I Changed it to pri_net and get the following error now: Jun 6 08:52:17 WARNING[3438]: chan_zap.c:7970 pri_dchannel: PRI Error: We think we're the network, but they think they're the network, too.
Any ideas? -- Tom On 6/6/05, Gustavo Alvarez <[EMAIL PROTECTED]> wrote: > The problem is that both adit600 and Asterisk box are configured as > clock slaves (pri_cpe). > Change pri_cpe to pri_net in your zapata.conf, and your asterisk box > would be the clock source. > It should work. Good Luck. > > Argentilinux. > > Tom Hayden escribi�: > > >Hello > >I just installed a TE110P in a Dell Poweredge 750 (rackmount), which > >is connected via crossover T1 cable to a adit 600. Anyway, I've > >encountered an array of errors, which I believe I have narrowed down > >to the 22 IRQ misses I encounter on zttool. I've noticed that the > >te110p and the usb device share an IRQ. Could that be the source of my > >woes? Would disabling the usb device in the bios solve my problems or > >could it be my configuration? > > > >-- Errors generated by asterisk > >chan_zap.c:7970 pri_dchannel: PRI Error: We think we're the CPE, but > >they think they're the CPE too. > > > >---zaptel.conf > >defaultzone=us > >span=1,1,0,esf,b8zs > >bchan=1-23 > >dchan=24 > >loadzone=us > > > >-- zapata.conf (relevant portions) > >signalling = pri_cpe > >switchtype = national > >group = 2 > >context = fxoout > >cidsignalling = dtmf > >cidstart = polarity > >channel => 1-23 > > > >-- proc/interrupts > > CPU0 > > 0: 6334299 IO-APIC-edge timer > > 1: 14390 IO-APIC-edge keyboard > > 2: 0 XT-PIC cascade > > 8: 3 IO-APIC-edge rtc > > 14: 2 IO-APIC-edge ide0 > > 15: 505440 IO-APIC-edge ide1 > > 21: 150019 IO-APIC-level eth1 > > 22: 63326503 IO-APIC-level t1xxp > > > >-- lspci -bv | grep IRQ > > Flags: bus master, medium devsel, latency 0, IRQ 11 > > Flags: bus master, medium devsel, latency 0, IRQ 10 (USB) > > Flags: bus master, fast devsel, latency 0, IRQ 255 > > Flags: bus master, medium devsel, latency 0, IRQ 7 > > Flags: medium devsel, IRQ 5 > > Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 3 > > Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11 > > Flags: bus master, medium devsel, latency 32, IRQ 10 (**TE110P**) > > Flags: bus master, VGA palette snoop, stepping, medium devsel, > >latency 32, IRQ 255 > > > >Thanks in Advance, > > > > > > > > -- Tom _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
