** Description changed:
+ 20120331:
+ I tried
linux-image-3.3.0-030300rc7-generic_3.3.0-030300rc7.201203101735_i386.deb
+ That's the one you meant, right?
+
+
+ 20120330:
When I startup without BT cardbus card inserted in my laptop, here is no
issue. I insert BT cardbus card, and it works, too (although av headset output
seems not available).
lspci adds these lines to the existing list when I insert the bt cardbus card:
03:00.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 62)
03:00.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 62)
and this is what happens in dmesg:
[ 872.020055] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted
into slot 0
[ 872.020110] pci 0000:03:00.0: [1106:3038] type 0 class 0x000c03
[ 872.020178] pci 0000:03:00.0: reg 14: [mem 0x00000000-0x000000ff]
[ 872.020245] pci 0000:03:00.0: reg 20: [io 0xfce0-0xfcff]
[ 872.020359] pci 0000:03:00.0: supports D1 D2
[ 872.020366] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 872.020380] pci 0000:03:00.0: PME# disabled
[ 872.020427] pci 0000:03:00.1: [1106:3038] type 0 class 0x000c03
[ 872.020488] pci 0000:03:00.1: reg 14: [mem 0x00000000-0x000000ff]
[ 872.020554] pci 0000:03:00.1: reg 20: [io 0xfce0-0xfcff]
[ 872.020659] pci 0000:03:00.1: supports D1 D2
[ 872.020665] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 872.020677] pci 0000:03:00.1: PME# disabled
[ 872.020722] pci 0000:03:00.0: BAR 1: assigned [mem 0x84000000-0x840000ff]
[ 872.020738] pci 0000:03:00.0: BAR 1: set to [mem 0x84000000-0x840000ff]
(PCI address [0x84000000-0x840000ff])
[ 872.020748] pci 0000:03:00.1: BAR 1: assigned [mem 0x84000100-0x840001ff]
[ 872.020762] pci 0000:03:00.1: BAR 1: set to [mem 0x84000100-0x840001ff]
(PCI address [0x84000100-0x840001ff])
[ 872.020772] pci 0000:03:00.0: BAR 4: assigned [io 0xe000-0xe01f]
[ 872.020785] pci 0000:03:00.0: BAR 4: set to [io 0xe000-0xe01f] (PCI
address [0xe000-0xe01f])
[ 872.020794] pci 0000:03:00.1: BAR 4: assigned [io 0xe020-0xe03f]
[ 872.020809] pci 0000:03:00.1: BAR 4: set to [io 0xe020-0xe03f] (PCI
address [0xe020-0xe03f])
[ 872.021058] uhci_hcd 0000:03:00.0: enabling device (0000 -> 0003)
[ 872.021079] uhci_hcd 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ
19
[ 872.021107] uhci_hcd 0000:03:00.0: UHCI Host Controller
[ 872.021300] uhci_hcd 0000:03:00.0: new USB bus registered, assigned bus
number 4
[ 872.021369] uhci_hcd 0000:03:00.0: irq 19, io base 0x0000e000
[ 872.021813] hub 4-0:1.0: USB hub found
[ 872.021827] hub 4-0:1.0: 2 ports detected
[ 872.022200] uhci_hcd 0000:03:00.1: enabling device (0000 -> 0003)
[ 872.022219] uhci_hcd 0000:03:00.1: PCI INT A -> GSI 19 (level, low) -> IRQ
19
[ 872.022247] uhci_hcd 0000:03:00.1: UHCI Host Controller
[ 872.022405] uhci_hcd 0000:03:00.1: new USB bus registered, assigned bus
number 5
[ 872.022471] uhci_hcd 0000:03:00.1: irq 19, io base 0x0000e020
[ 872.022890] hub 5-0:1.0: USB hub found
[ 872.022905] hub 5-0:1.0: 2 ports detected
[ 872.332089] usb 4-1: new full speed USB device number 2 using uhci_hcd
[ 873.040583] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 873.057170] uhci_hcd 0000:03:00.1: host system error, PCI problems?
[ 873.057183] uhci_hcd 0000:03:00.1: host controller halted, very bad!
[ 873.057220] uhci_hcd 0000:03:00.1: HC died; cleaning up
[ 873.058481] usbcore: registered new interface driver btusb
When I start up with BT cardbus card inserted, the wired NIC is disabled
(lshw -C network) and I have no idea how to enable it. When I eject the cardbus
card, the wired NIC stays disabled.
Laptop is dualboot: Windows XP has no issues with either situation;
everything works as it should.
ProblemType: Bug
DistroRelease: Ubuntu 11.10
Package: linux-image-3.0.0-17-generic 3.0.0-17.30
ProcVersionSignature: Ubuntu 3.0.0-17.30-generic 3.0.22
Uname: Linux 3.0.0-17-generic i686
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 1.23-0ubuntu4
Architecture: i386
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: Slmodemd 912 F.... slmodemd
/dev/snd/pcmC1D0c: Slmodemd 912 F...m slmodemd
/dev/snd/pcmC1D0p: Slmodemd 912 F...m slmodemd
/dev/snd/controlC0: vince 1373 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'IXP'/'ATI IXP rev 2 with ALC655 at 0xfbdfc800, irq 17'
Mixer name : 'Realtek ALC655 rev 0'
Components : 'AC97a:414c4760'
Controls : 41
Simple ctrls : 26
Card1.Amixer.info:
Card hw:1 'Modem'/'ATI IXP Modem rev 2 at 0xfbdfcc00, irq 17'
Mixer name : 'Silicon Laboratory Si3036,8 rev 15'
Components : 'AC97m:53494c2f'
Controls : 3
Simple ctrls : 3
Card1.Codecs.codec97.0.mc97.1.1:
1-1/0: Silicon Laboratory Si3036,8 rev 15
Extended modem ID: codec=1 LIN1
Modem status : GPIO MREF ADC1 DAC1 PRE(ADC2) PRF(DAC2) PRG(HADC)
PRH(HDAC)
Line1 rate : 8000Hz
Date: Fri Mar 30 13:56:57 2012
HibernationDevice: RESUME=UUID=817f5be7-c629-40b3-ad64-ecc3a23d5467
InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release i386 (20111012)
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 1267:0210 Logic3 / SpectraVideo plc
MachineType: MICRO-STAR INT'L CO.,LTD MS-1013
PccardctlIdent:
Socket 0:
no product info available
PccardctlStatus:
Socket 0:
no card
ProcEnviron:
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-17-generic
root=UUID=19a63679-2bb2-497b-b8a1-0d2f1a330033 ro quiet splash vt.handoff=7
PulseSinks: Error: command ['pacmd', 'list-sinks'] failed with exit code 1:
No PulseAudio daemon running, or not running as session daemon.
PulseSources: Error: command ['pacmd', 'list-sources'] failed with exit code
1: No PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
linux-restricted-modules-3.0.0-17-generic N/A
linux-backports-modules-3.0.0-17-generic N/A
linux-firmware 1.60
RfKill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 12/13/2006
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: A1013AMS V6.80
dmi.board.name: MS-1013
dmi.board.vendor: MSI
dmi.board.version: 1.0
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: MICRO-STAR INT'L CO.,LTD
dmi.chassis.version: N/A
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvrA1013AMSV6.80:bd12/13/2006:svnMICRO-STARINT'LCO.,LTD:pnMS-1013:pvr0131:rvnMSI:rnMS-1013:rvr1.0:cvnMICRO-STARINT'LCO.,LTD:ct10:cvrN/A:
dmi.product.name: MS-1013
dmi.product.version: 0131
dmi.sys.vendor: MICRO-STAR INT'L CO.,LTD
** Tags removed: needs-upstream-testing
** Tags added: kernel-bug-exists-upstream
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/968888
Title:
BT cardbus card and wired NIC incompatibility? 11.10
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/968888/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
