Hello, Am Tue, Feb 11, 2025 at 04:23:13PM +0530 schrieb Sughosh Ganu: > On Mon, 20 Jan 2025 at 15:43, Alexander Dahl <[email protected]> wrote: > > > > Hello, > > > > Am Mon, Jan 20, 2025 at 02:40:38PM +0530 schrieb Sughosh Ganu: > > > On Fri, 17 Jan 2025 at 16:40, Alexander Dahl <[email protected]> wrote: > > > > […] > > > > > > This changeset breaks build with CONFIG_CC_OPTIMIZE_FOR_DEBUG=y for > > > > me. In a usual non-debug build, everything is fine. However in a > > > > debug build now I get this error: > > > > > > > > UPD include/generated/timestamp_autogenerated.h > > > > GEN Makefile > > > > Using /mnt/data/adahl/src/u-boot as source for U-Boot > > > > CC common/version.o > > > > AR common/built-in.o > > > > LD u-boot > > > > arm-v5te-linux-gnueabi-ld.bfd: lib/lmb.o: in function > > > > `lmb_map_update_notify': > > > > /mnt/data/adahl/src/u-boot/lib/lmb.c:458: undefined reference to > > > > `efi_add_memory_map_pg' > > > > > > Can you share the details of the toolchain that you are using, where > > > can I download it from. And the target that you build which shows this > > > up. Thanks. > > > > Although I'm actually building with ptxdist and > > OSELAS.Toolchain-2023.07.1/arm-v5te-linux-gnueabi for a custom board, > > you should be able to reproduce the behaviour easily with buildman on > > master when building for boards sam9x60ek or sam9x60_curiosity like > > this: > > > > buildman -o ~/build/u-boot/buildman -e -a CC_OPTIMIZE_FOR_DEBUG sam9x60 > > > > My output when running the above is this: > > Sorry, I haven't spent time debugging this issue, although this is on > my todo list. Btw, since you already have a working setup, can you > please reset your tree to the following commit and then check if that > fixes your issue. > > 92e75ee47f1 ("board_r: Remove duplicate headers")
Does not change anything. Note: my tree is not special in any way, it's a clean mainline u-boot checkout and I'm building for a board with an in tree config. Everyone should be able to reproduce this by using configs/sam9x60_curiosity_mmc_defconfig, enabling CC_OPTIMIZE_FOR_DEBUG and building with the default toolchain downloaded by buildman, which is also mainline u-boot tooling. My assumption is: some efi code is pulled in unconditionally here, but efi is not enabled on armv5 and it can not be enabled, efi is not needed on this target anyways. Furthermore: I assume the code is optimized out when doing a normal build without CC_OPTIMIZE_FOR_DEBUG, which is basically building without optimizations and keeping debug symbols. Greets Alex > > -sughosh > > > > > % buildman -o ~/build/u-boot/buildman -e -a CC_OPTIMIZE_FOR_DEBUG > > sam9x60 > > Building current source for 5 boards (5 threads, 4 jobs per thread) > > arm: + sam9x60_curiosity_mmc1 > > +arm-linux-gnueabi-ld.bfd: lib/lmb.o: in function > > `lmb_map_update_notify': > > +lib/lmb.c:458: undefined reference to `efi_add_memory_map_pg' > > +make[1]: *** [Makefile:1824: u-boot] Fehler 1 > > +make: *** [Makefile:177: sub-make] Error 2 > > arm: + sam9x60_curiosity_mmc > > +arm-linux-gnueabi-ld.bfd: lib/lmb.o: in function > > `lmb_map_update_notify': > > +lib/lmb.c:458: undefined reference to `efi_add_memory_map_pg' > > +make[1]: *** [Makefile:1824: u-boot] Fehler 1 > > +make: *** [Makefile:177: sub-make] Error 2 > > arm: + sam9x60ek_mmc > > +arm-linux-gnueabi-ld.bfd: lib/lmb.o: in function > > `lmb_map_update_notify': > > +lib/lmb.c:458: undefined reference to `efi_add_memory_map_pg' > > +make[1]: *** [Makefile:1824: u-boot] Fehler 1 > > +make: *** [Makefile:177: sub-make] Error 2 > > arm: + sam9x60ek_qspiflash > > +arm-linux-gnueabi-ld.bfd: lib/lmb.o: in function > > `lmb_map_update_notify': > > +lib/lmb.c:458: undefined reference to `efi_add_memory_map_pg' > > +make[1]: *** [Makefile:1824: u-boot] Fehler 1 > > +make: *** [Makefile:177: sub-make] Error 2 > > arm: + sam9x60ek_nandflash > > +arm-linux-gnueabi-ld.bfd: lib/lmb.o: in function > > `lmb_map_update_notify': > > +lib/lmb.c:458: undefined reference to `efi_add_memory_map_pg' > > +make[1]: *** [Makefile:1824: u-boot] Fehler 1 > > +make: *** [Makefile:177: sub-make] Error 2 > > 0 0 5 /5 0:00:40 : sam9x60ek_nandflash > > Completed: 5 total built, 5 newly), duration 0:00:22, rate 0.23 > > > > Greets > > Alex > >
