I'm having problems with Unicall channels in a heavily used asterisk. The box is using 2 E1 lines in mfcr2, with both incoming and outgoing calls, uning Argentina R2 variant. Besides the already known problem when the outgoing calls failing and blocking a channel, now I have loop problems. When I reach around 40 channels in use, and after some time, some channels generate an endless loop of error messages, CPU goes to 99%, locking the channel and finally generating a segfault after 5 or 6 channels in this state. I never saw this problem during testing, not like the previously mentioned ougoing call problem, that happen despite the level of usage.
First it generates a short bunch of this message: Dec 9 14:40:18 WARNING[25526315]: We're UniCall/17-1, not UniCall/11-1 Dec 9 14:40:18 WARNING[25526315]: ast = 0x8283328, p->owner = 0x81bd7b8
Lately it generates the following messages in an endless loop: Dec 9 15:02:35 WARNING[4046889]: We're UniCall/17-1, not Dec 9 15:02:35 WARNING[4046889]: ast = 0x8243720, p->owner = 0x8256478
Now I've changed this message from WARNING to DEBUG to not to clog the logfile, but the problem remains the same.
Any ideas??
Guillermo
_________________________________________________________________ MSN Amor: busca tu � naranja http://latam.msn.com/amor/
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
