A bugreport has been filed upstream and is now linked to this bug.
** Bug watch added: GNOME Bug Tracker #549464
http://bugzilla.gnome.org/show_bug.cgi?id=549464
** Also affects: gnome-terminal via
http://bugzilla.gnome.org/show_bug.cgi?id=549464
Importance: Unknown
Status: Unknow
Marking the bug invalid here. As it was pointed out in the gnome bug,
this is the expected behaviour. The terminal title is set when creating
the profile. So locale changes don't affect the title.
** Changed in: gnome-terminal (Ubuntu)
Status: Incomplete => Invalid
--
Window title doesn't
** Attachment added: "pgsql-common.diff"
http://launchpadlibrarian.net/19557501/pgsql-common.diff
--
installation warns about not supporting Ubuntu 8.10
https://bugs.launchpad.net/bugs/296642
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ub
Public bug reported:
Binary package hint: postgresql-common
Clean installation on Ubuntu 8.10 reports the following:
Setting up postgresql-common (90) ...
supported_versions: WARNING: Unknown Ubuntu release: 8.10
It's cosmetic, but still a bug. Attached patch fixes the problem.
** Affects: pos
Public bug reported:
Binary package hint: xserver-xorg-video-intel
Looks like xserver-xorg-video-intel package is missing a dependency for
libdrm-intel1. Starting X server with intel driver libdrm-intel1
uninstalled results in the following message in the logs:
--- snip ---
(II) LoadModule: "int
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/20108201/Dependencies.txt
** Attachment added: "LsMod.txt"
http://launchpadlibrarian.net/20108202/LsMod.txt
** Attachment added: "LsPci.txt"
http://launchpadlibrarian.net/20108203/LsPci.txt
** Attachment added: "Xorg
f. Also after
restarting pulseaudio with the commented pulse.conf, the output is
present.
I can open a new bug about the issue if it feels like a different bug,
but to me it looks like the same issue.
Regards, Sami
--
Sami Haahtinen <[EMAIL PROTECTED]>
--
No Sound in 9.04
https://bugs.launchpa
*** This bug is a duplicate of bug 299093 ***
https://bugs.launchpad.net/bugs/299093
On Wed, 2008-11-26 at 15:02 +, BUGabundo wrote:
> @Sami did u reboot, and changed the sound controls again?
Yes. Reboot didn't change pulseaudio behaviour.
- S
--
Sami Haahtinen <[EMAI
Public bug reported:
Binary package hint: xserver-xorg-video-intel
Display Preferences application writes the following to xorg.conf when
mirror display is disabled:
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Co
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/27486898/BootDmesg.txt
** Attachment added: "CurrentDmesg.txt"
http://launchpadlibrarian.net/27486899/CurrentDmesg.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/27486900/Dependencies.txt
** A
Sadly i don't have the hardware anymore that had this problem. So unless
someone else can confirm this, we should just close the bug.
--
[ipw2200] Doesn't reconnect when wireless disabled/re-enabled using kill switch
https://bugs.launchpad.net/bugs/20667
You received this bug notification because
Public bug reported:
For some reason bzr-builddeb fails to import bcfg2 packages since
0.9.3-1 version. Below are the commands needed to reproduce. Tested with
packaged version from ubuntu jaunty: 2.1.2~ubuntu1
re...@denial:/tmp/bcfg2/ > bzr init .
Created a standalone tree (format: pack-0.92)
** Bug watch added: Debian Bug tracker #493834
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=493834
** Also affects: pymsnt (Debian) via
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=493834
Importance: Unknown
Status: Unknown
--
pymsnt can't login, probably due to MSNP vers
Confirming. This should affect all versions of pymsnt.
** Changed in: pymsnt (Ubuntu)
Status: New => Confirmed
--
pymsnt can't login, probably due to MSNP version change
https://bugs.launchpad.net/bugs/255717
You received this bug notification because you are a member of Ubuntu
Bugs, whic
confirming, i'm seeing this too.
** Changed in: eggdrop (Ubuntu)
Status: New => Confirmed
--
*** stack smashing detected ***: ./eggdrop terminated
https://bugs.launchpad.net/bugs/220327
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubun
As an additional note, i'm seeing this on amd64 like the original
reporter
--
*** stack smashing detected ***: ./eggdrop terminated
https://bugs.launchpad.net/bugs/220327
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs ma
Public bug reported:
Binary package hint: rhythmbox
Rhythmbox 0.11.6 crashes on initial startup after upgrade. The problem
appears to be in the URI canonicalisation as this is the last message in
the debug log:
(11:07:41) [0x96cb408] [rb_shell_constructor] rb-shell.c:1418: loading database
(11:0
** Attachment added: "broken rhythmdb.xml"
http://launchpadlibrarian.net/16518634/rhythmdb.xml
--
Rhythmbox crashes on URI canonicalisation
https://bugs.launchpad.net/bugs/254579
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ub
** Visibility changed to: Public
--
rhythmbox crashed with SIGSEGV in g_vfs_get_file_for_uri()
https://bugs.launchpad.net/bugs/254617
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.c
Public bug reported:
Binary package hint: gnome-terminal
The window title in gnome-terminal doesn't respect the LC_MESSAGES
variable while the rest of the text in gnome-terminal does. This can
easily be reproduced by setting the following:
LANG=fi_FI.UTF_8
LC_MESSAGES=en_US.UTF-8
and by running
There is a related (i'm not sure if it's the same bug) bugreport here
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=451422 and here
http://www.pulseaudio.org/ticket/207
--
pulseaudio crashes after a few minutes: memblock.c: Memory block too large for
pool
https://bugs.launchpad.net/bugs/25881
Public bug reported:
Binary package hint: nautilus-sendto
The latest jaunty upload (1.1.1-0ubuntu1) mentions new upstream release with
new features, but none of the new features are enabled (from build log):
configure: ** balsa plugin enabled
configure: ** bluetooth plugin enabled
configure:
The problem persists with jaunty. The distortion is gone with
pulseaudio, but still no sound without the workaround also mentioned
above:
amixer cset iface=MIXER,name='IEC958 Playback Default'
This looks more and more like an alsa bug even though the output worked
perfectly without tweaking the s
This bug has vanished on my computer with the latest uploads. Could
someone else confirm this too?
--
NetworkManager (service) SIGSEGV in nm_connection_clear_secrets() when VPN
connection fails
https://bugs.launchpad.net/bugs/318554
You received this bug notification because you are a member of
** Attachment added: "CoreDump.gz"
http://launchpadlibrarian.net/22492476/CoreDump.gz
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/22492477/Dependencies.txt
** Attachment added: "Disassembly.txt"
http://launchpadlibrarian.net/22492478/Disassembly.txt
** Attachm
Lets link this bug to the upstream bug
** Also affects: virtualbox via
http://www.virtualbox.org/ticket/1962
Importance: Unknown
Status: Unknown
--
Build fails on intrepid amd64, error: too many arguments to function
'smp_call_function'
https://bugs.launchpad.net/bugs/263080
You re
Confirming this bug, also verifying that the patch works as a temporary
fix.
** Changed in: virtualbox-ose-modules (Ubuntu)
Status: New => Confirmed
--
Build fails on intrepid amd64, error: too many arguments to function
'smp_call_function'
https://bugs.launchpad.net/bugs/263080
You rece
Attaching a patch for the manual page.
--
[Patch] Component selection support for pbuilder
https://launchpad.net/bugs/29956
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
--
3d acceleration broken in Edgy Knot 1
https://launchpad.net/bugs/54858
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
--
3d acceleration broken in Edgy Knot 1
https://launchpad.net/bugs/54858
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I can see this problem with 1.6.4. To recap (i'll attach the required
patches) Xorg.0.log says DRI enabled, glxinfo says disabled.
--
3d acceleration broken in Edgy Knot 1
https://launchpad.net/bugs/54858
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/
** Bug 54858 has been marked a duplicate of this bug
--
Slow indirect rendering after update to version 1.6.4
https://launchpad.net/bugs/55907
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
*** This bug is a duplicate of bug 55907 ***
** This bug has been marked a duplicate of bug 55907
Slow indirect rendering after update to version 1.6.4
--
3d acceleration broken in Edgy Knot 1
https://launchpad.net/bugs/54858
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://
I can verify the 'not working' state.
Rodrigo Novo wrote:
> DRI appears to be enabled on your machine, see:
>
> (II) I810(0): [drm] installed DRM signal handler
> (II) I810(0): [DRI] installation complete
> (II) I810(0): direct rendering: Enabled
I'm currently seeing:
(II) I810(0): [drm] instal
*** This bug is a duplicate of bug 34051 ***
Michael R. Head wrote:
> One of the drawbacks is that flash will lock up the web browser process
> in a few corner cases with aoss.
I wouldn't really call them corner cases. Firefox with aoss is rather
useless unless you are very careful about how and
Argh! and this is Edgy. I still can't grasp the fact that Dapper is out
already.
--
[Dapper] python-pysqlite2 is really using sqlite3
https://launchpad.net/bugs/51447
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
The more appropriate debian bug
** Changed in: python-pysqlite2 (Debian)
Bugwatch: Debian Bug tracker #361254 => Debian Bug tracker #361066
--
[Dapper] python-pysqlite2 is really using sqlite3
https://launchpad.net/bugs/51447
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:/
Public bug reported:
It looks like pysqlite2 is actually using sqlite3 as the library. There
was a bug in debian that apparently caused this.
** Affects: python-pysqlite2 (Ubuntu)
Importance: Untriaged
Status: Unconfirmed
** Affects: python-pysqlite2 (Debian)
Importance: Unknow
** Summary changed:
- [Dapper] python-pysqlite2 is really using sqlite3
+ [Edgy] python-pysqlite2 is really using sqlite3
--
[Edgy] python-pysqlite2 is really using sqlite3
https://launchpad.net/bugs/51447
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman
Jie Zhang wrote:
> Confirmed. linux-image-2.6.17-4-686 version 2.6.17-4.5 does not boot on
> Dell D610.
It might be worth mentioning that D610 has an PATA drive, but it is used
through a SATA controller (i found this a bit odd). I don't know if the
HD is used like this on other computers affected.
The latest upload fixed the cause for this.
** Changed in: python-pysqlite2 (Ubuntu)
Status: Unconfirmed => Fix Released
--
[Edgy] python-pysqlite2 is really using sqlite3
https://launchpad.net/bugs/51447
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/m
Mikael Nilsson wrote:
> How can you tell that your system has SATA -> PATA bridge? I'd like to
> check mine.
Without taking apart your computer, you should be able to see by
checking the following things. Although I can't tell how reliable these
are since i don't have access to a PATA only HW at t
Public bug reported:
Latest wine version (0.9.19-0ubuntu1) causes a consistent segfault, even
without any existing profiles.
Segfault can be reproduced here by just running wine.
** Affects: wine (Ubuntu)
Importance: Untriaged
Status: Unconfirmed
--
[Edgy] Consistent segfault whe
--
[Edgy] Consistent segfault when starting wine
https://launchpad.net/bugs/56965
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
With the latest metacity (1:2.15.34-0ubuntu1) the focus doesn't always
follow to the selected window. At the moment I'm able to reproduce this
with a few tries.
Steps to reproduce:
1. open two gnome-terminals
2. toggle between the two windows with mouse (alt-tab appears to wo
is with clicking with mouse and by using
alt-tab. I didn't try toggling from the panel.
- S
--
-< Sami Haahtinen >-
-[ Notify immediately if you do not receive this message ]-
-< 2209 3C53 D0FB 041C F7B1 F908 A9B6 F730 B83D 761C >-
-
Here are the values:
/apps/metacity/general/focus_mode: sloppy
/apps/metacity/general/focus_new_windows: smart
It's hard to take a screenshot of it as the only visual indication is
the cursor in gnome-terminal (in other apps it will just appear as
missing cursor)
It's not gnome-terminal specific
*** This bug is a duplicate of bug 51488 ***
I'm marking this bug as duplicate of bug 51488, though this bug has more
information. There are already duplicates marked for that bug. Lets make
it the master bug ;)
** This bug has been marked a duplicate of bug 51488
[Edgy] Kernel panic on boot
** Bug 51308 has been marked a duplicate of this bug
--
[Edgy] Kernel panic on boot
https://launchpad.net/bugs/51488
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Only happens when using the "mozilla" backend. gtkhtml backend works as
planned.
--
liferea segfault on startup
https://launchpad.net/bugs/52964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
Sound recorder in Dapper doesn't respect input selection on second
recording. On the first recording input selection is respected and the
correct input is used.
Steps to reproduce:
1. Start sound recorder.
2. Select input
3. Record
4. stop recording
5. Select input again (it
Public bug reported:
python-distutils.mk uses a convention for an if clause that is not
common to all POSIX shells.
instead of:
cdbs_selected_pycompat := $(shell if [[ -e debian/pycompat ]]; then cat
debian/pycompat; fi)
it should say:
cdbs_selected_pycompat := $(shell if [ -e debian/pycompat ];
--
[Edgy] Bashism in python-distutils.mk
https://launchpad.net/bugs/53563
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Adding a patch to wrap 2 cases of incomplete tests inside ifdef
DEB_PYTHON_SYSTEM clauses.
--
[Edgy] python-distutils class assumes pycentral if DEB_PYTHON_SYSTEM not defined
https://launchpad.net/bugs/53568
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailma
Public bug reported:
python-distutils.mk.in has tests that will default to pycentral if
DEB_PYTHON_SYSTEM is not defined.
Even if building without pysupport and pycentral is not recommended
anymore, there are cases where this option is required.
** Affects: cdbs (Ubuntu)
Importance: Untriag
Jérémie Corbier wrote:
> Therefore if you try to build a package following the new python policy
> (e.g. if there's a debian/pycompat file) and without defining
> DEB_PYTHON_SYSTEM the build will fail. If cdbs can't find a clue about
> whether the package follows the new or the old policy and if
>
Jérémie Corbier wrote:
> And this part can only be reached if either pysupport or pycentral is
> used.
Hmm..
I must be loosing it here. For some reason i can't reproduce this
anymore either. Or it might be that it was a bug in my packaging that i
hit without realizing it. Oh well.
Sorry for bugg
Public bug reported:
bcm43xx used to support Dell Wireless 1470 card, but doesn't support it
anymore.
when bcm43xx is manually inserted, dmesg shows:
[17180030.068000] ieee80211_crypt: registered algorithm 'NULL'
[17180030.072000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[171800
Public bug reported:
I just noticed that totem-mozilla is in universe and totem itself is in
main. Both are built from the same source. I don't really know if this
is a bug somewhere else in the archive management too because something
like this is allowed to happen.
** Affects: totem (Ubuntu)
Dennis Kaarsemaker wrote:
> THis is intentional and not a bug.
It is intentional that packages from the same source are able to exist 2
different components?
I always assumed that the package should be split in if it was
distributed in main and universe.
- S
--
totem-mozilla in universe, tote
Public bug reported:
tailor in Sid fixes issues with moved files and directories when syncing
from subversion to bzr for example.
Sid version (0.9.26-1) works and builds clean without modifications.
** Affects: tailor (Ubuntu)
Importance: Untriaged
Status: Unconfirmed
--
[Edgy] P
Public bug reported:
It appears that hardware-monitor leaks a lot of memory (significant
amounts in short time) when a monitored network interface goes down.
Steps to reproduce:
1. add hardware-monitor to your panel
2. add ethernet interface monitoring
3. run 'ifconfig eth0 down' (assuming eth0 i
Happens for me too, marking confirmed
** Changed in: hardware-monitor (Ubuntu)
Status: Unconfirmed => Confirmed
--
Hardware Monitor preferences always resets size to maximum
https://launchpad.net/bugs/30379
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.co
Elijah wrote:
> I have left that bug open however, as I'd like to get more testers to
> verify whether there is more than one bug here causing issues
I've applied the patch locally and i've been using it for an hour or so.
Usually the bug strikes a couple of times in the first hour.
So far i've b
Ole Laursen wrote:
> Could you please try the attached patch and see if it helps?
Finally got around to try this. Sad thing is that it doesn't apply to
1.2.1 and that's what Edgy has. I tried looking around in the source to
find a similar point, but apparently the bits were remodeled in 1.3.
- S
Ole Laursen wrote:
> I've looked at the source code, and AFAICT anything like this should
> only happen if something really bad is returned from GConf. Otherwise
> I've got no clue. IIRC I tried debugging this once on a Ubuntu install,
> but could not reproduce the bug after a recompile from the so
Even though this bug has been rejected, i'll jump in ;)
how about making xchat depend on xdg-utils and call xdg-open instead of
x-www-browser. xdg-open is aimed to be a generic replacement to gnome-
open and alike.
It should use the preferred applications to open the URL you want,
instead of usin
Shouldn't hal be able to detect Dell Latitude and Inspiron laptops and
load the i8k module?
--
i8k module should be loaded for Dell Inspirons
https://launchpad.net/bugs/31110
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Do you have linux-restricted-modules-generic installed? Could this be
the same as Bug #62452?
--
linux-image-2.6.17-10-generic does not see my wireless card
https://launchpad.net/bugs/70158
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu
Public bug reported:
Binary package hint: launchpad-integration
Running launchpad-integration without arguments on gutsy causes the
following error.
[EMAIL PROTECTED]:~/ > launchpad-integration
Name:
Traceback (most recent call last):
File "", line 5, in
File "/usr/share/launchpad-in
I just checked the latest package (3.16-0ubuntu1), the support is
enabled (according to build logs the files are built and installed) but
the files are still missing from the resulting package.
--
A2DP support is not included in the binary packages of bluez-utils
https://bugs.launchpad.net/bugs/1
Public bug reported:
Binary package hint: pulseaudio
All sound that comes through pulseaudio to the speakers connected to a
docking station is distorted. The output has a high pitch in it. Without
pulseaudio output is normal. The internal headphone plug is not affected
by this (and it doesn't use
This is a problem in pavumeter default behaviour. For some reason it
decides to pick an input stream as the default stream to monitor.
affects /ubuntu/pavumeter
status confirmed
It would be useful if the default output was picked instead.
importance wishlist
- S
--
Sami Haahtinen <[EM
After a bit of digging around i found this bit in Bug #55150:
-- Snip --
amixer controls %% search the id of IEC-default (at my system 35)
amixer -c 0 cset numid=35 6 %% 6 = 96kHz
-- Snip --
At the moment i don't really understand yet why it works and why things
work without pulseaudio even witho
Confirming.
** Changed in: openldap2.3 (Ubuntu)
Status: New => Confirmed
--
slapd postinst script fails due to missing slapd.conf
https://bugs.launchpad.net/bugs/163905
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ub
the
possible problem. Once this solution is labeled as working most of us
will continue working without any more thought about the issue while the
hardware could still be subjected to excess stress.
- S
--
Sami Haahtinen <[EMAIL PROTECTED]>
--
High frequency of load/unload cycles on some ha
This looks like the Bug #175744 which is filed against compiz.
--
[hardy] xserver freezes regularly
https://bugs.launchpad.net/bugs/173653
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lis
*** This bug is a duplicate of bug 175744 ***
https://bugs.launchpad.net/bugs/175744
** This bug has been marked a duplicate of bug 175744
Hardy freezes when using compiz
--
[hardy] xserver freezes regularly
https://bugs.launchpad.net/bugs/173653
You received this bug notification because
I'm attaching a backtrace of compiz while it was hung. I wasn't able to
find any debugging symbols so it might not be too helpful.
** Attachment added: "compizbt"
http://launchpadlibrarian.net/10917850/compizbt
--
Hardy freezes when using compiz
https://bugs.launchpad.net/bugs/175744
You rece
ase)
switch from one application to another.
- S
--
Sami Haahtinen <[EMAIL PROTECTED]>
--
Hardy freezes when using compiz
https://bugs.launchpad.net/bugs/175744
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mai
Assuming that the volume change fixes Bug #178504 it's a different bug.
Playback with full volume can cause such problems too, but this bug is
not caused by high volume. The distortion here sounds like digital
distortion, not analog (like the ones caused by high volume).
--
Sami Haah
virtinst package generaties python-virtinst binary. Should virt-manager
depend on that?
** Changed in: virt-manager (Ubuntu)
Status: New => Confirmed
--
cannot install virt-manager (virtinst not installable)
https://bugs.launchpad.net/bugs/179196
You received this bug notification because
it looks like this is fixed in the upcoming release. If this can't be
reproduced anymore we should close it.
--
iwlist eth1 rate shows nonsense rates
https://bugs.launchpad.net/bugs/47610
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
Public bug reported:
Binary package hint: f-spot
f-spot-sqlite-upgrade tries to use /bin/sh as the interpreter while it
uses bash like commands.
Either the interpreter should be changed to /bin/bash or the script
modified so that it works without it. The apparent culprit is the use of
>& in the
On second look >& isn't bashism, but for some reason it doesn't work in
this case with dash, but does with zsh and bash.
--
bashism in f-spot-sqlite-upgrade
https://bugs.launchpad.net/bugs/203910
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ub
Public bug reported:
When the user selects LVM as partition scheme for installation the user
is presented with the normal 'write changes to disk?' dialog. The
changes at this point have already been written to disk and selecting
'no' has no effect.
** Affects: partman-lvm (Ubuntu)
Importance
Should there be a change in the default interfaces file so that it
includes a commented IPv6 line to allow easier enabling of IPv6 support?
--
IPv6 should be disabled by default
https://launchpad.net/bugs/24828
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/ma
this same laptop also was tested with Feisty Beta minimal CD with the
same results.
--
Ubuntu installation (and live-CD) unable to boot in HP Pavilion tx1020 laptop
(AMD64, tablet), hangs
https://bugs.launchpad.net/bugs/103273
You received this bug notification because you are a member of Ubuntu
I can confirm this in a way. I think the nature of the problem changed
slightly. With recent Feisty i set all audio outputs (and the capture)
to USB audio, which was plugged in after the system booted.
All new applications use the USB Headset correctly, but applet still
follows the default audio d
** Attachment added: "Crash Log"
http://librarian.launchpad.net/5622668/_usr_bin_gossip.1000.crash
--
Semi consistent segfault during startup
https://launchpad.net/bugs/78333
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
Binary package hint: gossip-telepathy
gossip-telepathy segfaults on startup. This started with
0.21~cvs20070103-0ubuntu1 and it's still continuing with
0.21~svn20070107-0ubuntu1.
Segfault happens on almost every time gossip-telepathy is started. On
the times when the applica
Updated crash log created with 0.21~cvs20070103-0ubuntu1 latest version
didn't have debug symbols yet.
** Attachment added: "Crash Log with debug symbols"
http://librarian.launchpad.net/5624264/_usr_bin_gossip.1000.crash
--
Semi consistent segfault during startup
https://launchpad.net/bugs/78
stdout log as attachment. stderr has just one message
** (gossip:28822): CRITICAL **: dbus_g_proxy_call: assertion
`!DBUS_G_PROXY_DESTROYED (proxy)' failed
** Attachment added: "stdout with DEBUG=all"
http://librarian.launchpad.net/5625424/gossip.log
--
Semi consistent segfault during startu
e by running gabble into gdb.
I'll do that tonight, hopefully it spits out some useful info ;)
> Sorry to ask so many information ;-)
No problem, as long as we get closer to resolving the issue.. Gossip has
gone a long way since i last used it and it's well worth the trouble.
- s
Ok, it crashes like you expected. Here is the backtrace
(gdb) bt
#0 0xb7f1b410 in ?? ()
#1 0xbf8afa5c in ?? ()
#2 0x0006 in ?? ()
#3 0x16ba in ?? ()
#4 0xb7cc1df0 in raise () from /lib/tls/i686/cmov/libc.so.6
#5 0xb7cc3641 in abort () from /lib/tls/i686/cmov/libc.so.6
#6 0xb7e184b2
Public bug reported:
Binary package hint: bind9
dnsutils package contains a manual for idnconv (among others) but no
binary.
ProblemType: Bug
Date: Mon Jan 29 22:35:07 2007
DistroRelease: Ubuntu 7.04
Package: dnsutils 1:9.3.3-1ubuntu1
SourcePackage: bind9
Uname: Linux denial 2.6.20-4-generic #2
** Attachment added: "Dependencies.txt"
http://librarian.launchpad.net/5931737/Dependencies.txt
--
idnconv manual page exists, but no binary
https://launchpad.net/bugs/82178
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Is this the same bug as #57923? Even though the other bug speaks of
"when opened from thunderbird" it looks like the same problem.
--
https broken when firefox launched by Gnome to view a clicked link
https://launchpad.net/bugs/61005
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
http
This problem doesn't exist in 1.3. I just compiled 1.3 and ran the same
commands i used to reproduce this with 1.2.1, everything works normally.
Is it too late to get a new version in Edgy? New version builds without
any packaging modifications (uupdate + build).
--
[Edgy] hardware-monitor leaks
I just verified that upgrading to 1.3 fixes this problem.
--
Hardware Monitor preferences always resets size to maximum
https://launchpad.net/bugs/30379
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
1 - 100 of 173 matches
Mail list logo
