Hallo Arno,
the autochanger does not have the ability to scan. I created the Tape with the
label command. But I created them BEFORE the upgrade to 1.38.5.
Now I deleted the Tape and recreated it with the "label" command.
AND NOW IT WORKS!!!
I think there is a problem within the bacula-database (I use postrgres).
Does anyone know how to korrect this without recreating every volume?
Thanks
Thomas
Am Dienstag März 7 2006 09:58 schrieb Arno Lehmann:
> Hi,
>
> On 3/7/2006 9:54 AM, Thomas Sturm wrote:
> > Thank you Dan for your reply.
> > Now I have this:
> > bacula-dir.conf:
> >
> > Storage {
> > Name = Autoloader
> > Address = backup.intra.melle.de
> > SDPort = 9103
> > Password = "secret"
> > Device = VS160
> > Media Type = DLT8000
> > Maximum Concurrent Jobs = 20
> > }
> >
> > bacula-sd.conf:
> >
> > Autochanger {
> > Name = "Autoloader"
> > Device = VS160
> > Changer Device = /dev/sg1
> > Changer Command = "/var/lib/bacula/mtx-changer %c %o %S %a %d"
> > }
> >
> > Device {
> > Name = VS160
> > Media Type = DLT8000
> > Archive Device = /dev/st0 # Normal archive device
> > AutoChanger = yes
> > Drive Index = 0
> > AutomaticMount = yes; # when device opened, read it
> > RemovableMedia = yes;
> > AlwaysOpen = yes;
> > Maximum Spool Size = 30000M
> > Maximum Job Spool Size = 6000M
> > Spool Directory = /var/spool/bacula
> > Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> > }
> >
> > but still the same result :-(
> >
> > 07-Mär 09:37 bacula-dir: Start Backup JobId 3335,
> > Job=TS160.2006-03-07_09.37.05 *
> > You have messages.
> > *m
> > 07-Mär 09:39 TS160: DIR and FD clocks differ by 171 seconds, FD
> > automatically adjusting. 07-Mär 09:37 bacula-sd: 3301 Issuing autochanger
> > "loaded drive 0" command. 07-Mär 09:37 bacula-sd: 3302 Autochanger
> > "loaded drive 0", result: nothing loaded. 07-Mär 09:37 bacula-sd: 3301
> > Issuing autochanger "loaded drive 0" command. 07-Mär 09:37 bacula-sd:
> > 3302 Autochanger "loaded drive 0", result: nothing loaded. 07-Mär 09:37
> > bacula-sd: Please mount Volume "Mo_1-s8" on Storage Device "VS160"
> > (/dev/st0) for Job TS160.2006-03-07_09.37.05
> >
> > As you can see, the sd is doing some Autochamger commands 'Issuing
> > Autochanger "loaded drive 0" command". The Autochanger worked perfectly
> > with version 1.36.2. What I am now missing is something like 'Issuing
> > autochanger "load slot 8 in drive 0" command'
>
> It is possible that the catalog doesn't have any information about
> volumes available in the autochanger. The easiest resolution in that
> case is diong an 'update slots [scan] storage=Autoloader' in a Bacula
> console.
>
> Hope this helps,
>
> Arno
>
> > Am Montag März 6 2006 15:52 schrieben Sie:
> >>Reposted with amendments.
> >>
> >>On 6 Mar 2006 at 15:29, Thomas Sturm wrote:
> >>>Hello,
> >>>I am using bacula 1.38.5 on Gentoo Linux.
> >>>My Problem ist, that the Autochanger don't "want" to load the needed
> >>>tape. Here is the output of bconsole:
> >>>
> >>>06-Mär 14:51 bacula-dir: Start Backup JobId 3329,
> >>>Job=TS160.2006-03-06_14.51.55 06-Mär 14:51 bacula-sd: 3301 Issuing
> >>>autochanger "loaded drive 0" command. 06-Mär 14:51 bacula-sd: 3302
> >>>Autochanger "loaded drive 0", result: nothing loaded. 06-Mär 14:51
> >>>bacula-sd: 3301 Issuing autochanger "loaded drive 0" command. 06-Mär
> >>>14:51 bacula-sd: 3302 Autochanger "loaded drive 0", result: nothing
> >>>loaded. 06-Mär 14:51 bacula-sd: Please mount Volume "Mo_1-s8" on Storage
> >>>Device "Autoloade r" (/dev/st0) for Job TS160.2006-03-06_14.51.55
> >>>
> >>>Why is 'Issuing autochanger "load drive 8 command"' missing?
> >>>
> >>>Running Jobs:
> >>> JobId Level Name Status
> >>>======================================================================
> >>> 3329 Full TS160.2006-03-06_14.51.55 is waiting for a mount request
> >>>
> >>>
> >>>When I now load the tape manually (with mtx-autochanger), the job
> >>>finisched without error.
> >>>
> >>>Here are the parts of bacula-dir.conf and bacula-sd.conf:
> >>>bacula-dir.conf:
> >>>... snip ...
> >>>Storage {
> >>> Name = Autoloader
> >>> Autochanger = yes
> >>
> >>I don't think the above directive is required here.
> >>
> >>> Address = backup.intra.melle.de
> >>> SDPort = 9103
> >>> Password = "secret"
> >>> Device = Autoloader
> >>> Media Type = DLT8000
> >>> Maximum Concurrent Jobs = 20
> >>>}
> >>
> >>Here is what I have in bacula-dir.conf
> >>
> >>Storage {
> >> Name = TapeRobot1
> >> Address = ngaio.example.org
> >> SDPort = 9103
> >> Password = "things"
> >> Device = DLT
> >> Media Type = DLT
> >>}
> >>
> >>>... snip ...
> >>>
> >>>bacula-sd.conf:
> >>>... snip ...
> >>>Device {
> >>> Name = Autoloader
> >>> Media Type = DLT8000
> >>> Archive Device = /dev/st0
> >>> Changer Device = /dev/sg1
> >>> Changer Command = "/var/lib/bacula/mtx-changer %c %o %S %a %d"
> >>> AutoChanger = yes
> >>> AutomaticMount = yes;
> >>> Autoselect = yes
> >>> RemovableMedia = yes;
> >>> AlwaysOpen = yes;
> >>> RandomAccess = no;
> >>> Maximum Spool Size = 30000M
> >>> Maximum Job Spool Size = 6000M
> >>> Spool Directory = /var/spool/bacula
> >>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> >>>}
> >>
> >>You appear to have many directives which are not
> >>You also need an autochanger resource. See below.
> >>
> >>I think what you need is something like this:
> >>This works for me (in bacula-sd.conf):
> >>
> >>Device {
> >> Name = DLT
> >> Description = QUANTUM DLT7000 1624
> >> Media Type = DLT
> >> Archive Device = /dev/nsa1
> >>
> >> Autochanger = YES
> >> Drive Index = 0
> >>
> >> Offline On Unmount = no
> >> Hardware End of Medium = no
> >> BSF at EOM = yes
> >> Backward Space Record = yes
> >> Fast Forward Space File = yes
> >> TWO EOF = yes
> >>}
> >>
> >>
> >>Autochanger {
> >> Name = TapeRobot
> >> Device = DLT
> >> Changer Device = /dev/ch0
> >> Changer Command = "/home/dan/rc-chio-changer %c %o %S %a %d"
> >>}
> >>
> >>i.e. you don't have an autochanger resource. Instead, you have a
> >>device named "Autochanger".
> >>
> >>>What is wrong with this configuration?
> >>
> >>Also, make sure your autochange passes the tests:
> >>
> >>http://www.bacula.org/dev-manual/Autochanger_Support.html
> >
> > -------------------------------------------------------
> > This SF.Net email is sponsored by xPML, a groundbreaking scripting
> > language that extends applications into web and mobile media. Attend the
> > live webcast and join the prime developer group breaking into this new
> > coding territory!
> > http://sel.as-us.falkag.net/sel?cmd=k&kid0944&bid$1720&dat1642
> > _______________________________________________
> > Bacula-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Mit freundlichen Grüßen
Melle Service GmbH
i.A. Thomas Sturm
eMail: [EMAIL PROTECTED]
Telefon: 05522 967-160
Fax: 05522 967-149
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
