Just a note regarding this issue.
I'm using RH9, two X100p and one TDM400
Loading them in this order:
zaptel
wcfxo
wcfxs
zapata.conf like this:
----------------
fxsks=1
fxsks=2
;--
fxoks=3
fxoks=4
fxoks=5
fxoks=6
zaptel.conf like this:
----------------
signalling=fxs_ks
channel=1
channel=2
signalling=fxo_ks
channel=3
channel=4
channel=5
channel=6
This is a fully working config. BUT, note that I will get same complains as
you - during loading of modules. My solution for this was to remove
the following from /etc/modules.conf
post-install tor2 /sbin/ztcfg
post-install wcfxo /sbin/ztcfg
post-install wct1xxp /sbin/ztcfg
post-install wct4xxp /sbin/ztcfg
post-install wcfxs /sbin/ztcfg
post-install wcfxsusb /sbin/ztcfg
post-install torisa /sbin/ztcfg
and instead running /sbin/ztcfg after modules was loaded.
It seems as this "ztcfg" gets confused when running
after each module as it is done when part part of post-install.
Maybe helps...
/Stig
At 17:14 2004-04-13 +1000, you wrote:
>> This looks wrong. What is the full output of ztcfg -vvv?
>
>Zaptel Configuration
>======================
>
>
>Channel map:
>
>Channel 01: FXS Kewlstart (Default) (Slaves: 01)
>Channel 02: FXO Kewlstart (Default) (Slaves: 02)
>Channel 03: FXO Kewlstart (Default) (Slaves: 03)
>Channel 04: FXS Kewlstart (Default) (Slaves: 04)
>
>4 channels configured.
>
>> I'd be surprised if this worked as expected once you got * started...
>
>Well now that I just tried * it doesn't work...
>
>--snip--
> [chan_zap.so] => (Zapata Telephony w/PRI)
> == Parsing '/etc/asterisk/zapata.conf': Found
> -- Registered channel 1, FXS Kewlstart signalling
>Apr 13 17:13:42 WARNING[16384]: chan_zap.c:665 zt_open: Unable to
>specify channel 4: No such device
>Apr 13 17:13:42 ERROR[16384]: chan_zap.c:5319 mkintf: Unable to open
>channel 4: No such device
>here = 0, tmp->channel = 4, channel = 4
>Apr 13 17:13:42 ERROR[16384]: chan_zap.c:7355 setup_zap: Unable to
>register channel '4'
>Apr 13 17:13:42 WARNING[16384]: loader.c:313 ast_load_resource:
>chan_zap.so: load_module failed, returning -1
> == Unregistered channel type 'Tor'
> == Unregistered channel type 'Zap'
> -- Unregistered channel 1
> -- Unregistered channel 2
>Apr 13 17:13:42 WARNING[16384]: loader.c:408 load_modules: Loading
>module chan_zap.so failed!
>--snip--
>
>> Out of curiosity, what's the arrangement of the cards in the slots? Is
>> the TDM card between the two X100Ps?
>
>The TDM is above the two X100P's, before it was below them.
>
>--
>jeremy bogan [ [EMAIL PROTECTED] ]
>segment publishing - design.develop.host
>
>_______________________________________________
>Asterisk-Users mailing list
>[EMAIL PROTECTED]
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------------------------------------------------------------------------------
N Y H E T E R!
- Internetaccess (Modem/ISDN64+128 via Ymex - utan abonnemangskostnad!!!
ONLINE-registrering p� www.ymex.se
- Uppringd SMTP, slut p� Telias monopol, nu kan �ven Ymex erbjuda!
- Surf24 - en billig bredbandstj�nst fr�n Ymex f�r kunder i H�rn�sand/�landsbro.
-------------------------------------------------------------------------------------
Get your emailed Web-forms into a database of your choice!!!
Checkout DBFORM V1.0, see details at http://www.ymex.se
UucpGate V1.3a - The No:1 UUCP gateway for allmost any Email server!
New release! Mailcoach V2.27 - The business E-mail solution. http://www.mailcoach.com/
-------------------------------------------------------------------------------------
Ymex AB| Alv�gen 7 | 871 52 H�rn�sand | Sweden | http://www.ymex.se/
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
