> Do not plug in ethernet cable at all, even if the interface is down. This device has poor networking implementation. If I leave one of ours plugged in (pretty traffic intensive in our shop) it is sure to go down. If it is in a switch or slow segement it does ok but as Steven pointed out you are better off avoiding this pitfall.
> Also it could mean the zplex is not happy with the line coding it is > getting. It is a very sensitive device and flakes out if it doesn't get > good signal. I have observed that if you dial a (unused) port that does not have a phone plugged into it it may start detecting pickups on unused ports and I see messages something like "Picking up channel Zap/9-1" then a few seconds later Hanging up... Sometimes unplugging the T1 cable for a few seconds helps the channels come back up in ~30 seconds. I'm glad I didn't pay too much for these. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
