> Date: Wed, 17 Feb 2021 22:12:40 +1100
> From: Jonathan Gray <[email protected]>
>
> On Wed, Feb 17, 2021 at 11:49:27AM +0100, Mark Kettenis wrote:
> > > Date: Wed, 17 Feb 2021 20:59:06 +1100
> > > From: Jonathan Gray <[email protected]>
> > >
> > > On Wed, Feb 17, 2021 at 10:33:18AM +0100, Patrick Wildt wrote:
> > > > Am Wed, Feb 17, 2021 at 11:56:16AM +1100 schrieb Jonathan Gray:
> > > > > Add a driver for "simple-pm-bus" a way to enable a clock and/or
> > > > > power domain for a group of devices.
> > > > >
> > > > > https://www.kernel.org/doc/Documentation/devicetree/bindings/bus/simple-pm-bus.txt
> > > > >
> > > > > This is needed to use am335x/omap4 dtbs from linux 5.11.
> > > >
> > > > "A Simple Power-Managed Bus is a transparent bus that doesn't need a
> > > > real
> > > > driver, as it's typically initialized by the boot loader."
> > > >
> > > > That's a bit funny though. :-) But I think they meant "it doesn't need
> > > > a real driver, apart from the generic simple-pm-bus driver".
> > > >
> > > >
> > > > > Index: sys/dev/fdt/files.fdt
> > > > > ===================================================================
> > > > > RCS file: /cvs/src/sys/dev/fdt/files.fdt,v
> > > > > retrieving revision 1.146
> > > > > diff -u -p -r1.146 files.fdt
> > > > > --- sys/dev/fdt/files.fdt 5 Feb 2021 00:05:20 -0000 1.146
> > > > > +++ sys/dev/fdt/files.fdt 17 Feb 2021 00:49:02 -0000
> > > > > @@ -23,6 +23,10 @@ device simplepanel
> > > > > attach simplepanel at fdt
> > > > > file dev/fdt/simplepanel.c simplepanel
> > > > >
> > > > > +device simplepmbus: fdt
> > > > > +attach simplepmbus at fdt
> > > > > +file dev/fdt/simplepmbus.c simplepmbus
> > > > > +
> > > > > device sxiccmu
> > > > > attach sxiccmu at fdt
> > > > > file dev/fdt/sxiccmu.c sxiccmu
> > > > > Index: share/man/man4/Makefile
> > > > > ===================================================================
> > > > > RCS file: /cvs/src/share/man/man4/Makefile,v
> > > > > retrieving revision 1.792
> > > > > diff -u -p -r1.792 Makefile
> > > > > --- share/man/man4/Makefile 4 Feb 2021 16:25:38 -0000 1.792
> > > > > +++ share/man/man4/Makefile 17 Feb 2021 00:49:02 -0000
> > > > > @@ -72,7 +72,8 @@ MAN= aac.4 abcrtc.4 abl.4 ac97.4 acphy.4
> > > > > rl.4 rlphy.4 route.4 rsu.4 rtsx.4 rum.4 run.4 rtw.4 rtwn.4 \
> > > > > safe.4 safte.4 sbus.4 schsio.4 scsi.4 sd.4 \
> > > > > sdmmc.4 sdhc.4 se.4 ses.4 sf.4 sili.4 \
> > > > > - simpleamp.4 simpleaudio.4 simplefb.4 simplepanel.4 siop.4 sis.4
> > > > > sk.4 \
> > > > > + simpleamp.4 simpleaudio.4 simplefb.4 simplepanel.4
> > > > > simplepmbus.4 \
> > > > > + siop.4 sis.4 sk.4 \
> > > > > sm.4 smsc.4 softraid.4 spdmem.4 sdtemp.4 speaker.4 sppp.4
> > > > > sqphy.4 \
> > > > > ssdfb.4 st.4 ste.4 stge.4 sti.4 stp.4 sv.4 switch.4 sxiccmu.4 \
> > > > > sxidog.4 sximmc.4 sxipio.4 sxipwm.4 sxirsb.4 sxirtc.4 sxisid.4 \
> > > > > Index: sys/arch/armv7/conf/GENERIC
> > > > > ===================================================================
> > > > > RCS file: /cvs/src/sys/arch/armv7/conf/GENERIC,v
> > > > > retrieving revision 1.134
> > > > > diff -u -p -r1.134 GENERIC
> > > > > --- sys/arch/armv7/conf/GENERIC 4 Feb 2021 16:25:39 -0000
> > > > > 1.134
> > > > > +++ sys/arch/armv7/conf/GENERIC 17 Feb 2021 00:49:02 -0000
> > > > > @@ -31,6 +31,7 @@ config bsd swap generic
> > > > > # The main bus device
> > > > > mainbus0 at root
> > > > > simplebus* at fdt?
> > > > > +simplepmbus* at fdt?
> > > > > cpu0 at mainbus?
> > > > >
> > > > > # Cortex-A9
> > > > > Index: sys/arch/armv7/conf/RAMDISK
> > > > > ===================================================================
> > > > > RCS file: /cvs/src/sys/arch/armv7/conf/RAMDISK,v
> > > > > retrieving revision 1.119
> > > > > diff -u -p -r1.119 RAMDISK
> > > > > --- sys/arch/armv7/conf/RAMDISK 18 Jun 2020 08:48:04 -0000
> > > > > 1.119
> > > > > +++ sys/arch/armv7/conf/RAMDISK 17 Feb 2021 00:49:02 -0000
> > > > > @@ -30,6 +30,7 @@ config bsd root on rd0a swap on rd0b
> > > > > mainbus0 at root
> > > > > softraid0 at root
> > > > > simplebus* at fdt?
> > > > > +simplepmbus* at fdt?
> > > > > cpu0 at mainbus?
> > > > >
> > > > > # Cortex-A9
> > > > > --- /dev/null Wed Feb 17 11:49:05 2021
> > > > > +++ sys/dev/fdt/simplepmbus.c Tue Feb 16 17:24:55 2021
> > > > > @@ -0,0 +1,62 @@
> > > > > +/* $OpenBSD$ */
> > > > > +/*
> > > > > + * Copyright (c) 2021 Jonathan Gray <[email protected]>
> > > > > + *
> > > > > + * Permission to use, copy, modify, and distribute this software for
> > > > > any
> > > > > + * purpose with or without fee is hereby granted, provided that the
> > > > > above
> > > > > + * copyright notice and this permission notice appear in all copies.
> > > > > + *
> > > > > + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
> > > > > WARRANTIES
> > > > > + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
> > > > > + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE
> > > > > LIABLE FOR
> > > > > + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
> > > > > DAMAGES
> > > > > + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER
> > > > > IN AN
> > > > > + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
> > > > > OUT OF
> > > > > + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
> > > > > + */
> > > > > +
> > > > > +#include <sys/param.h>
> > > > > +#include <sys/device.h>
> > > > > +
> > > > > +#include <machine/fdt.h>
> > > > > +
> > > > > +#include <dev/ofw/openfirm.h>
> > > > > +#include <dev/ofw/ofw_clock.h>
> > > > > +#include <dev/ofw/ofw_power.h>
> > > > > +
> > > > > +#include <arm/simplebus/simplebusvar.h>
> > > >
> > > > Maybe like this, was we have in rkpinctrl?
> > > >
> > > > #ifdef __armv7__
> > > > #include <arm/simplebus/simplebusvar.h>
> > > > #else
> > > > #include <arm64/dev/simplebusvar.h>
> > > > #endif
> > >
> > > The known arm64 usage is quite small. The only use in
> > > 5.11 linux/arch/arm64/boot/dts/ is qcom/msm8996.dtsi
> > >
> > > Though it would be nice if a machine include could be used without the
> > > ifdef for cases like this in general.
> > >
> > > >
> > > > Generally I was wondering if we shouldn't just add this to simplebus.c
> > > > itself? You'd need to add a compatible to the match function, and in
> > > > the attach function you'd need to check for the compatible and then
> > > > do
> > > >
> > > > power_domain_enable(faa->fa_node);
> > > > clock_enable_all(faa->fa_node);
> > > >
> > > > in the if-block.
> > > >
> > > > Haven't made my mind up yet what I like better, maybe kettenis@ has an
> > > > opinion.
> > >
> > > The binding text has
> > >
> > > 'While "simple-pm-bus" follows the "simple-bus" set of properties,
> > > as specified in the Devicetree Specification, it is not an extension
> > > of "simple-bus".'
> >
> > Ceci n'est pas pas une "simple-bus"!
> >
> > Not sure what they're smoking, but for all practical purpose it is an
> > extensions of "simple-bus". Maybe there are some subtle differences
> > related to power-management. But we don't do any of that on OpenBSD
> > yet. But yes I think putting the functionality in simplebus(4) would
> > make sense.
>
> here is a diff for that which still works for me
ok kettenis@
> Index: simplebus.c
> ===================================================================
> RCS file: /cvs/src/sys/arch/arm/simplebus/simplebus.c,v
> retrieving revision 1.16
> diff -u -p -r1.16 simplebus.c
> --- simplebus.c 29 Apr 2020 15:25:07 -0000 1.16
> +++ simplebus.c 17 Feb 2021 11:07:55 -0000
> @@ -23,6 +23,8 @@
>
> #include <dev/ofw/openfirm.h>
> #include <dev/ofw/fdt.h>
> +#include <dev/ofw/ofw_clock.h>
> +#include <dev/ofw/ofw_power.h>
>
> #include <arm/fdt.h>
> #include <arm/simplebus/simplebusvar.h>
> @@ -54,10 +56,8 @@ simplebus_match(struct device *parent, v
> if (fa->fa_node == 0)
> return (0);
>
> - if (!OF_is_compatible(fa->fa_node, "simple-bus"))
> - return (0);
> -
> - return (1);
> + return (OF_is_compatible(fa->fa_node, "simple-bus") ||
> + OF_is_compatible(fa->fa_node, "simple-pm-bus"));
> }
>
> void
> @@ -108,6 +108,11 @@ simplebus_attach(struct device *parent,
> M_TEMP, M_WAITOK);
> OF_getpropintarray(sc->sc_node, "dma-ranges",
> sc->sc_dmaranges, sc->sc_dmarangeslen);
> + }
> +
> + if (OF_is_compatible(sc->sc_node, "simple-pm-bus")) {
> + power_domain_enable(sc->sc_node);
> + clock_enable_all(sc->sc_node);
> }
>
> /* Scan the whole tree. */
>
