Is there some kind of guide available or information about connecting to the adit or using it's CLI console? All I have is a null-modem cable. Will that work? Thanks
-- Tom On 6/6/05, Zoa <[EMAIL PROTECTED]> wrote: > > Hmm, looks like i sent that email a little too fast. ( i scanned through > the email but didn't read it all for some reason... sorry) > You seem to have two problems, the error is not related to a shared irq > but to a setting on either the adit 600 or in the zapata.conf > From your last email it looks like you need to change something on the > adit 600. (i dont have an adit 600 myself so i dont know what exactly). > > Cheers, > > Zoa. > > Zoa wrote: > > > > > The sharing of an IRQ is indeed a problem > > > > Read this tutorial to know exactly what to do: > > > > http://www.asteriskguru.com/tutorials/pci_irq_apic_tdm_ticks_te410p_te405p_noise.html > > > > > > Greetings, > > > > zoa, > > > > Tom Hayden wrote: > > > >> Hello > >> I just installed a TE110P in a Dell Poweredge 750 (rackmount), which > >> is connected via crossover T1 cable to a adit 600. Anyway, I've > >> encountered an array of errors, which I believe I have narrowed down > >> to the 22 IRQ misses I encounter on zttool. I've noticed that the > >> te110p and the usb device share an IRQ. Could that be the source of my > >> woes? Would disabling the usb device in the bios solve my problems or > >> could it be my configuration? > >> > >> -- Errors generated by asterisk > >> chan_zap.c:7970 pri_dchannel: PRI Error: We think we're the CPE, but > >> they think they're the CPE too. > >> > >> ---zaptel.conf > >> defaultzone=us > >> span=1,1,0,esf,b8zs > >> bchan=1-23 > >> dchan=24 > >> loadzone=us > >> > >> -- zapata.conf (relevant portions) > >> signalling = pri_cpe > >> switchtype = national > >> group = 2 > >> context = fxoout > >> cidsignalling = dtmf > >> cidstart = polarity > >> channel => 1-23 > >> > >> -- proc/interrupts > >> CPU0 > >> 0: 6334299 IO-APIC-edge timer > >> 1: 14390 IO-APIC-edge keyboard > >> 2: 0 XT-PIC cascade > >> 8: 3 IO-APIC-edge rtc > >> 14: 2 IO-APIC-edge ide0 > >> 15: 505440 IO-APIC-edge ide1 > >> 21: 150019 IO-APIC-level eth1 > >> 22: 63326503 IO-APIC-level t1xxp > >> > >> -- lspci -bv | grep IRQ > >> Flags: bus master, medium devsel, latency 0, IRQ 11 > >> Flags: bus master, medium devsel, latency 0, IRQ 10 (USB) > >> Flags: bus master, fast devsel, latency 0, IRQ 255 > >> Flags: bus master, medium devsel, latency 0, IRQ 7 > >> Flags: medium devsel, IRQ 5 > >> Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 3 > >> Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11 > >> Flags: bus master, medium devsel, latency 32, IRQ 10 (**TE110P**) > >> Flags: bus master, VGA palette snoop, stepping, medium devsel, > >> latency 32, IRQ 255 > >> > >> Thanks in Advance, > >> > >> > >> > > > >------------------------------------------------------------------------ > > > >_______________________________________________ > >Asterisk-Users mailing list > >[email protected] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- Tom _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
