Well. That would be nice to have everywhere. Gerald
On Tue, Sep 16, 2014 at 12:00 PM, Robert Nelson <[email protected]> wrote: > On Tue, Sep 16, 2014 at 11:53 AM, Chris Morgan <[email protected]> wrote: > > On Tue, Sep 16, 2014 at 11:42 AM, Thomas Olofsson <[email protected]> > wrote: > >> Greg we are experiencing the same issues as well with reset not > bringing up > >> the eth0 interface. we were trying to do a hw watchdog that would reset > the > >> board and when we press reset the eth0 interface fails as well. We are > also > >> setting the interface config static in /etc/network/interfaces. > >> > >> > >> > >> > >> --Skjortan! > >> > >> On Tue, Sep 16, 2014 at 2:28 PM, Greg Kelley <[email protected]> > wrote: > >>> > >>> I just changed over to the Switching Power Supply and eth0 failed to > come > >>> up on boot. I hit the reset button and a reboot brought it up. So now > it > >>> seems there are eth0 issues as well as resets. Going from bad to worse. > >>> > >>> -- > >>> For more options, visit http://beagleboard.org/discuss > >>> --- > > > > > > I very much appreciate your efforts in looking at these issues. The > > company I work for is planning to use a BBB in a commercial product, > > after discussions with CircuitCo, and this issue has me a little bit > > worried. We haven't had a wide enough scale usage to know if we are > > seeing something similar here with the resets and eth0 issues. > > > > Looking forward to observing as you guys continue to work through this > stuff. > > we do have a phy workaround: > > > https://github.com/RobertCNelson/bb-kernel/blob/am33x-v3.16/patches/beaglebone/phy/0003-cpsw-search-for-phy.patch > > i need to rebase it to the 3.14-ti tree.. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
