and >> i have to change it, after that i have above problem. >> i did this process with other os images, too but i had this problem, >> again. >> please help me! give me a solution! >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/94deb7eb-d06a-429d-ac30-bb153b98f748%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
