I'm having the same problem. I'm putting the latest angstrom onto an ssd card following the instructions provided in the links below. I formatted the SD card to fat32, labeled it BBB_ANSTROM, used dd to copy the image (after running unxz on it), put the sd card in, held the user button, apply power, no LEDs light up.
https://learn.adafruit.com/downloads/pdf/beaglebone-black-installing-operating-systems.pdf https://learn.adafruit.com/beaglebone-black-installing-operating-systems/flashing-the-beaglebone-black On Tuesday, April 15, 2014 2:22:48 AM UTC-4, chirag panchal wrote: > > Hello, > I download the Android image file for BBB from link: > http://icculus.org/~hendersa/BBB_JB_Android_3_8_13.img.bz2 > then by using *win32disk imager*, I write that image file into > my microSDcard. > then I put microSD card into microSDcard slot of Beagle Bone > Black. and *press the boot button*, then* still holding that boot button, > I apply power supply*. > But *No user LEDs are blinking*. so many times I have done this > procedure for a long time. But nothing happend with LED. > > *Anybody can please help me????* > *Thanks in advance.* > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
