Update: I changed power supplies back to the 5v2a and removed wicd yesterday at 3:20pm. Ran fine until 8:42am and reset after 16hrs. This time, it didn't bring up eth0 and was unreachable. I pulled the power and powered back up, booted normally. Interesting thing is that syslog only shows the second boot on power up and not the reset reboot. Syslog was fresh at 6:25am and shows only one bootup sequence. Strange. I was hoping resets were from wicd, guess not. Problem still exists. I could deal with a single reset every day, but not when eth0 fails as my weather server uploads ftp files to my website every 15 minutes. I lost eth0 on reset back on 9/11 at 8:13am, so loss of eth0 is random in the resets. I have a Phihong Switching Power Supply 5v2a that I'm going to put on there and see if that helps, but unlikely since Thomas has lab quality power and all of his are resetting. Here's what's left in rc2.d, I have removed S06weewx for now (as well as apache2 and saned).
README S01motd S03cron S03ssh S05cups S01boot_scripts.sh S01rsyslog S03dbus S03udhcpd S06rc.local S01capemgr.sh S01sudo S03loadcpufreq S04avahi-daemon S06rmnologin S01hostapd S01xrdp S03ntp S04cpufrequtils S01leds-off S03acpid S03rsync S05bootlogs -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
