Suprema looks pretty good.. https://www.supremainc.com/en/AccessControl-TimeandAttendance/Platform/BioStar-2-Mobile
On Mon, Mar 28, 2016 at 8:54 PM, Sterling Jacobson <[email protected]> wrote: > Your pretty much back to the windows database solution at this point. > > You can do this with the cheap Chinese boards in aggregate with their > software. > > It’s not pretty, but it does what you want, multiple controllers, software > with users and keys and time/scheduler etc. > > All for a few hundred bucks per four doors using standard keypads and locks. > > > > Otherwise, let us know if you find anything cool! > > > > Would be nice to get a better turnkey solution that wasn’t based on 90’s > interface and DB paradigm. > > > > From: Af [mailto:[email protected]] On Behalf Of Josh Reynolds > Sent: Monday, March 28, 2016 7:51 PM > To: [email protected] > Subject: Re: [AFMUG] door access control > > > > My access solution needs to have different access per user / door / time via > pin and keyfob, so can't really get something too simple due to various > needs, contractors, etc. :/ > > On Mar 28, 2016 8:47 PM, "Lewis Bergman" <[email protected]> wrote: > > You will all laugh but I just put in a wink and schlage locks. Not exactly > a real security system since there is no keypad you can arm or disarm. You > can only do that through the app. One of my people doesn't have a new enough > smartphone for the app. It allows you to use robots which are simple if then > logic. > I know it isn't difficult enough for many of you but it is cheap, easy, and > pretty. > A nice keypad would be a good pi project to round it out though. > > > > On Mon, Mar 28, 2016, 7:32 PM Josh Reynolds <[email protected]> wrote: > > You have a door strike. The magnetic systems can be no or nc. If you > loopback 12v from the keypad back to the doorcontroller, you can often > trigger a fault state that releases power to the maglock. ;) > > On Mar 28, 2016 7:11 PM, "Sterling Jacobson" <[email protected]> wrote: > > I’m pretty sure you could also just smash the glass and walk in too J > > > > But the door strike on mine does go back to the controller I believe, so you > couldn’t just jimmy the keypad wiring. > > > > Not really a high security scenario since my idea was to theoretically be > able to pay $5 and enter (then walk out with anything you like I guess). > > > > > > > > > > > > From: Af [mailto:[email protected]] On Behalf Of Josh Reynolds > Sent: Monday, March 28, 2016 6:07 PM > To: [email protected] > Subject: Re: [AFMUG] door access control > > > > Also, pretty sure the one you have... If I remember right, I could rip the > keypad off and touch brown to red to open the door based on the wiring > diagram. > > On Mar 28, 2016 7:03 PM, "Sterling Jacobson" <[email protected]> wrote: > > I've had the same problem. > > The local alarm company wanted like $3-4k for a two door install, lol! > > Here is what I did so far: > > I bought a controller board off of eBay that does the standard protocol used > by the strike. > I bought the strike off ebay too. > I bought a keypad controller off eBay. > The controller came with a small locking box, and has room for a battery > backup and can use PoE. > > The whole thing cost less than $500 I think. > > I used Ethernet to connect the box to my switch and to the strike and > keypad. > > The controller has a simple web interface you log on to and then add/remove > door codes. > > I did have to interpret some Chinese manuals to figure out the pinouts for > everything, but it works as expected. > > What I have left to do is map the private IP of the controller to a public > IP and firewall it. > > And then I wanted to write a service/web api to it so I could use a up to > date 'normal' API access to add/remove door codes. > > Let me know if you want more details. > > -----Original Message----- > From: Af [mailto:[email protected]] On Behalf Of Josh Reynolds > Sent: Monday, March 28, 2016 4:53 PM > To: [email protected] > Subject: [AFMUG] door access control > > I'm dying here. Every single system I can find is shit or costs an arm and a > leg, to the point where I'm considering starting a company to make a better > system. I just need an embedded, web based, IP access control system. It > needs to be able to control the individual door access controllers to > electronic striker or maglock to the keypad. POE here is best. If it > requires software running on a windows PC then I don't want anything to do > with it, even for those of you who are like "put it in a vm"... no. Those > resources are reserved for properly functioning operation systems (and LXC > containers!). > > I've got 3 doors at one location, then 2 more doors at 2 other locations. > > If it has a mobile app, that's even better. > > I've installed a couple of HID Global and DoorKing systems in the past and > nothing about this is hard, but the chinese systems are only made for a > single location. > > Any suggestions?
