On 2011/06/19 02:50, Brad wrote:
> Unfortunately I don't have any systems at the moment that are supported
> for MSI (with the -current code) although they loook to be MSI capable.
> So if you have a bnx(4) adapter(s) please take this for a spin. I don't see
> any indication from the FreeBSD/Linux drivers that any of these adapters
> need any special handling.
works on an R310.
OpenBSD 4.9-current (GENERIC.MP) #1: Sun Jun 19 13:10:59 BST 2011
sthen@mh3-pl7:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4284059648 (4085MB)
avail mem = 4155891712 (3963MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xbf79c000 (66 entries)
bios0: vendor Dell Inc. version "1.5.2" date 10/15/2010
bios0: Dell Inc. PowerEdge R310
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST BERT EINJ
TCPA SSDT
acpi0: wakeup devices PCI0(S5) USBA(S0) USBB(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz, 1197.19 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz, 1196.99 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz, 1196.99 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz, 1196.99 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu3: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (LYD0)
acpiprt2 at acpi0: bus 5 (LYD2)
acpiprt3 at acpi0: bus -1 (HVD0)
acpiprt4 at acpi0: bus -1 (HVD2)
acpiprt5 at acpi0: bus 3 (PEX0)
acpiprt6 at acpi0: bus -1 (PEX2)
acpiprt7 at acpi0: bus -1 (PEX3)
acpiprt8 at acpi0: bus 2 (PEX4)
acpiprt9 at acpi0: bus 1 (COMP)
acpicpu0 at acpi0: C3, C1
acpicpu1 at acpi0: C3, C1
acpicpu2 at acpi0: C3, C1
acpicpu3 at acpi0: C3, C1
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: apic 0 int 16
pci1 at ppb0 bus 4
ppb1 at pci0 dev 5 function 0 "Intel Core PCIE" rev 0x11: apic 0 int 16
pci2 at ppb1 bus 5
mpii0 at pci2 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi
scsibus0 at mpii0: 42 targets
sd0 at scsibus0 targ 1 lun 0: <Dell, Virtual Disk, 1028> SCSI4 0/direct fixed
naa.600508e00000000013201cfbcb2f1f04
sd0: 476416MB, 512 bytes/sec, 975699968 sec total
ses0 at scsibus0 targ 10 lun 0: <DP, BACKPLANE, 1.07> SCSI3 13/enclosure
services fixed t10.DP_BACKPLANE000000
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 0 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x05
pci4 at ppb3 bus 2
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5716" rev 0x20: msi
bnx1 at pci4 dev 0 function 1 "Broadcom BCM5716" rev 0x20: msi
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 0 int 22
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci5 at ppb4 bus 1
vga1 at pci5 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 3420 LPC" rev 0x05
pciide0 at pci0 dev 31 function 2 "Intel 3400 SATA" rev 0x05: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
Data modified on freelist: word 4 of object 0xffff800000128c80 size 0x58
previous type ACPI (0xd != 0xdeadbeef)
pciide0: using apic 0 int 20 for native-PCI interrupt
pciide1 at pci0 dev 31 function 5 "Intel 3400 SATA" rev 0x05: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 0 int 21 for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L633J, D150> ATAPI 5/cdrom
removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
kbc: cmd word write error
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub2 port 1 "Standard Microsystems product 0x2514" rev 2.00/0.00 addr
3
uhub4 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub4 port 2 configuration 1 interface 0 "BTC USB Multimedia
Keyboard" rev 1.10/4.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub4 port 2 configuration 1 interface 1 "BTC USB Multimedia
Keyboard" rev 1.10/4.00 addr 3
uhidev1: iclass 3/1, 2 report ids
uhid0 at uhidev1 reportid 1: input=3, output=1, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
bnx0: address 78:2b:cb:0a:31:98
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address 78:2b:cb:0a:31:99
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
