Dear Sebastian, I am sorry for late reply due to customer meeting.
That's great process in your side. I am still working for porting i.MX6Q FEC driver after I added FreeBSD's i.MX6 FEC driver code on rtems-libbsd. But, Because my custom board have different PHY chip(RTL8201E), I did't port FEC drier on i.MX6Q board. I used fdt loading method, too. If possible, please could you let me know i.MX6Q hardware board information which you are successful for porting FEC driver ? On referencing, I am working to port SMP for i.MX6Q. At this time, current version is not stable. I am looking technical reason. Best Regards, JunBeom Kim ~~~~~~~~~~~~~~~~~~~~~~ Technical Director Coressent Korea Phone:+82-2-522-2247 Fax :+82-2-522-2129 Mobile:+82-10-6425-5720 Email: jb...@coressentkorea.co.kr Web: www.coressentkorea.co.kr ~~~~~~~~~~~~~~~~~~~~~~ -----Original Message----- From: Sebastian Huber [mailto:sebastian.hu...@embedded-brains.de] Sent: Wednesday, September 27, 2017 3:25 PM To: JunBeom Kim (Coressent) <jb...@coressentkorea.co.kr>; users@rtems.org Subject: Re: Coressent Korea - Freescale i.MX6 RTEMS/Qt SDK Release Information. On 26/09/17 15:55, Sebastian Huber wrote: > Did you experience a similar problem? I found the problem. The i.MX7D needs a 64 byte receive buffer alignment in contrast to the 16 byte alignment required by previous FEC versions. -- Sebastian Huber, embedded brains GmbH Address : Dornierstr. 4, D-82178 Puchheim, Germany Phone : +49 89 189 47 41-16 Fax : +49 89 189 47 41-09 E-Mail : sebastian.hu...@embedded-brains.de PGP : Public key available on request. Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG. _______________________________________________ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users
