On Tue, Sep 16, 2014 at 11:53 AM, Chris Morgan <[email protected]> wrote: > On Tue, Sep 16, 2014 at 11:42 AM, Thomas Olofsson <[email protected]> wrote: >> Greg we are experiencing the same issues as well with reset not bringing up >> the eth0 interface. we were trying to do a hw watchdog that would reset the >> board and when we press reset the eth0 interface fails as well. We are also >> setting the interface config static in /etc/network/interfaces. >> >> >> >> >> --Skjortan! >> >> On Tue, Sep 16, 2014 at 2:28 PM, Greg Kelley <[email protected]> wrote: >>> >>> I just changed over to the Switching Power Supply and eth0 failed to come >>> up on boot. I hit the reset button and a reboot brought it up. So now it >>> seems there are eth0 issues as well as resets. Going from bad to worse. >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- > > > I very much appreciate your efforts in looking at these issues. The > company I work for is planning to use a BBB in a commercial product, > after discussions with CircuitCo, and this issue has me a little bit > worried. We haven't had a wide enough scale usage to know if we are > seeing something similar here with the resets and eth0 issues. > > Looking forward to observing as you guys continue to work through this stuff.
we do have a phy workaround: https://github.com/RobertCNelson/bb-kernel/blob/am33x-v3.16/patches/beaglebone/phy/0003-cpsw-search-for-phy.patch i need to rebase it to the 3.14-ti tree.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
