hmm....great post josh! lots of good info in those three sentences. ----- Original Message ----- From: Josh Luthman To: [email protected] Sent: Wednesday, March 04, 2015 10:55 AM Subject: Re: [AFMUG] Ubiquiti radios with different xm/xw firmware
With no noise, Nanobeams are just a dream. I have a link 11.2 miles with 95% airmax that are working beautifully. In another location the link is totally crap, even with a -60. The noise on the far tower just won't let it function. Note that ePMP worked very well as a replacement. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Mar 4, 2015 at 11:33 AM, Jaime Solorza <[email protected]> wrote: Going to install our first NanoBeam to NanoBeam link on Friday at seven miles....lets see how well they work. on bench they did great. Jaime Solorza Wireless Systems Architect 915-861-1390 On Tue, Mar 3, 2015 at 11:33 PM, Rory Conaway <[email protected]> wrote: I know that was some discussion on this and some people said that mixing firmware was a problem, even with 5.5.10. I hadn’t seen the problem until about a week ago. Had PowerBridge talking to a Powerbeam talking to a PowerBridge which then link to a another PTP using NS5’s and an AP on that end. It seemed to work great for several months. A week ago, the AP at the end started pushing through 10-20 pings and then dropping 3 pings. After finding nothing, we pull the PowerBridge and replaced it with a PowerBeam. Problem solved. On the other hand, we have a boatload of NS5M’s, some with XW firmware connected to XM Rockets. No problems so far. Rory
