Hello, I have a very odd problem with my new TV.I only get an output to it, when runnig xine or vdr-sxfe, which is a xine based frontend to VDR.
As soon, as I stop xine, the TV shows "LG, No Signal".I can start nvidia-settings then, but it does not show up. Still I get "LG, No Signal". Only, when I don't stop xine, and start nvidia-settings (or any other X application) on top of xine, I see the application.
This is odd already. But it get's better. The output of xrandr does not change between the two (working/not working) states:
xrandr --verbose
Screen 0: minimum 800 x 600, current 1920 x 1080, maximum 1920 x 1080
default connected 1920x1080+0+0 (0x12a) normal (normal) 0mm x 0mm
Identifier: 0x129
Timestamp: 22991
Subpixel: unknown
Clones:
CRTC: 0
CRTCs: 0
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
1920x1080 (0x12a) 103.7MHz *current
h: width 1920 start 0 end 0 total 1920 skew 0 clock
54.0KHz
v: height 1080 start 0 end 0 total 1080 clock
50.0Hz
1920x1080 (0x12b) 105.8MHzh: width 1920 start 0 end 0 total 1920 skew 0 clock 55.1KHz v: height 1080 start 0 end 0 total 1080 clock 51.0Hz
800x600 (0x12c) 25.0MHzh: width 800 start 0 end 0 total 800 skew 0 clock 31.2KHz v: height 600 start 0 end 0 total 600 clock 52.0Hz
The problem does not occur, when I use VGA instead of HDMI. The xrandr output:
xrandr --verbose
Screen 0: minimum 320 x 240, current 1920 x 1080, maximum 1920 x 1080
default connected 1920x1080+0+0 (0x12a) normal (normal) 0mm x 0mm
Identifier: 0x129
Timestamp: 1630366
Subpixel: unknown
Clones:
CRTC: 0
CRTCs: 0
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
1920x1080 (0x12a) 124.4MHz *current
h: width 1920 start 0 end 0 total 1920 skew 0 clock
64.8KHz
v: height 1080 start 0 end 0 total 1080 clock
60.0Hz
My setup: The Mainboard is a Asus M3n78-EM. The GPU is a Nvidia 8300. It does not matter, whether I use vdpau or not for the xine output.The xorg.conf, that I use can be found here: http://wbreu.htpc-forum.de/downloads/xorg.confsinglescreen
Attached a log with logverbose 6. I would greatly appreciate any help. Greetings, Hendrik
Xorg.0.log.gz
Description: application/gzip
_______________________________________________ [email protected]: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.freedesktop.org/mailman/listinfo/xorg Your subscription address: [email protected]
