Hello, You are my last Hope. Doesn't really nonone have an Idea?
Greetings, Hendrik Am 30.11.2010 um 20:25 schrieb Hendrik Friedel <[email protected]>: > Hello, > > I have a very odd problem with my new TV. > I only get an output to it, when runnig xine or vdr-sxfe, which is a xine > based frontend to VDR. > As soon, as I stop xine, the TV shows "LG, No Signal". > I can start nvidia-settings then, but it does not show up. Still I get "LG, > No Signal". Only, when I don't stop xine, and start nvidia-settings (or any > other X application) on top of xine, I see the application. > > This is odd already. But it get's better. The output of xrandr does not > change between the two (working/not working) states: > xrandr --verbose > Screen 0: minimum 800 x 600, current 1920 x 1080, maximum 1920 x 1080 > default connected 1920x1080+0+0 (0x12a) normal (normal) 0mm x 0mm > Identifier: 0x129 > Timestamp: 22991 > Subpixel: unknown > Clones: > CRTC: 0 > CRTCs: 0 > Transform: 1.000000 0.000000 0.000000 > 0.000000 1.000000 0.000000 > 0.000000 0.000000 1.000000 > filter: > 1920x1080 (0x12a) 103.7MHz *current > h: width 1920 start 0 end 0 total 1920 skew 0 clock 54.0KHz > v: height 1080 start 0 end 0 total 1080 clock 50.0Hz > 1920x1080 (0x12b) 105.8MHz > h: width 1920 start 0 end 0 total 1920 skew 0 clock 55.1KHz > v: height 1080 start 0 end 0 total 1080 clock 51.0Hz > 800x600 (0x12c) 25.0MHz > h: width 800 start 0 end 0 total 800 skew 0 clock 31.2KHz > v: height 600 start 0 end 0 total 600 clock 52.0Hz > > > The problem does not occur, when I use VGA instead of HDMI. The xrandr output: > xrandr --verbose > Screen 0: minimum 320 x 240, current 1920 x 1080, maximum 1920 x 1080 > default connected 1920x1080+0+0 (0x12a) normal (normal) 0mm x 0mm > Identifier: 0x129 > Timestamp: 1630366 > Subpixel: unknown > Clones: > CRTC: 0 > CRTCs: 0 > Transform: 1.000000 0.000000 0.000000 > 0.000000 1.000000 0.000000 > 0.000000 0.000000 1.000000 > filter: > 1920x1080 (0x12a) 124.4MHz *current > h: width 1920 start 0 end 0 total 1920 skew 0 clock 64.8KHz > v: height 1080 start 0 end 0 total 1080 clock 60.0Hz > > My setup: > The Mainboard is a Asus M3n78-EM. The GPU is a Nvidia 8300. > It does not matter, whether I use vdpau or not for the xine output. > The xorg.conf, that I use can be found here: > http://wbreu.htpc-forum.de/downloads/xorg.confsinglescreen > > Attached a log with logverbose 6. > > I would greatly appreciate any help. > > Greetings, > Hendrik > <Xorg.0.log.gz> > _______________________________________________ > [email protected]: X.Org support > Archives: http://lists.freedesktop.org/archives/xorg > Info: http://lists.freedesktop.org/mailman/listinfo/xorg > Your subscription address: [email protected] _______________________________________________ [email protected]: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.freedesktop.org/mailman/listinfo/xorg Your subscription address: [email protected]
