What's the Nurburgring time for an F-250, a Grand Caravan and a Ferrari?
----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Jon Langeler" <[email protected]> To: [email protected] Sent: Thursday, January 12, 2017 5:14:47 PM Subject: Re: [AFMUG] Our UBNT AF11x experience What's the one way throughout of Mimosa vs AF11x vs IP20 in 40Mhz? Jon Langeler Michwave Technologies, Inc. On Jan 12, 2017, at 5:55 PM, Mike Hammett < [email protected] > wrote: At 40 MHz and a single polarity, you're looking at an almost insignificant increase in throughput. Their claim is 1.2 gb+. Cut that in half as they're advertising the aggregate, so 600 mb+. That's using both polarities, so now only 300 mb+. Only I haven't heard of anyone getting much more than 500 in a single direction (they may certainly exist, I just haven't seen them), so now that 300 is really only 250. Not much of an upgrade unless you can also get larger channels in both polarities. ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Josh Baird" < [email protected] > To: [email protected] Sent: Thursday, January 12, 2017 11:47:42 AM Subject: Re: [AFMUG] Our UBNT AF11x experience This PTP800 is only capable of running at 40Mhz (ODU-A) so it can only do 228Mbps full-duplex. The AF11x should be able to do much more than that, right? On Thu, Jan 12, 2017 at 12:05 PM, Gino Villarini < [email protected] > wrote: <blockquote> IIRC, PTP800 is Remec Style, you'll need Remec to N connector adapters (AF11x is N) What do you expect to achieve with this upgrade? Not much capacity difference between PTP800 and AF11x, maybe 50-80- mbps more. Only if you have a xpic license you can double your throughput with the af11x From: Af < [email protected] > on behalf of Josh Baird < [email protected] > Reply-To: " [email protected] " < [email protected] > Date: Thursday, January 12, 2017 at 9:12 AM To: " [email protected] " < [email protected] > Subject: Re: [AFMUG] Our UBNT AF11x experience Good news - thanks for sharing. Somewhat un-related question: I have a PTP-800 link using these dishes: http://www.hol4g.com/AC/product.aspx?number=ANC-VHLP3-11W-RR1&p=237127&sc=0 Do you know if I can re-use these dishes with the AF11x? Do I need adapters? Josh Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 <aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png> On Thu, Jan 12, 2017 at 8:07 AM, Gino Villarini < [email protected] > wrote: <blockquote> Hey all, just dropping by to share our experience with AF11x, we habe been beta testing the unit since Sept and for the last 3 months, the unit has been rock solid. We are very happy with its performance, just wished it had a SFP port! This unit replaced a Mimosa B11 unit that we were having some intermitent throughtput issues, The swap was easy since we reused the Jirous Dishes and only had to add the af11x adapters to it, The link went live on 9/21/16 and on the first weeks we experienced some lockups, but after a revised beta fw was applied, all issues went away. For UBNT, please add SFP port and continue the good work towards a af6x and af18x Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 <aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png> </blockquote> </blockquote>
