$ while sleep 1; do date; done Tue Oct 28 04:34:04 CST 2014 Tue Oct 28 04:34:06 CST 2014 Tue Oct 28 04:34:08 CST 2014 Tue Oct 28 04:34:11 CST 2014 Tue Oct 28 04:34:13 CST 2014 Tue Oct 28 04:34:15 CST 2014 Tue Oct 28 04:34:17 CST 2014 Tue Oct 28 04:34:20 CST 2014 Tue Oct 28 04:34:22 CST 2014 Tue Oct 28 04:34:24 CST 2014 Tue Oct 28 04:34:26 CST 2014 Tue Oct 28 04:34:28 CST 2014 Tue Oct 28 04:34:31 CST 2014 Tue Oct 28 04:34:33 CST 2014 ^C $
on another machine - the expected: $ while sleep 1; do date; done Tue Oct 28 04:36:34 CST 2014 Tue Oct 28 04:36:35 CST 2014 Tue Oct 28 04:36:36 CST 2014 Tue Oct 28 04:36:37 CST 2014 ^C $ $ top | head load averages: 0.32, 0.35, 0.16 repo.neuroservices.com.mx 04:34:46 46 processes: 44 idle, 1 zombie, 1 on processor CPU0 states: 0.0% user, 0.0% nice, 0.7% system, 0.0% interrupt, 99.3% idle CPU1 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 99.9% idle CPU2 states: 0.0% user, 0.0% nice, 0.2% system, 0.0% interrupt, 99.8% idle CPU3 states: 0.0% user, 0.0% nice, 0.1% system, 0.0% interrupt, 99.9% idle Memory: Real: 23M/74M act/tot Free: 1905M Cache: 22M Swap: 0K/2303M PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND 17912 root 2 0 1652K 1804K sleep/3 select 0:06 0.00% sendmail $ This machine is also an ntp server: $ cat /etc/ntpd.conf # $OpenBSD: ntpd.conf,v 1.11 2009/05/18 16:13:48 stevesk Exp $ # sample ntpd configuration file, see ntpd.conf(5) # Addresses to listen on (ntpd does not listen by default) listen on * # sync to a single server #server ntp.example.org # use a random selection of NTP Pool Time Servers # see http://support.ntp.org/bin/view/Servers/NTPPoolServers servers pool.ntp.org # use a specific local timedelta sensor (radio clock, etc) #sensor nmea0 # use all detected timedelta sensors #sensor * $ any ideas about how to further debug? Thanks dmesg: OpenBSD 5.2 (GENERIC.MP) #368: Wed Aug 1 10:04:49 MDT 2012 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2146172928 (2046MB) avail mem = 2066731008 (1970MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfa5b0 (48 entries) bios0: vendor Dell Computer Corporation version "A05" date 10/04/2007 bios0: Dell Computer Corporation PowerEdge 860 acpi0 at bios0: rev 2 acpi0: sleep states S0 S4 S5 acpi0: tables DSDT FACP APIC SPCR HPET MCFG SLIC acpi0: wakeup devices PCI0(S5) PES1(S5) PEP0(S5) PXHA(S5) PEP1(S5) PEP2(S5) PCIS(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.68 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF cpu0: 4MB 64b/line 16-way L2 cache cpu0: apic clock running at 586MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 4693.46 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF cpu1: 4MB 64b/line 16-way L2 cache cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 4693.46 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF cpu2: 4MB 64b/line 16-way L2 cache cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 4693.46 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF cpu3: 4MB 64b/line 16-way L2 cache ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PES1) acpiprt2 at acpi0: bus 2 (PEP0) acpiprt3 at acpi0: bus -1 (PXHA) acpiprt4 at acpi0: bus 3 (PEP1) acpiprt5 at acpi0: bus 4 (PEP2) acpiprt6 at acpi0: bus 5 (PCIS) acpicpu0 at acpi0 acpicpu1 at acpi0 acpicpu2 at acpi0 acpicpu3 at acpi0 ipmi at mainbus0 not configured pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0x00 ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00: msi pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01 pci3 at ppb2 bus 3 bge0 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 4 int 16, address 00:1d:09:f0:f9:83 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb3 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01 pci4 at ppb3 bus 4 bge1 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 4 int 17, address 00:1d:09:f0:f9:84 brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 4 int 20 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 4 int 21 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 4 int 22 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 4 int 20 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 pci5 at ppb4 bus 5 vga1 at pci5 dev 5 function 0 "ATI ES1000" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: apic 4 int 19 drm0 at radeondrm0 pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01 pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 4 int 20 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <ST31000524AS> wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: polling iic0 at ichiic0 adt0 at iic0 addr 0x2e: lm96000 rev 0x68 spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 mtrr: Pentium Pro MTRR support uhub4 at uhub0 port 3 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 2 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (085f12a48ec9e972.a) swap on wd0b dump on wd0b
