7 Mar 2006 at 9:54, Thomas Sturm wrote:
> Thank you Dan for your reply.
> Now I have this:
> bacula-dir.conf:
>
> Storage {
> Name = Autoloader
> Address = backup.intra.melle.de
> SDPort = 9103
> Password = "secret"
> Device = VS160
> Media Type = DLT8000
> Maximum Concurrent Jobs = 20
> }
>
> bacula-sd.conf:
>
> Autochanger {
> Name = "Autoloader"
> Device = VS160
> Changer Device = /dev/sg1
> Changer Command = "/var/lib/bacula/mtx-changer %c %o %S %a %d"
> }
>
> Device {
> Name = VS160
> Media Type = DLT8000
> Archive Device = /dev/st0 # Normal archive device
> AutoChanger = yes
> Drive Index = 0
> AutomaticMount = yes; # when device opened, read it
> RemovableMedia = yes;
> AlwaysOpen = yes;
> Maximum Spool Size = 30000M
> Maximum Job Spool Size = 6000M
> Spool Directory = /var/spool/bacula
> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> }
>
> but still the same result :-(
>
> 07-Mär 09:37 bacula-dir: Start Backup JobId 3335,
> Job=TS160.2006-03-07_09.37.05
> *
> You have messages.
> *m
> 07-Mär 09:39 TS160: DIR and FD clocks differ by 171 seconds, FD automatically
> adjusting.
> 07-Mär 09:37 bacula-sd: 3301 Issuing autochanger "loaded drive 0" command.
> 07-Mär 09:37 bacula-sd: 3302 Autochanger "loaded drive 0", result: nothing
> loaded.
> 07-Mär 09:37 bacula-sd: 3301 Issuing autochanger "loaded drive 0" command.
> 07-Mär 09:37 bacula-sd: 3302 Autochanger "loaded drive 0", result: nothing
> loaded.
> 07-Mär 09:37 bacula-sd: Please mount Volume "Mo_1-s8" on Storage Device
> "VS160" (/dev/st0) for Job TS160.2006-03-07_09.37.05
>
> As you can see, the sd is doing some Autochamger commands 'Issuing
> Autochanger "loaded drive 0" command".
> The Autochanger worked perfectly with version 1.36.2. What I am now missing
> is something like
> 'Issuing autochanger "load slot 8 in drive 0" command'
>
>
>
> Am Montag März 6 2006 15:52 schrieben Sie:
> > Reposted with amendments.
> >
> > On 6 Mar 2006 at 15:29, Thomas Sturm wrote:
> > > Hello,
> > > I am using bacula 1.38.5 on Gentoo Linux.
> > > My Problem ist, that the Autochanger don't "want" to load the needed
> > > tape. Here is the output of bconsole:
> > >
> > > 06-Mär 14:51 bacula-dir: Start Backup JobId 3329,
> > > Job=TS160.2006-03-06_14.51.55 06-Mär 14:51 bacula-sd: 3301 Issuing
> > > autochanger "loaded drive 0" command. 06-Mär 14:51 bacula-sd: 3302
> > > Autochanger "loaded drive 0", result: nothing loaded. 06-Mär 14:51
> > > bacula-sd: 3301 Issuing autochanger "loaded drive 0" command. 06-Mär
> > > 14:51 bacula-sd: 3302 Autochanger "loaded drive 0", result: nothing
> > > loaded. 06-Mär 14:51 bacula-sd: Please mount Volume "Mo_1-s8" on Storage
> > > Device "Autoloade r" (/dev/st0) for Job TS160.2006-03-06_14.51.55
> > >
> > > Why is 'Issuing autochanger "load drive 8 command"' missing?
> > >
> > > Running Jobs:
> > > JobId Level Name Status
> > > ======================================================================
> > > 3329 Full TS160.2006-03-06_14.51.55 is waiting for a mount request
> > >
> > >
> > > When I now load the tape manually (with mtx-autochanger), the job
> > > finisched without error.
> > >
> > > Here are the parts of bacula-dir.conf and bacula-sd.conf:
> > > bacula-dir.conf:
> > > ... snip ...
> > > Storage {
> > > Name = Autoloader
> > > Autochanger = yes
> >
> > I don't think the above directive is required here.
> >
> > > Address = backup.intra.melle.de
> > > SDPort = 9103
> > > Password = "secret"
> > > Device = Autoloader
> > > Media Type = DLT8000
> > > Maximum Concurrent Jobs = 20
> > > }
> >
> > Here is what I have in bacula-dir.conf
> >
> > Storage {
> > Name = TapeRobot1
> > Address = ngaio.example.org
> > SDPort = 9103
> > Password = "things"
> > Device = DLT
> > Media Type = DLT
> > }
> >
> > > ... snip ...
> > >
> > > bacula-sd.conf:
> > > ... snip ...
> > > Device {
> > > Name = Autoloader
> > > Media Type = DLT8000
> > > Archive Device = /dev/st0
> > > Changer Device = /dev/sg1
> > > Changer Command = "/var/lib/bacula/mtx-changer %c %o %S %a %d"
> > > AutoChanger = yes
> > > AutomaticMount = yes;
> > > Autoselect = yes
> > > RemovableMedia = yes;
> > > AlwaysOpen = yes;
> > > RandomAccess = no;
> > > Maximum Spool Size = 30000M
> > > Maximum Job Spool Size = 6000M
> > > Spool Directory = /var/spool/bacula
> > > Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> > > }
> >
> > You appear to have many directives which are not
> > You also need an autochanger resource. See below.
> >
> > I think what you need is something like this:
> > This works for me (in bacula-sd.conf):
> >
> > Device {
> > Name = DLT
> > Description = QUANTUM DLT7000 1624
> > Media Type = DLT
> > Archive Device = /dev/nsa1
> >
> > Autochanger = YES
> > Drive Index = 0
> >
> > Offline On Unmount = no
> > Hardware End of Medium = no
> > BSF at EOM = yes
> > Backward Space Record = yes
> > Fast Forward Space File = yes
> > TWO EOF = yes
> > }
> >
> >
> > Autochanger {
> > Name = TapeRobot
> > Device = DLT
> > Changer Device = /dev/ch0
> > Changer Command = "/home/dan/rc-chio-changer %c %o %S %a %d"
> > }
> >
> > i.e. you don't have an autochanger resource. Instead, you have a
> > device named "Autochanger".
> >
> > > What is wrong with this configuration?
> >
> > Also, make sure your autochange passes the tests:
> >
> > http://www.bacula.org/dev-manual/Autochanger_Support.html
>
Did you do the above?
--
Dan Langille : Software Developer looking for work
my resume: http://www.freebsddiary.org/dan_langille.php
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
