[Asterisk-Users] Tranferring UniCall lines

[Guillermo Freige]

It's possible to use the "Transfer" function in UniCall MFC/R2 lines?. The 
command seems to do nothing when called from a R2 call, but it works fine 
from a SIP phone. Transfer and 3waycalling options are set to "Yes" in 
unicall.conf. I've tried the "hook" command but it didn't work either.
I need to make a blind transfer from a incoming line of our R2-connected PBX 
to another extension in the PBX, to not to waste 2 channels in a second Dial 
command.
Also I'm having trouble with outgoing calls generated in Asterisk to the PBX 
via the R2 line. The call hangs after a couple of seconds if answered in the 
first ring, or dies after the first ring if unnattended, and the channel 
remains in "Call" state in asterisk. Any indea?. Incoming calls work ok.

Guillermo
_________________________________________________________________
Charla con tus amigos en l�nea mediante MSN Messenger: 
http://messenger.latam.msn.com/

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users