u-boot  

Messages by Thread

• Re: [PATCH] video: exynos: node variable should not be unsigned Minkyu Kang
• Re: [PATCH v6 0/8] m68k: Add support for QEMU virt machine Tom Rini
• Re: [PATCH v2 1/3] arm: mach-k3: j721s2: Provide a way to obtain boot device for non SPLs Tom Rini
• Re: [PATCH v3 0/6] clk: support arbitrary clk_register() sequence Tom Rini
  • Re: [PATCH v3 0/6] clk: support arbitrary clk_register() sequence Yang Xiwen
  • Re: [PATCH v3 0/6] clk: support arbitrary clk_register() sequence Tom Rini
  • Re: [PATCH v3 0/6] clk: support arbitrary clk_register() sequence Yang Xiwen
  • Re: [PATCH v3 0/6] clk: support arbitrary clk_register() sequence Tom Rini
• [RFC PATCH 0/4] add software ecdsa support Philippe Reynes
  • [RFC PATCH 4/4] drivers: crypto: add software ecdsa support Philippe Reynes
  • [RFC PATCH 2/4] ecdsa: initial support of ecdsa using mbedtls Philippe Reynes
  • [RFC PATCH 1/4] mbedtls: enable support of ecc Philippe Reynes
  • Re: [RFC PATCH 1/4] mbedtls: enable support of ecc Raymond Mao
  • [RFC PATCH 3/4] test: lib: sw_ecdsa: add initial test Philippe Reynes
  • Re: [RFC PATCH 0/4] add software ecdsa support Raymond Mao
  • Re: [RFC PATCH 0/4] add software ecdsa support Tom Rini
  • Re: [RFC PATCH 0/4] add software ecdsa support Marko Mäkelä
  • Re: [RFC PATCH 0/4] add software ecdsa support Raymond Mao
  • Re: [RFC PATCH 0/4] add software ecdsa support Marko Mäkelä
  • Re: [RFC PATCH 0/4] add software ecdsa support Raymond Mao
  • Re: [RFC PATCH 0/4] add software ecdsa support Marko Mäkelä
  • Re: [RFC PATCH 0/4] add software ecdsa support Marko Mäkelä
  • Re: [RFC PATCH 0/4] add software ecdsa support Marko Mäkelä
  • Re: [RFC PATCH 0/4] add software ecdsa support Marko Mäkelä
• Re: [PATCH 0/3] Add simple-framebuffer support for supported Exynos 7870 devices Minkyu Kang
• [PATCH] board: ti: j721e,j7200: fix do_main_cpsw0_qsgmii_phyinit Siddharth Vadapalli
  • Re: [PATCH] board: ti: j721e,j7200: fix do_main_cpsw0_qsgmii_phyinit Anshul Dalal
  • Re: [PATCH] board: ti: j721e,j7200: fix do_main_cpsw0_qsgmii_phyinit Siddharth Vadapalli
  • Re: [PATCH] board: ti: j721e,j7200: fix do_main_cpsw0_qsgmii_phyinit Anshul Dalal
  • Re: [PATCH] board: ti: j721e,j7200: fix do_main_cpsw0_qsgmii_phyinit Siddharth Vadapalli
  • Re: [PATCH] board: ti: j721e,j7200: fix do_main_cpsw0_qsgmii_phyinit Anshul Dalal
  • Re: [PATCH] board: ti: j721e,j7200: fix do_main_cpsw0_qsgmii_phyinit Tom Rini
• [PATCH v2 0/5] clk: mediatek: mt8188: fix clocks Julien Stephan
  • [PATCH v2 1/5] clk: mediatek: mt8188: remove separate topckgen-cg driver Julien Stephan
  • [PATCH v2 2/5] clk: mediatek: mt8188: fix circular clock dependency Julien Stephan
  • [PATCH v2 3/5] clk: mediatek: mt8188: add missing fixed clock Julien Stephan
  • [PATCH v2 4/5] clk: mediatek: mt8188: fix some clock parents Julien Stephan
  • [PATCH v2 5/5] clk: mediatek: mt8188: refactor driver to improve readability Julien Stephan
  • Re: [PATCH v2 0/5] clk: mediatek: mt8188: fix clocks Tom Rini
• [PATCH] board: mediatek: add MT8395 EVK board support Julien Stephan
• [PATCH] pinctrl: mediatek: add pinctrl driver for MT8195 Julien Stephan
  • Re: [PATCH] pinctrl: mediatek: add pinctrl driver for MT8195 Tom Rini
• [PATCH 0/3] Add MT8195 support Julien Stephan
  • [PATCH 1/3] arm: mediatek: add support for MediaTek MT8195 SoC Julien Stephan
  • [PATCH 2/3] clk: mediatek: implement GATE_FLAGS macro Julien Stephan
  • [PATCH 3/3] clk: mediatek: add MT8195 clock driver Julien Stephan
  • Re: [PATCH 0/3] Add MT8195 support Tom Rini
• [PATCH] efi_loader: Improve EFI variable load message Pranav Tilak
  • Re: [PATCH] efi_loader: Improve EFI variable load message Heinrich Schuchardt
  • Re: [PATCH] efi_loader: Improve EFI variable load message Ilias Apalodimas
• RE: [PATCH v2 0/2] Modern pinctrl for Exynos5250 devices Minkyu Kang
  • Re: [PATCH v2 0/2] Modern pinctrl for Exynos5250 devices Lukas Timmermann
• Re: [PATCH master] arch: arm: dts: k3: refactor common nodes to k3-*-r5.dtsi Anshul Dalal
  • Re: [PATCH master] arch: arm: dts: k3: refactor common nodes to k3-*-r5.dtsi Tom Rini
  • Re: [PATCH master] arch: arm: dts: k3: refactor common nodes to k3-*-r5.dtsi Wadim Egorov
  • Re: [PATCH master] arch: arm: dts: k3: refactor common nodes to k3-*-r5.dtsi Bryan Brattlof
  • Re: [PATCH master] arch: arm: dts: k3: refactor common nodes to k3-*-r5.dtsi Anshul Dalal
  • Re: [PATCH master] arch: arm: dts: k3: refactor common nodes to k3-*-r5.dtsi Bryan Brattlof
  • Re: [PATCH master] arch: arm: dts: k3: refactor common nodes to k3-*-r5.dtsi Bryan Brattlof
  • Re: [PATCH master] arch: arm: dts: k3: refactor common nodes to k3-*-r5.dtsi Tom Rini
• [PATCH v2] board: mediatek: add MT8390 EVK board support Julien Stephan
  • Re: [PATCH v2] board: mediatek: add MT8390 EVK board support Mattijs Korpershoek
  • Re: [PATCH v2] board: mediatek: add MT8390 EVK board support Tom Rini
• U-Boot website? Wadim Egorov
  • Re: U-Boot website? Tom Rini
• [PATCH v2 0/4] remoteproc: support i.MX95 Peng Fan (OSS)
  • [PATCH v2 1/4] remoteproc: imx: Support ECC initialization Peng Fan (OSS)
  • [PATCH v2 2/4] remoteproc: imx: Add i.MX95 support Peng Fan (OSS)
  • [PATCH v2 3/4] arm: dts: imx95: Add cm7 node Peng Fan (OSS)
  • [PATCH v2 4/4] imx95_evk: Enable remoteproc for i.MX95 EVK Peng Fan (OSS)
• [PATCH v2 0/3] arm: agilex5: Enable high-speed MMC modes for SD and eMMC Tanmay Kathpalia
  • [PATCH v2 1/3] arm: dts: agilex5: Fix DT property naming convention Tanmay Kathpalia
  • Re: [PATCH v2 1/3] arm: dts: agilex5: Fix DT property naming convention Chee, Tien Fong
  • [PATCH v2 2/3] arm: agilex5: Enable SD card UHS mode support Tanmay Kathpalia
  • Re: [PATCH v2 2/3] arm: agilex5: Enable SD card UHS mode support Chee, Tien Fong
  • [PATCH v2 3/3] arm: agilex5: Enable eMMC HS200 and HS400 mode support Tanmay Kathpalia
  • Re: [PATCH v2 3/3] arm: agilex5: Enable eMMC HS200 and HS400 mode support Chee, Tien Fong
• Re: [PATCH RESEND 0/2] Support for Samsung Exynos 7870 USB PHY device in driver Kaustabh Chakraborty
  • Re: [PATCH RESEND 0/2] Support for Samsung Exynos 7870 USB PHY device in driver Mattijs Korpershoek
• [PATCH 0/7] ARM: Add RV1103 Omega4 board support Fabio Estevam
  • [PATCH 1/7] pinctrl: rockchip: Add support for RV1103 Fabio Estevam
  • Re: [PATCH 1/7] pinctrl: rockchip: Add support for RV1103 Jonas Karlman
  • [PATCH 2/7] clk: rockchip: Add support for RV1103 Fabio Estevam
  • [PATCH 4/7] rockchip: spl-boot-order: Add SPI NAND support Fabio Estevam
  • [PATCH 5/7] spl: Add SPI NAND support via MTD in SPL Fabio Estevam
  • [PATCH 3/7] tools: rkcommon: Add rv1103 support Fabio Estevam
  • Re: [PATCH 3/7] tools: rkcommon: Add rv1103 support Jonas Karlman
  • [PATCH 6/7] ARM: dts: Add RV1103 Omega4 support Fabio Estevam
  • [PATCH 7/7] omega4-rv1103: Add initial support Fabio Estevam
  • Re: [PATCH 0/7] ARM: Add RV1103 Omega4 board support Jonas Karlman
  • Re: [PATCH 0/7] ARM: Add RV1103 Omega4 board support Fabio Estevam
• [PATCH v2 00/12] rockchip: Add initial support for RK3506 Jonas Karlman
  • [PATCH v2 01/12] rockchip: spl: Add common handling of USB bootsource_id 0x81 Jonas Karlman
  • [PATCH v2 02/12] rockchip: mkimage: Re-sort the spl_infos list alphanumerically Jonas Karlman
  • [PATCH v2 03/12] rockchip: mkimage: Add support for RK3506 Jonas Karlman
  • [PATCH v2 04/12] ram: rockchip: Add basic support for RK3506 Jonas Karlman
  • [PATCH v2 05/12] dt-bindings: clock: rockchip: Add RK3506 clock and reset unit Jonas Karlman
  • [PATCH v2 06/12] clk: rockchip: Add support for RK3506 Jonas Karlman
  • [PATCH v2 07/12] pinctrl: rockchip: Use syscon_regmap_lookup_by_phandle() Jonas Karlman
  • [PATCH v2 08/12] pinctrl: rockchip: Add support for RK3506 Jonas Karlman
  • [PATCH v2 09/12] rockchip: otp: Add support for RK3506 Jonas Karlman
  • [PATCH v2 11/12] net: dwc_eth_qos_rockchip: Add support for RK3506 Jonas Karlman
  • [PATCH v2 10/12] phy: rockchip-inno-usb2: Add support for RK3506 Jonas Karlman
  • [PATCH v2 12/12] arch: arm: rockchip: Add initial support for RK3506 Jonas Karlman
  • Re: [PATCH v2 00/12] rockchip: Add initial support for RK3506 Jonas Karlman
• [PATCH] board: ge: common: vpd: Fix read_i2c_vpd return value Francois Berder
• Re: [PATCH v3 3/3] mtd: mtdpart: fix partitions searching Mikhail Kshevetskiy
• [PATCH] pinctrl: mediatek: set MT798x rev as MTK_PINCTRL_V1 Shiji Yang
  • Re: [PATCH] pinctrl: mediatek: set MT798x rev as MTK_PINCTRL_V1 Tom Rini
• [PATCH 0/7] net: airoha: mdio support for the switch Mikhail Kshevetskiy
  • [PATCH 1/7] net: airoha_eth: fix mdio binding to switch device Mikhail Kshevetskiy
  • [PATCH 2/7] net: airoha_eth: use proper switch node for en7523 case Mikhail Kshevetskiy
  • [PATCH 3/7] net: mdio-mt7531-mmio: fix switch regs initialization Mikhail Kshevetskiy
  • [PATCH 4/7] configs: an7581: add mii/mdio support Mikhail Kshevetskiy
  • [PATCH 5/7] arm: dts: an7581: add mdio child node to switch node Mikhail Kshevetskiy
  • [PATCH 6/7] configs: en7523: add mii/mdio support Mikhail Kshevetskiy
  • [PATCH 7/7] arm: dts: en7523: add mdio child node to switch node Mikhail Kshevetskiy
• [PATCH] CI: Update to using grub-2.14 for our tests Tom Rini
  • Re: [PATCH] CI: Update to using grub-2.14 for our tests Tom Rini
• [PATCH] spl: Ensure final section before BSS is non-empty Tom Rini
  • Re: [PATCH] spl: Ensure final section before BSS is non-empty Sune Brian
  • [PATCH v2] arm: spl: Ensure 8 byte alignment of appended DTB without separate BSS Tom Rini
  • Re: [PATCH v2] arm: spl: Ensure 8 byte alignment of appended DTB without separate BSS Phil Sutter
  • Re: [PATCH v2] arm: spl: Ensure 8 byte alignment of appended DTB without separate BSS Sune Brian
  • Re: [PATCH v2] arm: spl: Ensure 8 byte alignment of appended DTB without separate BSS Marek Vasut
  • Re: [PATCH v2] arm: spl: Ensure 8 byte alignment of appended DTB without separate BSS Tom Rini
  • Re: [PATCH v2] arm: spl: Ensure 8 byte alignment of appended DTB without separate BSS Greg Malysa
  • Re: [PATCH v2] arm: spl: Ensure 8 byte alignment of appended DTB without separate BSS Tom Rini
  • Re: [PATCH v2] arm: spl: Ensure 8 byte alignment of appended DTB without separate BSS Tom Rini
• Unchecked IPv6 payload length leads to Out-of-Bounds read in net_ip6_handler Jayakrishna Menon Vadayath
• [PATCH 0/3] Code improvements and argument checks for mmc dev subcommand Yao Zi
  • [PATCH 2/3] cmd: mmc: Check whether arguments are valid numbers in dev subcommand Yao Zi
  • [PATCH 1/3] cmd: mmc: Simplify dev subcommand handling Yao Zi
  • [PATCH 3/3] cmd: mmc: Return symbolic value when part switching fails in mmc dev Yao Zi
  • Re: [PATCH 0/3] Code improvements and argument checks for mmc dev subcommand Anshul Dalal
  • Re: [PATCH 0/3] Code improvements and argument checks for mmc dev subcommand Peng Fan
  • Re: [PATCH 0/3] Code improvements and argument checks for mmc dev subcommand Peng Fan (OSS)
• Re: [PATCH v7 0/5] Added QCOM RPMH Power Domain Driver Aswin Murugan
• [PATCH v5 0/2] dm: core: Support same compatible in host/gadget musb drivers Markus Schneider-Pargmann (TI.com)
  • [PATCH v5 1/2] usb: musb-new: Relative ctrl_mod address parsing Markus Schneider-Pargmann (TI.com)
  • Re: [PATCH v5 1/2] usb: musb-new: Relative ctrl_mod address parsing Marek Vasut
  • Re: [PATCH v5 1/2] usb: musb-new: Relative ctrl_mod address parsing Markus Schneider-Pargmann
  • Re: [PATCH v5 1/2] usb: musb-new: Relative ctrl_mod address parsing Marek Vasut
  • [PATCH v5 2/2] usb: musb-new: Add compatibles for ti,musb-am33xx Markus Schneider-Pargmann (TI.com)
  • Re: [PATCH v5 2/2] usb: musb-new: Add compatibles for ti,musb-am33xx Marek Vasut
• [PATCH v2 0/6] arm: k3: j722s: add PCIe support George McCollister
  • [PATCH v2 3/6] phy: cadence-torrent: Add support to drive refclk out George McCollister
  • [PATCH v2 4/6] pci: pcie_cdns_ti: Add support to provide refclk to PCIe connector George McCollister
  • [PATCH v2 5/6] pci: pcie_cdns_ti: Add PCIe support for J722S SoC George McCollister
  • [PATCH v2 1/6] pci: skip unnecessary PCIe scanning George McCollister
  • [PATCH v2 6/6] configs: j722s_evm_a53_defconfig: enable PCIe George McCollister
  • [PATCH v2 2/6] phy: ti: j721e-wiz: Enable reference clock output in cmn_refclk_<p/m> George McCollister
  • Re: [PATCH v2 0/6] arm: k3: j722s: add PCIe support Tom Rini
• [PATCH] board: ti: am62ax: tifs-rm-cfg.yaml: Add C7x resource allocation entries Paresh Bhagat
  • Re: [PATCH] board: ti: am62ax: tifs-rm-cfg.yaml: Add C7x resource allocation entries Tom Rini
• [PATCH] mtd: spi-nor: ids: Add support for Puyasemi flash chips Ssunk
  • Re: [PATCH] mtd: spi-nor: ids: Add support for Puyasemi flash chips Anshul Dalal
  • Re: [PATCH] mtd: spi-nor: ids: Add support for Puyasemi flash chips Clus Tom
• [PATCH] xilinx: Enable NFS support for all Xilinx platforms Pranav Tilak
  • Re: [PATCH] xilinx: Enable NFS support for all Xilinx platforms Michal Simek
• Re: [PATCH v6 4/8] sysreset: Add QEMU virtual system controller driver Heinrich Schuchardt
  • Re: [PATCH v6 4/8] sysreset: Add QEMU virtual system controller driver Kuan-Wei Chiu
• [PATCH] mmc: add support for JESD84-B51B with CSD_REV 9 Gregory Baudet
  • Re: [PATCH] mmc: add support for JESD84-B51B with CSD_REV 9 Peng Fan
• Re: [PATCH V2 0/4] USB Fixes for Gadget Mode on DWC3 Mattijs Korpershoek
• Re: [PATCH v5 2/3] efi_var: Unify read/write access helper function Ilias Apalodimas
• Re: [PATCH v5 1/3] efi_var_file: refactor to move buffer functions Ilias Apalodimas
  • Re: [PATCH v5 1/3] efi_var_file: refactor to move buffer functions Michal Simek
• Re: [PATCH] efi_loader: fix use after free in efi_exit() with tcg2 Ilias Apalodimas
• Re: [PATCH 1/3] gpio: Add GPIO delay driver Peng Fan
  • Re: [PATCH 1/3] gpio: Add GPIO delay driver Michal Simek
  • Re: [PATCH 1/3] gpio: Add GPIO delay driver Peng Fan
  • Re: [PATCH 1/3] gpio: Add GPIO delay driver Tom Rini
  • Re: [PATCH 1/3] gpio: Add GPIO delay driver Michal Simek
• [PATCH 1/2] env: Provide another work-around for unquoting fdtfile vagrant
  • [PATCH 2/2] board: sifive: unmatched: set fdtfile with unquoted variable. vagrant
  • Re: [PATCH 1/2] env: Provide another work-around for unquoting fdtfile Tom Rini
  • Re: [PATCH 1/2] env: Provide another work-around for unquoting fdtfile Tom Rini
• [PATCH v1] Fix unbootable ARMv7 devices Brian Sune
  • Re: [PATCH v1] Fix unbootable ARMv7 devices Tom Rini
  • Re: [PATCH v1] Fix unbootable ARMv7 devices Sune Brian
  • Re: [PATCH v1] Fix unbootable ARMv7 devices Tom Rini
  • Re: [PATCH v1] Fix unbootable ARMv7 devices Sune Brian
• [PATCH] mtd: nand: raw: atmel: Access device ofnode through functions Andy Yan
  • Re: [PATCH] mtd: nand: raw: atmel: Access device ofnode through functions Eugen Hristev
• rk3588 MNT Reform2 fails to boot from SD card Vagrant Cascadian
  • Re: rk3588 MNT Reform2 fails to boot from SD card Peng Fan
  • Re: rk3588 MNT Reform2 fails to boot from SD card Vagrant Cascadian
  • Re: rk3588 MNT Reform2 fails to boot from SD card Quentin Schulz
  • Re: rk3588 MNT Reform2 fails to boot from SD card Vagrant Cascadian
  • Re: rk3588 MNT Reform2 fails to boot from SD card Quentin Schulz
  • Re: rk3588 MNT Reform2 fails to boot from SD card Vagrant Cascadian
• [PATCH 0/6] usb: eth: asix88179: Use a fixed URB buffer size and misc cleanup Jonas Karlman
  • [PATCH 1/6] usb: eth: asix88179: Use negative ECOMM return value Jonas Karlman
  • Re: [PATCH 1/6] usb: eth: asix88179: Use negative ECOMM return value Marek Vasut
  • [PATCH 2/6] usb: eth: asix88179: Use a fixed URB buffer size of 16 KiB Jonas Karlman
  • Re: [PATCH 2/6] usb: eth: asix88179: Use a fixed URB buffer size of 16 KiB Marek Vasut
  • Re: [PATCH 2/6] usb: eth: asix88179: Use a fixed URB buffer size of 16 KiB Jonas Karlman
  • Re: [PATCH 2/6] usb: eth: asix88179: Use a fixed URB buffer size of 16 KiB Jonas Karlman
  • Re: [PATCH 2/6] usb: eth: asix88179: Use a fixed URB buffer size of 16 KiB Marek Vasut

• Earlier messages
• Later messages