Thank you Dan for your reply.
Now I have this:
bacula-dir.conf:
Storage {
Name = Autoloader
Address = backup.intra.melle.de
SDPort = 9103
Password = "secret"
Device = VS160
Media Type = DLT8000
Maximum Concurrent Jobs = 20
}
bacula-sd.conf:
Autochanger {
Name = "Autoloader"
Device = VS160
Changer Device = /dev/sg1
Changer Command = "/var/lib/bacula/mtx-changer %c %o %S %a %d"
}
Device {
Name = VS160
Media Type = DLT8000
Archive Device = /dev/st0 # Normal archive device
AutoChanger = yes
Drive Index = 0
AutomaticMount = yes; # when device opened, read it
RemovableMedia = yes;
AlwaysOpen = yes;
Maximum Spool Size = 30000M
Maximum Job Spool Size = 6000M
Spool Directory = /var/spool/bacula
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
but still the same result :-(
07-Mär 09:37 bacula-dir: Start Backup JobId 3335, Job=TS160.2006-03-07_09.37.05
*
You have messages.
*m
07-Mär 09:39 TS160: DIR and FD clocks differ by 171 seconds, FD automatically
adjusting.
07-Mär 09:37 bacula-sd: 3301 Issuing autochanger "loaded drive 0" command.
07-Mär 09:37 bacula-sd: 3302 Autochanger "loaded drive 0", result: nothing
loaded.
07-Mär 09:37 bacula-sd: 3301 Issuing autochanger "loaded drive 0" command.
07-Mär 09:37 bacula-sd: 3302 Autochanger "loaded drive 0", result: nothing
loaded.
07-Mär 09:37 bacula-sd: Please mount Volume "Mo_1-s8" on Storage Device "VS160"
(/dev/st0) for Job TS160.2006-03-07_09.37.05
As you can see, the sd is doing some Autochamger commands 'Issuing Autochanger
"loaded drive 0" command".
The Autochanger worked perfectly with version 1.36.2. What I am now missing is
something like
'Issuing autochanger "load slot 8 in drive 0" command'
Am Montag März 6 2006 15:52 schrieben Sie:
> Reposted with amendments.
>
> On 6 Mar 2006 at 15:29, Thomas Sturm wrote:
> > Hello,
> > I am using bacula 1.38.5 on Gentoo Linux.
> > My Problem ist, that the Autochanger don't "want" to load the needed
> > tape. Here is the output of bconsole:
> >
> > 06-Mär 14:51 bacula-dir: Start Backup JobId 3329,
> > Job=TS160.2006-03-06_14.51.55 06-Mär 14:51 bacula-sd: 3301 Issuing
> > autochanger "loaded drive 0" command. 06-Mär 14:51 bacula-sd: 3302
> > Autochanger "loaded drive 0", result: nothing loaded. 06-Mär 14:51
> > bacula-sd: 3301 Issuing autochanger "loaded drive 0" command. 06-Mär
> > 14:51 bacula-sd: 3302 Autochanger "loaded drive 0", result: nothing
> > loaded. 06-Mär 14:51 bacula-sd: Please mount Volume "Mo_1-s8" on Storage
> > Device "Autoloade r" (/dev/st0) for Job TS160.2006-03-06_14.51.55
> >
> > Why is 'Issuing autochanger "load drive 8 command"' missing?
> >
> > Running Jobs:
> > JobId Level Name Status
> > ======================================================================
> > 3329 Full TS160.2006-03-06_14.51.55 is waiting for a mount request
> >
> >
> > When I now load the tape manually (with mtx-autochanger), the job
> > finisched without error.
> >
> > Here are the parts of bacula-dir.conf and bacula-sd.conf:
> > bacula-dir.conf:
> > ... snip ...
> > Storage {
> > Name = Autoloader
> > Autochanger = yes
>
> I don't think the above directive is required here.
>
> > Address = backup.intra.melle.de
> > SDPort = 9103
> > Password = "secret"
> > Device = Autoloader
> > Media Type = DLT8000
> > Maximum Concurrent Jobs = 20
> > }
>
> Here is what I have in bacula-dir.conf
>
> Storage {
> Name = TapeRobot1
> Address = ngaio.example.org
> SDPort = 9103
> Password = "things"
> Device = DLT
> Media Type = DLT
> }
>
> > ... snip ...
> >
> > bacula-sd.conf:
> > ... snip ...
> > Device {
> > Name = Autoloader
> > Media Type = DLT8000
> > Archive Device = /dev/st0
> > Changer Device = /dev/sg1
> > Changer Command = "/var/lib/bacula/mtx-changer %c %o %S %a %d"
> > AutoChanger = yes
> > AutomaticMount = yes;
> > Autoselect = yes
> > RemovableMedia = yes;
> > AlwaysOpen = yes;
> > RandomAccess = no;
> > Maximum Spool Size = 30000M
> > Maximum Job Spool Size = 6000M
> > Spool Directory = /var/spool/bacula
> > Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> > }
>
> You appear to have many directives which are not
> You also need an autochanger resource. See below.
>
> I think what you need is something like this:
> This works for me (in bacula-sd.conf):
>
> Device {
> Name = DLT
> Description = QUANTUM DLT7000 1624
> Media Type = DLT
> Archive Device = /dev/nsa1
>
> Autochanger = YES
> Drive Index = 0
>
> Offline On Unmount = no
> Hardware End of Medium = no
> BSF at EOM = yes
> Backward Space Record = yes
> Fast Forward Space File = yes
> TWO EOF = yes
> }
>
>
> Autochanger {
> Name = TapeRobot
> Device = DLT
> Changer Device = /dev/ch0
> Changer Command = "/home/dan/rc-chio-changer %c %o %S %a %d"
> }
>
> i.e. you don't have an autochanger resource. Instead, you have a
> device named "Autochanger".
>
> > What is wrong with this configuration?
>
> Also, make sure your autochange passes the tests:
>
> http://www.bacula.org/dev-manual/Autochanger_Support.html
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
