Ok, so my problem was I didn't specify the bs=1m on my copy command. There is a typo in the first link, it should be bs=1M. Stupid problem but it's working now.
On Wed, Jul 30, 2014 at 1:21 PM, <[email protected]> wrote: > I'm having the same problem. I'm putting the latest angstrom onto an ssd > card following the instructions provided in the links below. I formatted > the SD card to fat32, labeled it BBB_ANSTROM, used dd to copy the image > (after running unxz on it), put the sd card in, held the user button, apply > power, no LEDs light up. > > > https://learn.adafruit.com/downloads/pdf/beaglebone-black-installing-operating-systems.pdf > > https://learn.adafruit.com/beaglebone-black-installing-operating-systems/flashing-the-beaglebone-black > > On Tuesday, April 15, 2014 2:22:48 AM UTC-4, chirag panchal wrote: >> >> Hello, >> I download the Android image file for BBB from link: >> http://icculus.org/~hendersa/BBB_JB_Android_3_8_13.img.bz2 >> then by using *win32disk imager*, I write that image file into >> my microSDcard. >> then I put microSD card into microSDcard slot of Beagle Bone >> Black. and *press the boot button*, then* still holding that boot >> button, I apply power supply*. >> But *No user LEDs are blinking*. so many times I have done >> this procedure for a long time. But nothing happend with LED. >> >> *Anybody can please help me????* >> *Thanks in advance.* >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/grP5w0CgtLc/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Jacob Travis [email protected] Electrical Engineering student University of Kentucky -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
