On Tue, Oct 28, 2014 at 04:42:55AM -0600, Abel Abraham Camarillo Ojeda wrote:
> $ while sleep 1; do date; done > Tue Oct 28 04:34:04 CST 2014 > Tue Oct 28 04:34:06 CST 2014 > Tue Oct 28 04:34:08 CST 2014 > Tue Oct 28 04:34:11 CST 2014 > Tue Oct 28 04:34:13 CST 2014 > Tue Oct 28 04:34:15 CST 2014 > Tue Oct 28 04:34:17 CST 2014 > Tue Oct 28 04:34:20 CST 2014 > Tue Oct 28 04:34:22 CST 2014 > Tue Oct 28 04:34:24 CST 2014 > Tue Oct 28 04:34:26 CST 2014 > Tue Oct 28 04:34:28 CST 2014 > Tue Oct 28 04:34:31 CST 2014 > Tue Oct 28 04:34:33 CST 2014 > ^C > $ > > on another machine - the expected: > > $ while sleep 1; do date; done > Tue Oct 28 04:36:34 CST 2014 > Tue Oct 28 04:36:35 CST 2014 > Tue Oct 28 04:36:36 CST 2014 > Tue Oct 28 04:36:37 CST 2014 > ^C > $ > > > $ top | head > load averages: 0.32, 0.35, 0.16 repo.neuroservices.com.mx 04:34:46 > 46 processes: 44 idle, 1 zombie, 1 on processor > CPU0 states: 0.0% user, 0.0% nice, 0.7% system, 0.0% interrupt, 99.3% idle > CPU1 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 99.9% idle > CPU2 states: 0.0% user, 0.0% nice, 0.2% system, 0.0% interrupt, 99.8% idle > CPU3 states: 0.0% user, 0.0% nice, 0.1% system, 0.0% interrupt, 99.9% idle > Memory: Real: 23M/74M act/tot Free: 1905M Cache: 22M Swap: 0K/2303M > > PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND > 17912 root 2 0 1652K 1804K sleep/3 select 0:06 0.00% sendmail > $ > > > This machine is also an ntp server: > > $ cat /etc/ntpd.conf > # $OpenBSD: ntpd.conf,v 1.11 2009/05/18 16:13:48 stevesk Exp $ > # sample ntpd configuration file, see ntpd.conf(5) > > # Addresses to listen on (ntpd does not listen by default) > listen on * > > # sync to a single server > #server ntp.example.org > > # use a random selection of NTP Pool Time Servers > # see http://support.ntp.org/bin/view/Servers/NTPPoolServers > servers pool.ntp.org > > # use a specific local timedelta sensor (radio clock, etc) > #sensor nmea0 > > # use all detected timedelta sensors > #sensor * > $ > > any ideas about how to further debug? > > Thanks > > > dmesg: > OpenBSD 5.2 (GENERIC.MP) #368: Wed Aug 1 10:04:49 MDT 2012 Unsupported, upgrade and check again. -Otto > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 2146172928 (2046MB) > avail mem = 2066731008 (1970MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfa5b0 (48 entries) > bios0: vendor Dell Computer Corporation version "A05" date 10/04/2007 > bios0: Dell Computer Corporation PowerEdge 860 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S4 S5 > acpi0: tables DSDT FACP APIC SPCR HPET MCFG SLIC > acpi0: wakeup devices PCI0(S5) PES1(S5) PEP0(S5) PXHA(S5) PEP1(S5) > PEP2(S5) PCIS(S5) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.68 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF > cpu0: 4MB 64b/line 16-way L2 cache > cpu0: apic clock running at 586MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 4693.46 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF > cpu1: 4MB 64b/line 16-way L2 cache > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 4693.46 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF > cpu2: 4MB 64b/line 16-way L2 cache > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 4693.46 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF > cpu3: 4MB 64b/line 16-way L2 cache > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 4 > acpihpet0 at acpi0: 14318179 Hz > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (PES1) > acpiprt2 at acpi0: bus 2 (PEP0) > acpiprt3 at acpi0: bus -1 (PXHA) > acpiprt4 at acpi0: bus 3 (PEP1) > acpiprt5 at acpi0: bus 4 (PEP2) > acpiprt6 at acpi0: bus 5 (PCIS) > acpicpu0 at acpi0 > acpicpu1 at acpi0 > acpicpu2 at acpi0 > acpicpu3 at acpi0 > ipmi at mainbus0 not configured > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0x00 > ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01 > pci3 at ppb2 bus 3 > bge0 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 > (0x4101): apic 4 int 16, address 00:1d:09:f0:f9:83 > brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 > ppb3 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01 > pci4 at ppb3 bus 4 > bge1 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 > (0x4101): apic 4 int 17, address 00:1d:09:f0:f9:84 > brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 4 int 20 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 4 int 21 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 4 int 22 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 4 int 20 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 > pci5 at ppb4 bus 5 > vga1 at pci5 dev 5 function 0 "ATI ES1000" rev 0x02 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > radeondrm0 at vga1: apic 4 int 19 > drm0 at radeondrm0 > pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01 > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> ATAPI > 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 4 int 20 for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <ST31000524AS> > wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: polling > iic0 at ichiic0 > adt0 at iic0 addr 0x2e: lm96000 rev 0x68 > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > mtrr: Pentium Pro MTRR support > uhub4 at uhub0 port 3 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 2 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (085f12a48ec9e972.a) swap on wd0b dump on wd0b
