Hi Quetin， 在 2024-08-12 16:23:06，"Quentin Schulz" <[email protected]> 写道： >Hi Andy, > >>> @@ -323,5 +329,6 @@ source "board/rockchip/evb_rk3588/Kconfig" >>> source "board/rockchip/toybrick_rk3588/Kconfig" >>> source "board/theobroma-systems/jaguar_rk3588/Kconfig" >>> source "board/theobroma-systems/tiger_rk3588/Kconfig" >>> +source "board/coolpi/genbook/Kconfig" >> > >Order alphabetically here. > >>> diff --git a/board/coolpi/genbook/README b/board/coolpi/genbook/README >>> new file mode 100644 >>> index 00000000000..ba165953154 >>> --- /dev/null >>> +++ b/board/coolpi/genbook/README >> > >We've moved the READMEs to doc/board/ so please do this as well. > >You may only want to add your board to doc/board/rockchip/rockchip.rst >if the instructions in that file are good enough for you. Consider >extending the content if it doesn't, and if it's too much work, then >creating your own readme in doc/board/ similar to how Theobroma Systems >boards are documented would do just fine. > >Note that those are in reStructuredText format (rST/Sphinx). > >>> diff --git >>> a/dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5-genbook.dts >>> b/dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5-genbook.dts >>> new file mode 100644 >>> index 00000000000..6418286efe4 >>> --- /dev/null >>> +++ b/dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5-genbook.dts >> >> I believe this should be turned into a separate commit, as a cherry-pick >> of an upstream DT commit. >> > >Yes, as a hint, you should be using tools/update-subtree.sh pick dts ><commit> as documented here: >https://docs.u-boot.org/en/latest/develop/devicetree/control.html#resyncing-with-devicetree-rebasing > >You may need to pick more than one commit, that is fine. > >The commit id comes from >https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git/.
The dts just landing linux-rockchip a few days agao，so it's not in the devicetree-rebasing repo， Does that mean I should wait before it landing devicetree-rebasing repo ？ > > >Cheers, >Quentin
