On Thu,  5 Jul 2018 18:16:42 +0100
Daniel Stone <[email protected]> wrote:

> Use the extended GBM allocator interface to support modifiers and
> multi-planar BOs.
> 
> Signed-off-by: Daniel Stone <[email protected]>
> Tested-by: Emre Ucan <[email protected]>
> ---
>  configure.ac               |  3 ++
>  libweston/compositor-drm.c | 61 +++++++++++++++++++++++++++++++-------
>  2 files changed, 53 insertions(+), 11 deletions(-)
> 

Hi,

I feel there are two parts in this patch which are not clearly
discussed in the commit message. The changes to drm_fb_get_from_bo()
affect all three of BUFFER_CLIENT, BUFFER_GBM_SURFACE and BUFFER_CURSOR
cases. The changes to drm_output_init_egl() affect only the
BUFFER_GBM_SURFACE case.

If I understand right, this mainly affects GBM import from wl_buffer
and GBM surface use cases.

Is this the final patch that makes etnaviv work? That would be nice to
mention.


> diff --git a/configure.ac b/configure.ac
> index c550198ae..357b6471e 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -215,6 +215,9 @@ if test x$enable_drm_compositor = xyes; then
>    PKG_CHECK_MODULES(DRM_COMPOSITOR_FORMATS_BLOB, [libdrm >= 2.4.83],
>                   [AC_DEFINE([HAVE_DRM_FORMATS_BLOB], 1, [libdrm supports 
> modifier advertisement])],
>                   [AC_MSG_WARN([libdrm does not support modifier 
> advertisement])])
> +  PKG_CHECK_MODULES(DRM_COMPOSITOR_GBM_MODIFIERS, [gbm >= 17.1],
> +                 [AC_DEFINE([HAVE_GBM_MODIFIERS], 1, [GBM supports 
> modifiers])],
> +                 [AC_MSG_WARN([GBM does not support modifiers])])
>    PKG_CHECK_MODULES(DRM_COMPOSITOR_GBM, [gbm >= 17.2],
>                   [AC_DEFINE([HAVE_GBM_FD_IMPORT], 1, [gbm supports import 
> with modifiers])],
>                   [AC_MSG_WARN([GBM does not support dmabuf import, will omit 
> that capability])])
> diff --git a/libweston/compositor-drm.c b/libweston/compositor-drm.c
> index 3f8e77554..3471d9b0f 100644
> --- a/libweston/compositor-drm.c
> +++ b/libweston/compositor-drm.c
> @@ -871,7 +871,7 @@ drm_fb_addfb(struct drm_fb *fb)
>       int ret = -EINVAL;
>  #ifdef HAVE_DRM_ADDFB2_MODIFIERS
>       uint64_t mods[4] = { };
> -     int i;
> +     size_t i;
>  #endif
>  
>       /* If we have a modifier set, we must only use the WithModifiers
> @@ -880,7 +880,7 @@ drm_fb_addfb(struct drm_fb *fb)
>               /* KMS demands that if a modifier is set, it must be the same
>                * for all planes. */
>  #ifdef HAVE_DRM_ADDFB2_MODIFIERS
> -             for (i = 0; i < (int) ARRAY_LENGTH(mods) && fb->handles[i]; i++)
> +             for (i = 0; i < ARRAY_LENGTH(mods) && fb->handles[i]; i++)

This is an unrelated change and would ideally be in a separate patch so
it could land ahead of time.

>                       mods[i] = fb->modifier;
>               ret = drmModeAddFB2WithModifiers(fb->fd, fb->width, fb->height,
>                                                fb->format->format,
> @@ -1114,6 +1114,9 @@ drm_fb_get_from_bo(struct gbm_bo *bo, struct 
> drm_backend *backend,
>                  bool is_opaque, enum drm_fb_type type)
>  {
>       struct drm_fb *fb = gbm_bo_get_user_data(bo);
> +#ifdef HAVE_GBM_MODIFIERS
> +     int i;
> +#endif
>  
>       if (fb) {
>               assert(fb->type == type);
> @@ -1127,15 +1130,25 @@ drm_fb_get_from_bo(struct gbm_bo *bo, struct 
> drm_backend *backend,
>       fb->type = type;
>       fb->refcnt = 1;
>       fb->bo = bo;
> +     fb->fd = backend->drm.fd;
>  
>       fb->width = gbm_bo_get_width(bo);
>       fb->height = gbm_bo_get_height(bo);
> +     fb->format = pixel_format_get_info(gbm_bo_get_format(bo));
> +     fb->size = 0;

Making the size zero should have a rationale in the commit message.

> +
> +#ifdef HAVE_GBM_MODIFIERS
> +     fb->modifier = gbm_bo_get_modifier(bo);
> +     for (i = 0; i < gbm_bo_get_plane_count(bo); i++) {
> +             fb->strides[i] = gbm_bo_get_stride_for_plane(bo, i);
> +             fb->handles[i] = gbm_bo_get_handle_for_plane(bo, i).u32;
> +             fb->offsets[i] = gbm_bo_get_offset(bo, i);
> +     }
> +#else
>       fb->strides[0] = gbm_bo_get_stride(bo);
>       fb->handles[0] = gbm_bo_get_handle(bo).u32;
> -     fb->format = pixel_format_get_info(gbm_bo_get_format(bo));
>       fb->modifier = DRM_FORMAT_MOD_INVALID;
> -     fb->size = fb->strides[0] * fb->height;
> -     fb->fd = backend->drm.fd;
> +#endif
>  
>       if (!fb->format) {
>               weston_log("couldn't look up format 0x%lx\n",
> @@ -4212,13 +4225,39 @@ drm_output_init_egl(struct drm_output *output, struct 
> drm_backend *b)
>               fallback_format_for(output->gbm_format),
>       };
>       int n_formats = 1;
> +     struct weston_mode *mode = output->base.current_mode;
> +     struct drm_plane *plane = output->scanout_plane;
> +     unsigned int i;
> +
> +     for (i = 0; i < plane->count_formats; i++) {
> +             if (plane->formats[i].format == output->gbm_format)
> +                     break;
> +     }
> +
> +     if (i == plane->count_formats) {
> +             weston_log("format 0x%x not supported by output %s\n",
> +                        output->gbm_format, output->base.name);
> +             return -1;
> +     }
> +
> +#ifdef HAVE_GBM_MODIFIERS
> +     if (plane->formats[i].count_modifiers > 0) {
> +             output->gbm_surface =
> +                     gbm_surface_create_with_modifiers(b->gbm,
> +                                                       mode->width,
> +                                                       mode->height,
> +                                                       output->gbm_format,
> +                                                       
> plane->formats[i].modifiers,
> +                                                       
> plane->formats[i].count_modifiers);
> +     } else
> +#endif
> +     {
> +             output->gbm_surface =
> +                 gbm_surface_create(b->gbm, mode->width, mode->height,
> +                                    output->gbm_format,
> +                                    GBM_BO_USE_RENDERING | 
> GBM_BO_USE_SCANOUT);
> +     }
>  
> -     output->gbm_surface = gbm_surface_create(b->gbm,
> -                                          output->base.current_mode->width,
> -                                          output->base.current_mode->height,
> -                                          format[0],
> -                                          GBM_BO_USE_SCANOUT |
> -                                          GBM_BO_USE_RENDERING);
>       if (!output->gbm_surface) {
>               weston_log("failed to create gbm surface\n");
>               return -1;

Aside from split and rationale, this change looks good.


Thanks,
pq

Attachment: pgphgVNeFR8J7.pgp
Description: OpenPGP digital signature

_______________________________________________
wayland-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/wayland-devel

Reply via email to