Hi Andy,
@@ -323,5 +329,6 @@ source "board/rockchip/evb_rk3588/Kconfig"
source "board/rockchip/toybrick_rk3588/Kconfig"
source "board/theobroma-systems/jaguar_rk3588/Kconfig"
source "board/theobroma-systems/tiger_rk3588/Kconfig"
+source "board/coolpi/genbook/Kconfig"
Order alphabetically here.
diff --git a/board/coolpi/genbook/README b/board/coolpi/genbook/README
new file mode 100644
index 00000000000..ba165953154
--- /dev/null
+++ b/board/coolpi/genbook/README
We've moved the READMEs to doc/board/ so please do this as well.
You may only want to add your board to doc/board/rockchip/rockchip.rst
if the instructions in that file are good enough for you. Consider
extending the content if it doesn't, and if it's too much work, then
creating your own readme in doc/board/ similar to how Theobroma Systems
boards are documented would do just fine.
Note that those are in reStructuredText format (rST/Sphinx).
diff --git
a/dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5-genbook.dts
b/dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5-genbook.dts
new file mode 100644
index 00000000000..6418286efe4
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5-genbook.dts
I believe this should be turned into a separate commit, as a cherry-pick
of an upstream DT commit.
Yes, as a hint, you should be using tools/update-subtree.sh pick dts
<commit> as documented here:
https://docs.u-boot.org/en/latest/develop/devicetree/control.html#resyncing-with-devicetree-rebasing
You may need to pick more than one commit, that is fine.
The commit id comes from
https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git/.
Cheers,
Quentin
