Troy Daniels wrote:
> Hi,
>
> I'm not familiar with this particular autochanger but does it really
> have 12 DRIVES or does it have 12 tape SLOTS?
>
> If it's the later, your config is wrong as you only need to configure a
> device per tape drive, not slot AFAIK.
>
> Also, I dont think you should be specifying 'AutoChanger = Yes' in your
> Device definition. You're defining a tape drive there, not the
> autochanger (which is defined in the AutoChanger definition above it)
>
> Hope this helps in some way,
>
You are correct, unless you think they managed to cram 12 drives in a 2U
form factor or the first email mis-quoted the model of the tape library ;)
It seems to be a 2U, 1 Drive, 12 Slot loader
So your bacula-dir.conf should contain something like:
Storage {
Name = Overland
Address = <whatever>
SDPort = 9103
Password = <you must be kidding me>
Device = Overland
Media Type = <Something else important here>
Autochanger = yes
Maximum Concurrent Jobs = 8
}
Then your -sd.conf should have something like:
Autochanger {
Name = Overland
Device = Overland.0
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = <The changer device here, /dev/sg1 maybe?>
}
Device {
Name = Overland.0
Drive Index = 0
Media Type = <Something else important here>
Archive Device = <where ever your tape dev is, /dev/nst0 maybe>;
AutomaticMount = yes;
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Autochanger = yes;
Maximum Network Buffer Size = 65536
}
The mtx-changer script may need changing of course, but this -should- work.
> Cheers,
>
>
> Troy Daniels
> Systems Administrator
> iTouch Australia (pty) ltd.
>
> christian zimmermann wrote:
>> Hi folks,
>>
>> I need some help with my autochanger config.
>> I have an overland arcvault 12 autochanger, I can mount all tapes with the
>> mtx
>> command no problem.
>> But when I try to mount a tape with bconsole so I can label it I allways get
>> an error like this.
>>
>> mount
>> The defined Storage resources are:
>> 1: File
>> 2: Overland
>> Select Storage resource (1-2): 2
>> Enter autochanger drive[0]: 0
>> 3301 Issuing autochanger "loaded drive 0" command.
>> 3302 Autochanger "loaded drive 0", result: nothing loaded.
>> 3301 Issuing autochanger "loaded drive 0" command.
>> 3302 Autochanger "loaded drive 0", result: nothing loaded.
>> 3301 Issuing autochanger "loaded drive 0" command.
>> 3302 Autochanger "loaded drive 0", result: nothing loaded.
>> 3902 Cannot mount Volume on Storage Device "Drive-1" (/dev/st0) because:
>> Couldn't rewind device "Drive-1" (/dev/st0): ERR=dev.c:678 Rewind error on
>> "Drive-1" (/dev/st0). ERR=No medium found.
>>
>> 3905 Device "Drive-1" (/dev/st0) open but no Bacula volume is mounted.
>> If this is not a blank tape, try unmounting and remounting the Volume.
>>
>>
>> I can mount the tape with mtx and label it without a problem I can even
>> umount
>> the tape with the bconsole. But I´m not able to mount it.
>>
>> Can someone point me in the right direction?
>> I think I have a config error but not sure.
>>
>>
>> This is my bacula-sd.conf
>> ---------------------------------------
>>
>> Autochanger {
>> Name = Overland
>> Device = Drive-1, Drive-2, Drive-3, Drive-4, Drive-5, Drive-6, Drive-7,
>> Drive-8, Drive-9, Drive-10, Drive-11, Drive-12
>> Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
>> Changer Device = /dev/sg1
>> }
>>
>> Device {
>> Name = Drive-1 #
>> Drive Index = 0
>> Media Type = LTO-2
>> Archive Device = /dev/st0
>> AutomaticMount = yes; # when device opened, read it
>> AlwaysOpen = yes;
>> RemovableMedia = yes;
>> RandomAccess = no;
>> AutoChanger = yes
>> # Enable the Alert command only if you have the mtx package loaded
>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>> }
>>
>> Device {
>> Name = Drive-2
>> .
>> .
>> }
>>
>>
>> The bacula-dir.conf
>> -------------------------------
>>
>> Storage {
>> Name = Overland
>> Address = 10.2.0.43
>> SDPort = 9103
>> Password = "test"
>> Device = Drive-1
>> Device = Drive-2
>> Device = Drive-3
>> Device = Drive-4
>> Device = Drive-5
>> Device = Drive-6
>> Device = Drive-7
>> Device = Drive-8
>> Device = Drive-9
>> Device = Drive-10
>> Device = Drive-11
>> Device = Drive-12
>> Media Type = LTO-2
>> Autochanger = yes
>> }
>>
>>
>>
>> -------------------------------------------------------------------------
>> Take Surveys. Earn Cash. Influence the Future of IT
>> Join SourceForge.net's Techsay panel and you'll get the chance to share your
>> opinions on IT & business topics through brief surveys - and earn cash
>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>> _______________________________________________
>> Bacula-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Bacula-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bacula-users
--
James Ray. <[EMAIL PROTECTED]>
Computing Services
Queen Mary, University of London
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
