On Fri, Oct 24, 2025 at 04:59:23PM +0800, Hal Feng wrote: > VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S industrial > SoC which can run at -40~85 degrees centigrade and up to 1.25GHz. > > Board features: > - JH7110S SoC > - 4/8 GiB LPDDR4 DRAM > - AXP15060 PMIC > - 40 pin GPIO header > - 1x USB 3.0 host port > - 3x USB 2.0 host port > - 1x M.2 M-Key (size: 2242) > - 1x MicroSD slot (optional non-removable 64GiB eMMC) > - 1x QSPI Flash > - 1x I2C EEPROM > - 1x 1Gbps Ethernet port > - SDIO-based Wi-Fi & UART-based Bluetooth > - 1x HDMI port > - 1x 2-lane DSI > - 1x 2-lane CSI > > VisionFive 2 Lite schematics: > https://doc-en.rvspace.org/VisionFive2Lite/PDF/VF2_LITE_V1.10_TF_20250818_SCH.pdf > VisionFive 2 Lite Quick Start Guide: > https://doc-en.rvspace.org/VisionFive2Lite/VisionFive2LiteQSG/index.html > More documents: https://doc-en.rvspace.org/Doc_Center/visionfive_2_lite.html > > Note: Patch 1 and 2 are the kernel device tree picked from [1]. They are > just for test and please ignore them because dts/upstream should be synced > with devicetree-rebasing. > > [1] > https://lore.kernel.org/all/[email protected]/ > > Changes since RFC: > - Rebase on the latest mainline. > - Improve the commit messages. > - Drop patch 7. > patch 3, 4: > - Return 0 instead of 0xFF if read_eeprom() fails. > patch 5: > - Keep default FORMAT_VERSION 0x2. > - Change wifi_bt field to onboard_module field and use bit 0 to mark > WIFI/BT. > - Drop all "no_eth0", "no_eth1" configuration. > > History: > RFC: > https://lore.kernel.org/all/[email protected]/ > > Hal Feng (9): > riscv: dts: starfive: jh7110-common: Move out some nodes to the board > dts > riscv: dts: starfive: Add VisionFive 2 Lite board device tree > eeprom: starfive: Simplify get_ddr_size_from_eeprom() > eeprom: starfive: Correct get_pcb_revision_from_eeprom() > eeprom: starfive: Support eeprom data format v3 > pcie: starfive: Add a optional power gpio support > configs: visionfive2: Add VisionFive 2 Lite DT to OF_LIST > board: starfive: spl: Support VisionFive 2 Lite > board: starfive: visionfive2: Add VisionFive 2 Lite fdt selection > > arch/riscv/cpu/jh7110/spl.c | 2 +- > arch/riscv/include/asm/arch-jh7110/eeprom.h | 13 +- > board/starfive/visionfive2/spl.c | 3 + > .../visionfive2/starfive_visionfive2.c | 2 + > .../visionfive2/visionfive2-i2c-eeprom.c | 64 ++++--- > configs/starfive_visionfive2_defconfig | 2 +- > drivers/pci/pcie_starfive_jh7110.c | 8 + > .../src/riscv/starfive/jh7110-common.dtsi | 22 --- > .../jh7110-deepcomputing-fml13v01.dts | 49 ++++++ > .../src/riscv/starfive/jh7110-milkv-mars.dts | 49 ++++++ > .../riscv/starfive/jh7110-pine64-star64.dts | 49 ++++++ > .../jh7110-starfive-visionfive-2.dtsi | 46 +++++ > dts/upstream/src/riscv/starfive/jh7110.dtsi | 16 -- > .../jh7110s-starfive-visionfive-2-lite.dts | 159 ++++++++++++++++++ > 14 files changed, 418 insertions(+), 66 deletions(-) > create mode 100644 > dts/upstream/src/riscv/starfive/jh7110s-starfive-visionfive-2-lite.dts
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
