False alarm. Now mine starts but I don't think it's starting the flash procedure. So the above problem was fixed but now I have a different issue.
On Wed, Jul 30, 2014 at 3:28 PM, Jacob Travis <[email protected]> wrote: > Ok, so my problem was I didn't specify the bs=1m on my copy command. > There is a typo in the first link, it should be bs=1M. Stupid problem but > it's working now. > > > On Wed, Jul 30, 2014 at 1:21 PM, <[email protected]> wrote: > >> I'm having the same problem. I'm putting the latest angstrom onto an ssd >> card following the instructions provided in the links below. I formatted >> the SD card to fat32, labeled it BBB_ANSTROM, used dd to copy the image >> (after running unxz on it), put the sd card in, held the user button, apply >> power, no LEDs light up. >> >> >> https://learn.adafruit.com/downloads/pdf/beaglebone-black-installing-operating-systems.pdf >> >> https://learn.adafruit.com/beaglebone-black-installing-operating-systems/flashing-the-beaglebone-black >> >> On Tuesday, April 15, 2014 2:22:48 AM UTC-4, chirag panchal wrote: >>> >>> Hello, >>> I download the Android image file for BBB from link: >>> http://icculus.org/~hendersa/BBB_JB_Android_3_8_13.img.bz2 >>> then by using *win32disk imager*, I write that image file >>> into my microSDcard. >>> then I put microSD card into microSDcard slot of Beagle Bone >>> Black. and *press the boot button*, then* still holding that boot >>> button, I apply power supply*. >>> But *No user LEDs are blinking*. so many times I have done >>> this procedure for a long time. But nothing happend with LED. >>> >>> *Anybody can please help me????* >>> *Thanks in advance.* >>> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/grP5w0CgtLc/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > Jacob Travis > [email protected] > Electrical Engineering student > University of Kentucky > -- Jacob Travis [email protected] Electrical Engineering student University of Kentucky -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
