Am Freitag, den 24.11.2006, 09:56 +0000 schrieb James Ray:
> Troy Daniels wrote:
> It seems to be a 2U, 1 Drive, 12 Slot loader
>
> So your bacula-dir.conf should contain something like:
> Storage {
> Name = Overland
> Address = <whatever>
> SDPort = 9103
> Password = <you must be kidding me>
> Device = Overland
> Media Type = <Something else important here>
> Autochanger = yes
> Maximum Concurrent Jobs = 8
> }
>
> Then your -sd.conf should have something like:
> Autochanger {
> Name = Overland
> Device = Overland.0
> Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
> Changer Device = <The changer device here, /dev/sg1 maybe?>
> }
>
> Device {
> Name = Overland.0
> Drive Index = 0
> Media Type = <Something else important here>
> Archive Device = <where ever your tape dev is, /dev/nst0 maybe>;
> AutomaticMount = yes;
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> Autochanger = yes;
> Maximum Network Buffer Size = 65536
> }
>
> The mtx-changer script may need changing of course, but this -should- work.
>
>
> > Cheers,
> >
> >
> > Troy Daniels
> > Systems Administrator
> > iTouch Australia (pty) ltd.
> >
Hello Troy,
thanks for your reply and you´re right I messed up drives with slots.
I´ve corrected my bacula config, but it´s still the same.
I can´t mount a tape with bconsole.
When no tape is in the first slot
an I issue the command mount, following will hapen.
*mount
Using default Catalog name=MyCatalog DB=bacula
The defined Storage resources are:
1: File
2: Overland
Select Storage resource (1-2): 2
Connecting to Storage daemon Overland at 10.2.0.43:9103 ...
3905 Device "Overland-LTO2" (/dev/st0) open but no Bacula volume is
mounted.
If this is not a blank tape, try unmounting and remounting the Volume.
I mountet a tape with the mtx command returned to the bconsole and tried
to umount and then to mount a tape.
*umoun
The defined Storage resources are:
1: File
2: Overland
Select Storage resource (1-2): 2
3301 Issuing autochanger "loaded drive 0" command.
3302 Autochanger "loaded drive 0", result is Slot 1.
3307 Issuing autochanger "unload slot 1, drive 0" command.
3002 Device "Overland-LTO2" (/dev/st0) unmounted.
*
*
*
*
*mount
The defined Storage resources are:
1: File
2: Overland
Select Storage resource (1-2): 2
3301 Issuing autochanger "loaded drive 0" command.
3302 Autochanger "loaded drive 0", result: nothing loaded.
3301 Issuing autochanger "loaded drive 0" command.
3302 Autochanger "loaded drive 0", result: nothing loaded.
3301 Issuing autochanger "loaded drive 0" command.
3302 Autochanger "loaded drive 0", result: nothing loaded.
3902 Cannot mount Volume on Storage Device "Overland-LTO2" (/dev/st0)
because:
Couldn't rewind device "Overland-LTO2" (/dev/st0): ERR=dev.c:678 Rewind
error on "Overland.0" (/dev/st0). ERR=No medium found.
Any hints?
TIA
Christian
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
