We had a slightly similar problem with our Zplex10. The power supply died and we had to replace it. :( It got progressively worse until no lights came on and the fans spun really slowly.
You might also want to check that your connection cable is correct and has a sure connection... -wade > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Eris Riswanto > Sent: Monday, March 31, 2003 8:22 PM > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] Serious problem with z-plex 10 > > > |Do not plug in ethernet cable at all, even if the interface is down. > | > |The long time to come up is due to the software being verified, and then > |booted. It is that way on many channel banks. > | > |Also it could mean the zplex is not happy with the line coding it is > |getting. It is a very sensitive device and flakes out if it doesn't get > |good signal. > |-- > |Steven Critchfield <[EMAIL PROTECTED]> > | > > The ethernet port from the device doesn't even connected to network. > But i did configure the ethernet interface. I think the device > mess up with the network configuration. > How can i get back the device to original configuration? > Anybody experienced with it, or any good idea to fix this problem? > > Thanks in advance > > Eris Riswanto > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
