Am Dienstag, dem 02.09.2025 um 07:25 +0000 schrieb Teresa Remmet: > Hello Yannic, > > Am Donnerstag, dem 14.08.2025 um 14:05 +0200 schrieb Yannic Moog: > > OP-TEE configs are enabled by default, change the doc to no longer > > declare OP-TEE as optional. > > Further, phycore-imx8mm and imx8mm-phygate-tauri-l use different > > build > > instructions, so dissolve the common file for building OP-TEE. > > While at it, introduce style changes where export commands are no > > longer > > used. > > you do a lot of changes in this commit. The firmware version change is > not mentioned in the commit message.
Thanks, forgot that. > I think it would be easier to > follow your changes if you split the commit into multiple ones here. Ok, will update doc style and then add change related doc. Yannic > > Kind Regards, > Teresa > > > > > Signed-off-by: Yannic Moog <[email protected]> > > --- > > board/phytec/phycore_imx8mm/MAINTAINERS | 1 - > > doc/board/phytec/imx8mm-optee-build.rsti | 14 ---------- > > doc/board/phytec/imx8mm-phygate-tauri-l.rst | 42 ++++++++++++++++++- > > --------- > > doc/board/phytec/phycore-imx8mm.rst | 43 > > +++++++++++++++++++---------- > > doc/board/phytec/phycore-imx8mp.rst | 41 ++++++++++++++----- > > -------- > > 5 files changed, 79 insertions(+), 62 deletions(-) > > > > diff --git a/board/phytec/phycore_imx8mm/MAINTAINERS > > b/board/phytec/phycore_imx8mm/MAINTAINERS > > index > > 7631e1cb331b608335620d0db49104459f673d1d..58c5e2d0af9fe404a5995fecc96 > > cdbaa5845f979 100644 > > --- a/board/phytec/phycore_imx8mm/MAINTAINERS > > +++ b/board/phytec/phycore_imx8mm/MAINTAINERS > > @@ -9,6 +9,5 @@ F: configs/imx8mm-phygate-tauri-l_defconfig > > F: configs/phycore-imx8mm_defconfig > > F: doc/board/phytec/imx8mm-phygate-tauri-l.rst > > F: doc/board/phytec/index.rst > > -F: doc/board/phytec/imx8mm-optee-build.rsti > > F: doc/board/phytec/phycore_imx8mm.rst > > F: include/configs/phycore_imx8mm.h > > diff --git a/doc/board/phytec/imx8mm-optee-build.rsti > > b/doc/board/phytec/imx8mm-optee-build.rsti > > deleted file mode 100644 > > index > > c83de5cc7cf4a0229cbd89f4c7d2bfd8448cb735..000000000000000000000000000 > > 0000000000000 > > --- a/doc/board/phytec/imx8mm-optee-build.rsti > > +++ /dev/null > > @@ -1,14 +0,0 @@ > > -Build the OP-TEE binary (optional) > > ----------------------------------- > > - > > -.. code-block:: bash > > - > > - $ git clone https://github.com/OP-TEE/optee_os.git > > - $ cd optee_os > > - $ make CFG_TEE_BENCHMARK=n \ > > - CROSS_COMPILE=aarch64-linux-gnu- \ > > - O=out/arm \ > > - PLATFORM=imx-mx8mmevk \ > > - CFG_TZDRAM_START=0x56000000 \ > > - CFG_DDR_SIZE=0x80000000 \ > > - CFG_UART_BASE=UART3_BASE > > diff --git a/doc/board/phytec/imx8mm-phygate-tauri-l.rst > > b/doc/board/phytec/imx8mm-phygate-tauri-l.rst > > index > > 0d9e1024f8c5300e91a3a4c18b2babd5853a0824..4dd82cd9785fa585ed216664a25 > > f593d4e723dbb 100644 > > --- a/doc/board/phytec/imx8mm-phygate-tauri-l.rst > > +++ b/doc/board/phytec/imx8mm-phygate-tauri-l.rst > > @@ -9,7 +9,7 @@ Quick Start > > ----------- > > > > - Build the ARM Trusted firmware binary > > -- Build the OP-TEE binary (optional) > > +- Build the OP-TEE binary > > - Get ddr firmware > > - Build U-Boot > > - Boot > > @@ -21,23 +21,35 @@ Build the ARM Trusted firmware binary > > > > $ git clone > > https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git > > $ cd trusted-firmware-a > > - $ export CROSS_COMPILE=aarch64-linux-gnu- > > - $ export IMX_BOOT_UART_BASE=0x30880000 > > - $ # with optee > > - $ make PLAT=imx8mm BL32_BASE=0x56000000 SPD=opteed bl31 > > - $ # without optee > > - $ make PLAT=imx8mm bl31 > > + $ make -j $(nproc) \ > > + CROSS_COMPILE=aarch64-linux-gnu- \ > > + PLAT=imx8mm \ > > + IMX_BOOT_UART_BASE=0x30880000 \ > > + BL32_BASE=0xbe000000 \ > > + SPD=opteed \ > > + bl31 > > > > -.. include:: imx8mm-optee-build.rsti > > +Build the OP-TEE binary > > +----------------------- > > + > > +.. code-block:: bash > > + > > + $ git clone https://github.com/OP-TEE/optee_os.git > > + $ cd optee_os > > + $ make -j $(nproc) \ > > + CROSS_COMPILE=aarch64-linux-gnu- \ > > + CFG_TEE_BENCHMARK=n \ > > + O=out/arm \ > > + PLATFORM=imx-mx8mm_phygate_tauri_l > > > > Get the ddr firmware > > -------------------- > > > > .. code-block:: bash > > > > - $ wget > > https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.23.bin > > - $ chmod +x firmware-imx-8.23.bin > > - $ ./firmware-imx-8.23.bin > > + $ wget > > https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin > > + $ chmod +x firmware-imx-8.28-994fa14.bin > > + $ ./firmware-imx-8.28-994fa14.bin > > > > Build U-Boot for SD card > > ------------------------ > > @@ -49,15 +61,17 @@ Copy binaries > > > > $ cp <TF-A dir>/build/imx8mm/release/bl31.bin . > > $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin > > - $ cp firmware-imx-8.23/firmware/ddr/synopsys/lpddr4*.bin . > > + $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin > > . > > > > Build U-Boot > > ^^^^^^^^^^^^ > > > > .. code-block:: bash > > > > - $ make imx8mm-phygate-tauri-l_defconfig > > - $ make flash.bin > > + $ make -j $(nproc) > > + CROSS_COMPILE=aarch64-linux-gnu- \ > > + imx8mm-phygate-tauri-l_defconfig \ > > + flash.bin > > > > Flash SD card > > ^^^^^^^^^^^^^ > > diff --git a/doc/board/phytec/phycore-imx8mm.rst > > b/doc/board/phytec/phycore-imx8mm.rst > > index > > 08f5949e02d8d2bfba71867d93c2b3ed8fdc67e2..d5edbc91474e95f677dd12e5fcc > > 6c16092dea1cd 100644 > > --- a/doc/board/phytec/phycore-imx8mm.rst > > +++ b/doc/board/phytec/phycore-imx8mm.rst > > @@ -9,7 +9,7 @@ Quick Start > > ----------- > > > > - Build the ARM Trusted firmware binary > > -- Build the OP-TEE binary (optional) > > +- Build the OP-TEE binary > > - Get ddr firmware > > - Build U-Boot > > - Boot > > @@ -21,23 +21,35 @@ Build the ARM Trusted firmware binary > > > > $ git clone > > https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git > > $ cd trusted-firmware-a > > - $ export CROSS_COMPILE=aarch64-linux-gnu- > > - $ export IMX_BOOT_UART_BASE=0x30880000 > > - $ # with optee > > - $ make PLAT=imx8mm BL32_BASE=0x56000000 SPD=opteed bl31 > > - $ # without optee > > - $ make PLAT=imx8mm bl31 > > + $ make -j $(nproc) \ > > + CROSS_COMPILE=aarch64-linux-gnu- \ > > + PLAT=imx8mm \ > > + IMX_BOOT_UART_BASE=0x30880000 \ > > + BL32_BASE=0x7e000000 \ > > + SPD=opteed \ > > + bl31 > > > > -.. include:: imx8mm-optee-build.rsti > > +Build the OP-TEE binary > > +----------------------- > > + > > +.. code-block:: bash > > + > > + $ git clone https://github.com/OP-TEE/optee_os.git > > + $ cd optee_os > > + $ make -j $(nproc) \ > > + CROSS_COMPILE=aarch64-linux-gnu- \ > > + CFG_TEE_BENCHMARK=n \ > > + O=out/arm \ > > + PLATFORM=imx-mx8mm_phyboard_polis > > > > Get the ddr firmware > > -------------------- > > > > .. code-block:: bash > > > > - $ wget > > https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.19.bin > > - $ chmod +x firmware-imx-8.19.bin > > - $ ./firmware-imx-8.19.bin > > + $ wget > > https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin > > + $ chmod +x firmware-imx-8.28-994fa14.bin > > + $ ./firmware-imx-8.28-994fa14.bin > > > > Build U-Boot for SD card > > ------------------------ > > @@ -48,15 +60,18 @@ Copy binaries > > .. code-block:: bash > > > > $ cp <TF-A dir>/build/imx8mm/release/bl31.bin . > > - $ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin . > > + $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin > > + $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin > > . > > > > Build U-Boot > > ^^^^^^^^^^^^ > > > > .. code-block:: bash > > > > - $ make phycore-imx8mm_defconfig > > - $ make flash.bin > > + $ make -j $(nproc) \ > > + CROSS_COMPILE=aarch64-linux-gnu- \ > > + phycore-imx8mm_defconfig \ > > + flash.bin > > > > Flash SD card > > ^^^^^^^^^^^^^ > > diff --git a/doc/board/phytec/phycore-imx8mp.rst > > b/doc/board/phytec/phycore-imx8mp.rst > > index > > 50be99126537a2dc5323bd49c1513b196182c5f3..cea3a2835e69d6c6d3aa4c16698 > > aebd09f73bf49 100644 > > --- a/doc/board/phytec/phycore-imx8mp.rst > > +++ b/doc/board/phytec/phycore-imx8mp.rst > > @@ -3,13 +3,13 @@ > > phyCORE-i.MX 8M Plus > > ==================== > > > > -The phyCORE-i.MX 8M Plus with 2GB of main memory is supported. > > +The phyCORE-i.MX 8M Plus with 1,2,4GB of main memory is supported. > > > > Quick Start > > ----------- > > > > - Build the ARM Trusted firmware binary > > -- Build the OP-TEE binary (optional) > > +- Build the OP-TEE binary > > - Get ddr firmware > > - Build U-Boot > > - Boot > > @@ -21,12 +21,13 @@ Build the ARM Trusted firmware binary > > > > $ git clone > > https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git > > $ cd trusted-firmware-a > > - $ export CROSS_COMPILE=aarch64-linux-gnu- > > - $ export IMX_BOOT_UART_BASE=0x30860000 > > - $ # with optee > > - $ make PLAT=imx8mp SPD=opteed bl31 > > - $ # without optee > > - $ make PLAT=imx8mp bl31 > > + $ make -j $(nproc) \ > > + CROSS_COMPILE=aarch64-linux-gnu- \ > > + PLAT=imx8mp \ > > + IMX_BOOT_UART_BASE=0x30860000 \ > > + BL32_BASE=0x7e000000 \ > > + SPD=opteed \ > > + bl31 > > > > Build the OP-TEE binary (optional) > > ---------------------------------- > > @@ -35,20 +36,20 @@ Build the OP-TEE binary (optional) > > > > $ git clone https://github.com/OP-TEE/optee_os.git > > $ cd optee_os > > - $ make CFG_TEE_BENCHMARK=n \ > > - CROSS_COMPILE=aarch64-linux-gnu- \ > > - O=out/arm \ > > - PLATFORM=imx-mx8mp_phyboard_pollux \ > > - CFG_TZDRAM_START=0x56000000 > > + $ make -j $(nproc) \ > > + CROSS_COMPILE=aarch64-linux-gnu- \ > > + CFG_TEE_BENCHMARK=n \ > > + O=out/arm \ > > + PLATFORM=imx-mx8mp_phyboard_pollux > > > > Get the ddr firmware > > -------------------- > > > > .. code-block:: bash > > > > - $ wget > > https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.19.bin > > - $ chmod +x firmware-imx-8.19.bin > > - $ ./firmware-imx-8.19.bin > > + $ wget > > https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin > > + $ chmod +x firmware-imx-8.28-994fa14.bin > > + $ ./firmware-imx-8.28-994fa14.bin > > > > Build U-Boot for SD card > > ------------------------ > > @@ -60,15 +61,17 @@ Copy binaries > > > > $ cp <TF-A dir>/build/imx8mp/release/bl31.bin . > > $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin > > - $ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin . > > + $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin > > . > > > > Build U-Boot > > ^^^^^^^^^^^^ > > > > .. code-block:: bash > > > > - $ make phycore-imx8mp_defconfig > > - $ make flash.bin > > + $ make -j $(nproc) \ > > + CROSS_COMPILE=aarch64-linux-gnu- \ > > + phycore-imx8mp_defconfig \ > > + flash.bin > > > > Flash SD card > > ^^^^^^^^^^^^^ > > > > -- > PHYTEC Messtechnik GmbH | Barcelona-Allee 1 | 55129 Mainz, Germany > > Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber, > Dipl.-Ing. (FH) Markus Lickes | Handelsregister Mainz HRB 4656 | > Finanzamt Mainz | St.Nr. 26/665/00608, DE 149059855
