Hello,
Your bacula-dir.conf is messed up. Delete all the Device = Drive-x
statements, and replace them with:
Device = Overland
Then read the manual to understand why.
On Friday 24 November 2006 10:21, christian zimmermann wrote:
> Hi folks,
>
> I need some help with my autochanger config.
> I have an overland arcvault 12 autochanger, I can mount all tapes with the
mtx
> command no problem.
> But when I try to mount a tape with bconsole so I can label it I allways get
> an error like this.
>
> mount
> The defined Storage resources are:
> 1: File
> 2: Overland
> Select Storage resource (1-2): 2
> Enter autochanger drive[0]: 0
> 3301 Issuing autochanger "loaded drive 0" command.
> 3302 Autochanger "loaded drive 0", result: nothing loaded.
> 3301 Issuing autochanger "loaded drive 0" command.
> 3302 Autochanger "loaded drive 0", result: nothing loaded.
> 3301 Issuing autochanger "loaded drive 0" command.
> 3302 Autochanger "loaded drive 0", result: nothing loaded.
> 3902 Cannot mount Volume on Storage Device "Drive-1" (/dev/st0) because:
> Couldn't rewind device "Drive-1" (/dev/st0): ERR=dev.c:678 Rewind error on
> "Drive-1" (/dev/st0). ERR=No medium found.
>
> 3905 Device "Drive-1" (/dev/st0) open but no Bacula volume is mounted.
> If this is not a blank tape, try unmounting and remounting the Volume.
>
>
> I can mount the tape with mtx and label it without a problem I can even
umount
> the tape with the bconsole. But I´m not able to mount it.
>
> Can someone point me in the right direction?
> I think I have a config error but not sure.
>
>
> This is my bacula-sd.conf
> ---------------------------------------
>
> Autochanger {
> Name = Overland
> Device = Drive-1, Drive-2, Drive-3, Drive-4, Drive-5, Drive-6, Drive-7,
> Drive-8, Drive-9, Drive-10, Drive-11, Drive-12
> Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
> Changer Device = /dev/sg1
> }
>
> Device {
> Name = Drive-1 #
> Drive Index = 0
> Media Type = LTO-2
> Archive Device = /dev/st0
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes
> # Enable the Alert command only if you have the mtx package loaded
> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> }
>
> Device {
> Name = Drive-2
> .
> .
> }
>
>
> The bacula-dir.conf
> -------------------------------
>
> Storage {
> Name = Overland
> Address = 10.2.0.43
> SDPort = 9103
> Password = "test"
> Device = Drive-1
> Device = Drive-2
> Device = Drive-3
> Device = Drive-4
> Device = Drive-5
> Device = Drive-6
> Device = Drive-7
> Device = Drive-8
> Device = Drive-9
> Device = Drive-10
> Device = Drive-11
> Device = Drive-12
> Media Type = LTO-2
> Autochanger = yes
> }
>
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Bacula-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
