I do believe this is fixed. I do not notice it with the final
release. Thanks for the followup.
- Rod
On Aug 7, 2006, at 4:44 AM, Daniel Holbach wrote:
> Do you still see the problem in the Dapper release? Do you get any
> messages in the terminal?
>
> --
> Epiphany window closes very slowl
Thanks for your bugreport, this should be fixed with the latest upload
of gksu/libgksu in edgy. Unfortunately gksu is not build yet.
** Changed in: gksu (Ubuntu)
Assignee: (unassigned) => Michael Vogt
Status: Unconfirmed => Fix Committed
--
gksu dies on first run
https://launchpad.ne
This looks like the 1G dma bug. Please boot your machine with mem=1G, or
physically remove 1G from your machine, and retest. This way I can
confirm (and mark this bug as a duplicate).
** Changed in: linux-source-2.6.15 (Ubuntu)
Status: Unconfirmed => Needs Info
--
bcm43xx driver :kernel p
Is it possible that the RH image is just not compatible with the stock
cramfs module? I find it hard to believe that our cramfs is just plain
broken like that.
Can you create a new cramfs (on the ubuntu system) and see if that works
on Ubuntu, and then also test it on RH?
** Changed in: linux-sou
This bug report keeps screaming "bad memory" when I read it. Please run
memtest86 a few times on this machine, maybe for an hour or two to be
sure.
** Changed in: linux-source-2.6.15 (Ubuntu)
Status: Unconfirmed => Needs Info
--
kernel oops
https://launchpad.net/bugs/54907
--
ubuntu-bug
** Changed in: linux-meta (Ubuntu)
Sourcepackagename: linux-meta => linux-source-2.6.15
Assignee: (unassigned) => Ubuntu Audio Team
--
module snd-hda-intel incorrectly initializes PIN settings after suspend
https://launchpad.net/bugs/55071
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubun
Did this work prior to breezy using linux?
--
SCSI / AIC7xxx / Tape Library Problem
https://launchpad.net/bugs/54897
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
I don't have the C3 state. My laptop is an HP nc6320 with T2300E cpu.
The same output comes on a sony vaio SZ2M/B (T2300)
cat /proc/acpi/processor/CPU0/power:
active state:C2
max_cstate: C8
bus master activity:
states:
C1:
Public bug reported:
The Ubuntu 20060807.1 i386 Alternate CD install blacks the screen near
the end of the installation process. Actually, the screen is all black
with only two white cursor blocks. At that point, it is possible to
simply hit enter a couple times and then the CD is ejected. Hitting
Public bug reported:
I can not set the processor speed to its maximum. I have a centrino duo
laptop (hp nc6320 with T2300E cpu)
I can explain that with an example (on cpu1, the same for cpu0):
cat /sys/devices/system/cpu/cpu1/cpufreq/cpuinfo_max_freq
1667000
cat /sys/devices/system/cpu/cpu1/cpu
--
scroll up does not work on connect to newer version
https://launchpad.net/bugs/55688
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
Binary package hint: tsclient
Under dapper drake i connected to my windows tightvnc-dev3.7 machine
which has a larger resolution than my ubuntu workstation. I could scroll
down with ts-client, but could not scroll-up again.
Then I closed the application and the attached scre
I suspect there's also a BIOS option to disable the built-in video, or
prefer the AGP slot.
--
panic/lock/restart on dapper-amd64 if there's intel integrated video AND a
nvidia card at the same time
https://launchpad.net/bugs/55104
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https
Could you please run the following commands for me?
$ python -c 'import apt; print apt.Cache()["fglrx-
control"].isUpgradable'
$ sudo apt-get dist-upgrade -s
Preferable if the system is otherwise up-to-date? I have seen this
before I think but was not able to nail it down.
Cheers,
Michael
**
** Tags removed: eth hang intel wireless
--
Dapper: INTEL IPW 2200 B/G "unregister_netdevice: waiting for ethX to become
free. Usage count = 1"
https://launchpad.net/bugs/55182
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I'm a little confused as to what the bug is. When you upgrade, you see
all the drives, so what's the problem?
** Changed in: linux-meta (Ubuntu)
Sourcepackagename: linux-meta => linux-source-2.6.15
--
Dell 2950 w/ PERC 5i/Integrated, seeing RAID'd HDD's
https://launchpad.net/bugs/55138
--
ubun
Ah, I think that you are saying that you shouldn't see the individual
drives. I don't think that's a bug. If the hardware lets us see these
drives, then we probe them. It's up to the hardware to hide or show
these physical devices.
** Changed in: linux-source-2.6.15 (Ubuntu)
Status: Unconfi
--
panic/lock/restart on dapper-amd64 if there's intel integrated video AND a
nvidia card at the same time
https://launchpad.net/bugs/55104
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Changing udev rules for nvidia or intel-agp would be the ideal solution.
As a simple fix, I did a script which checks if both hardware are
present and then I mount / as rw, blacklisting intel-agp and then I
mount / as read-only again (fsck expects this). It must be ran quite
early - before the res
I suspect that the newer kernel is working properly and that your drive
is showing up as sda instead of hda (or the other way around).
You could try booting the new kernel with root=/dev/sdaX to test this
theory.
--
I can't use any kernel past the -19 version
https://launchpad.net/bugs/55112
--
I have the same installer crash on a amd athlon64 machine, wenn
installing ubuntu (drapper amd64) on a 47GB volume. It crashed at 22% at
"Copying files...". (I set up to mount /home, /usr and /var to other
partitions on a sata drive.)
--
Installer Crashed (maybe not a ubiquity bug?)
https://launc
I just upgraded usplash to 0.4-11 and now edgy boots like it did but
usplash is still dark and centered on a black background.
--
After usplash edgy update, sytem doesnt boot
https://launchpad.net/bugs/55274
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailm
--
Installer Crashed (maybe not a ubiquity bug?)
https://launchpad.net/bugs/49180
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Well, then I'll have to re-open the bug (if it's been closed) when I can
get onto the website.
--
Unplugging Audigy 2 ZS Notebook (PCMCIA) still causing system crash on Ubuntu
Edgy
https://launchpad.net/bugs/40737
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.co
--
Installer Crashed (maybe not a ubiquity bug?)
https://launchpad.net/bugs/49180
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Added printk_ratelimit() around the dev_err
** Changed in: linux-source-2.6.15 (Ubuntu)
Status: Unconfirmed => Fix Committed
--
Error floods virtual consoles making them unusable
https://launchpad.net/bugs/55253
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubun
Hi Ben
> Did this work prior to breezy using linux?
Yes, we started using this solution in Debian Woody days and as far as I
remember it was still working with Ubuntu Hoary although I wasn't
involved for some time after that. However, I can confirm that it ran as
a stable solution for many yea
The commits are identified by the SHA hash. I applied both the fixes
mentioned in that changelog. Thanks.
** Changed in: linux-source-2.6.15 (Ubuntu)
Importance: Untriaged => Medium
Assignee: (unassigned) => Ben Collins
Status: Unconfirmed => Fix Committed
--
gamecon causes segmen
I have exactly the same Problem (from time to time) on a (old) Desktop-
Machine here.
I have the 'nvidia'-driver installed. Could this be a problem ?
Last time I tried some apps with strace like above, looked around in the
dir-tree and made some comments in a text file. (konsole and kate, which
I
metacity (1:2.15.21-0ubuntu1) edgy; urgency=low
.
* New upstream release:
- kill usage of libegg
- fix another C89 vs. C99 issue
- make it so maximized windows do not have rounded corners
- fix the heuristic for determining if windows can be made fullscreen,
needed f
I can confirm this with the same two white cursor blocks.
Video chipset : Intel Corporation Mobile 915GM/GMS/910GML Express
Graphics Controller (rev 03); PCI-ID 8086:2792
I think that it does it at xserver-xorg configuration time.
** Changed in: Ubuntu
Status: Unconfirmed => Confirmed
--
Public bug reported:
When using Ubuntu 6.06 LTS with all the latest updates added on a Compaq
Armada M700 notebook with an Edimax EW-7108PCg PCMCIA card inserted,
Ubuntu crashes completely when trying to configure the wireless network
card using "Network Settings". The cursor simply stops respondi
Thanks for your bug report Karianne and sorry for having taken sooo long
to answer. Is it allright now ? Are you using Dapper (6.06) ?
--
Installer doesn't work with framebuffer on (breezy, col 3)
https://launchpad.net/bugs/20185
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:/
What is your graphic card ?
** Changed in: Ubuntu
Status: Unconfirmed => Needs Info
--
cannot boot Dapper: black screen
https://launchpad.net/bugs/40448
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Ben, even if I disable the addon video chip (the boards I'm working on
this have all this setting and none of them works), the issue raises.
And the device is still present on the system. Broken bios, I know. As
there are some of those boards around, a fix is still needed.
One extra issue is that
gnome-utils (2.15.92-0ubuntu1) edgy; urgency=low
.
* New upstream release:
- Baobab:
- Fixed crash when opening a non-existent folder.
- Screenshot:
- gnome-screenshot fails to take a shot on a single window.
(Malone: #55675)
- Translations Updates By: gu,
*** This bug is a duplicate of bug 41106 ***
** This bug has been marked a duplicate of bug 41106
Black screen during install after configuring of xserver (on certain intel
graphics cards)
--
Ubuntu 20060807.1 i386 Alternate CD install blacks screen
https://launchpad.net/bugs/55687
--
ubun
Please attach yaboot.conf.
--
Powerbook G4 kernel panic
https://launchpad.net/bugs/55454
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Please boot using a rescue mode (one that does not quiten then kernel
output). See if you can capture any messages to the screen with a
digital camera.
** Changed in: linux-source-2.6.15 (Ubuntu)
Status: Unconfirmed => Needs Info
--
Freeze live CD in dell dimension 2400
https://launchpad
Nobody know how to solve this?
--
Monodevelop not starting after install
https://launchpad.net/bugs/55344
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
>I have the 'nvidia'-driver installed. Could this be a problem ?
I doubt it. My laptop has an Intel 855GM integrated graphics card - no
nvidia driver here.
Thank You for your other info though... I hope it helps. :-)
--
Can't start programs after resume from suspend/hibernate
https://launchpad.
> [EMAIL PROTECTED]:~$ /etc/init.d/bluez-utils start
> * Starting Bluetooth services... hcid sdpd
> [ ok ]
>
> Still can't find bluetooth
>
> [EMAIL PROTECTED]:~$ hid2hci
> No devices in HCI mode found
> ... didn't help.
Please ru
*** This bug is a duplicate of bug 41106 ***
** This bug has been marked a duplicate of bug 41106
Black screen during install after configuring of xserver (on certain intel
graphics cards)
--
text mode installer: screen goes almost blank
https://launchpad.net/bugs/48488
--
ubuntu-bugs mail
*** This bug is a duplicate of bug 41106 ***
** This bug has been marked a duplicate of bug 41106
Black screen during install after configuring of xserver (on certain intel
graphics cards)
--
installation with black-screen
https://launchpad.net/bugs/46968
--
ubuntu-bugs mailing list
ubuntu
*** This bug is a duplicate of bug 41106 ***
** This bug has been marked a duplicate of bug 41106
Black screen during install after configuring of xserver (on certain intel
graphics cards)
--
Black screen during install after configuring of xserver (on certain intel
graphics cards, e.g. 855
Found 6 duplicates with multiple confirmations.
** Summary changed:
- Screen goes black in instalation (Text-mode install CD) Samsung X05 - i810
graphic
+ Black screen during install after configuring of xserver (on certain intel
graphics cards)
** Bug 46592 has been marked a duplicate of this
*** This bug is a duplicate of bug 41106 ***
** This bug has been marked a duplicate of bug 41106
Black screen during install after configuring of xserver (on certain intel
graphics cards)
--
Blackscreen after 70% installation process
https://launchpad.net/bugs/44080
--
ubuntu-bugs mailing
Public bug reported:
we have a server that has (Dapper server LTS ) Kernel 2.6.15-26-server. We
have been geting some errors in dmesg and the memory (RAM) has not been
allocated correctly . It has 1 Gig or ram and no strees I see Memory been
dumped in cache like 931 going n cache and 131 free
Try booting with acpi=off on the kernel command line.
** Changed in: linux-source-2.6.15 (Ubuntu)
Status: Unconfirmed => Needs Info
--
Kernel panics at boot with live CD
https://launchpad.net/bugs/55527
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/ma
** Changed in: linux-source-2.6.15 (Ubuntu)
Assignee: (unassigned) => Ben Collins
Status: Unconfirmed => Fix Committed
--
Problem with HP Virtual Keyboard on DL320 on Dapper
https://launchpad.net/bugs/55495
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubunt
I can confirm this too.
Running Ubuntu Dapper:
Linux ubuntu 2.6.15-26-686 #1 SMP PREEMPT Thu Aug 3 03:13:28 UTC 2006 i686
GNU/Linux
And EasyTag: 1.99.11
Almost as soon as a search for information from the ``CD Data Base
Search'' tool is activated the program hangs, but not every time and it
see
Glad to hear it's fixed for you. Thanks for following up.
** Changed in: epiphany-browser (Ubuntu)
Status: Needs Info => Fix Released
--
Epiphany window closes very slowly.
https://launchpad.net/bugs/41892
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com
Thanks Chrierton, I followed up on the upstream bug.
** Bug watch added: GNOME Bug Tracker #321840
http://bugzilla.gnome.org/show_bug.cgi?id=321840
** Also affects: gthumb (upstream) via
http://bugzilla.gnome.org/show_bug.cgi?id=321840
Importance: Unknown
Status: Unknown
--
In s
I did another attempt on my computer since the thing seemed fixed on
greghall 's one
alas 2.6.15-26 (3 Aug version) does not fix for me, still no poweroff
--
Power down after shutdown does not work...
https://launchpad.net/bugs/43961
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
htt
** Changed in: Ubuntu
Assignee: (unassigned) => Ubuntu Kernel Team
--
Kernal 2.6.16 Server Memory Leaks and Disk I/O errors
https://launchpad.net/bugs/55692
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Thanks for your bug report. On Edgy, I could tick off the last column,
and it was still to be seen in the list window. It's a very minor bug,
but confirmed.
If anybody wants to forward this to upstream, pleases do.
** Changed in: nautilus (Ubuntu)
Importance: Untriaged => Low
Assignee: (u
Thanks for your bug report. Which version of Ubuntu do you use? Can you
try to explain which problem you face?
** Changed in: ekiga (Ubuntu)
Importance: Untriaged => Low
Assignee: (unassigned) => Ubuntu Desktop Bugs
Status: Rejected => Needs Info
--
local user can call itself
ht
This time the computer didn't actually power off, but came back to X
after about 10 seconds of HD activity. Attaching dmesg. I have no idea
why the behaviour was different this time. I'll try again immediately
after a reboot.
--
Thinkpad R51 won't hibernate
https://launchpad.net/bugs/54382
--
u
Thanks for your bug report. I was just able to rotate a .tiff file. Can
you attach a file which shows the problem? Which version of Ubuntu and
gthumb do you use?
** Changed in: gthumb (Ubuntu)
Importance: Untriaged => Low
Assignee: (unassigned) => Ubuntu Desktop Bugs
Status: Unconfi
i can confirm the solution mentioned in comment "From: Matthew Wang at
2006-08-05 14:55:35 CEST".
here is a `diff -Nru`patch:
--
gnome-session fails when "alias ls='ls --color'" in .profile
https://launchpad.net/bugs/48876
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists
There is no ubuntu specific change, just that Ubuntu got the package
first. It is safe to just sync with the Debian one, unless it is
important to have the change log from Ubuntu.
--
Sync request from debian for 0.2-2
https://launchpad.net/bugs/53918
--
ubuntu-bugs mailing list
ubuntu-bugs@list
Seems to be that my Thinkpad doesn't want to power down when hibernating
on Tuesdays, or something. Here's another dmesg, after a reboot. There
is some difference in the output (that is, in addition to the keyboard
messages in the earlier listing), but I'm not sure if there are any
error indicators
The merry go round continues. Closing this bug, as I reopening recent
bugs that Seveas rejected, not old ones.
** Changed in: Ubuntu
Status: Needs Info => Rejected
--
It is unable to open the website address and FTP address in the email
attachment.
https://launchpad.net/bugs/24945
--
u
Public bug reported:
I have a problem when printing PostScript files created with GMT
(Generic Mapping Tools) using Ubuntu Dapper. I create a PostScript file
with the following command:
/usr/lib/gmt/bin/psxy --PAPER_MEDIA=letter -R1/7.5/1/10 -JX6.5i/9i
-Ba1f0.25WSne -P /dev/null > test.ps
The r
test.ps file attached
--
Problem printing GMT PostScript
https://launchpad.net/bugs/55694
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Same goes for me. I have a Asus A8N-E motherboard and run the 32 bit
Kubuntu. Installed Dapper from scratch.
--
hal-device-manager does not load
https://launchpad.net/bugs/31517
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
system-generated bug report attached.
Machine Acer Ferrari 4005, AMD 64, today's Edgy.
** Affects: Ubuntu
Importance: Untriaged
Status: Unconfirmed
--
network-admin crashes when try to open in Gnome menu
https://launchpad.net/bugs/55696
--
ubuntu-bugs maili
Sorry. here is bug report.
--
network-admin crashes when try to open in Gnome menu
https://launchpad.net/bugs/55696
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
Binary package hint: mutt
There is some issue with the default settings in the /etc/Muttrc file
that replaces "Re:" with some special characters. With the default
locale set it shows up as "ââ>". When I added the following lines to my
.bashrc:
LOCALE=en_US.utf8 && export LOC
Public bug reported:
I get a reproducible BUG when inserting this device into one of my T42's
slots. Will attach dmesg, including stack trace, shortly
** Affects: linux-source-2.6.17 (Ubuntu)
Importance: Untriaged
Status: Unconfirmed
--
BUG when inserting PCMCIA flash adapter
htt
--
BUG when inserting PCMCIA flash adapter
https://launchpad.net/bugs/55695
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I've reinstalled with root partition formatted in ext3 filesystem (other
partitions continue being xfs) and it fix the problem, so the kernel
panic and the access to hda1 were induced by the root partition as xfs.
yaboot.conf wasn't changed from installation, I only added bfboot=hd:
cause yaboot g
Attaching a debdiff please check it thoroughly before applying - I'm
not really good at this.
** Changed in: snappea (Ubuntu)
Assignee: (unassigned) => MOTU Reviewers Team
--
No .desktop
https://launchpad.net/bugs/49665
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://
hm. got something from dbus when I did a sudo /etc/init.d/dbus restart
--
hal-device-manager does not load
https://launchpad.net/bugs/31517
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Added in Debian.
** Changed in: flashplugin-nonfree (Ubuntu)
Assignee: Bart Martens => (unassigned)
--
update-flashplugin should check for permission at start
https://launchpad.net/bugs/53263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinf
** Bug watch added: GNOME Bug Tracker #350471
http://bugzilla.gnome.org/show_bug.cgi?id=350471
** Also affects: nautilus (upstream) via
http://bugzilla.gnome.org/show_bug.cgi?id=350471
Importance: Unknown
Status: Unknown
--
Display the information whether no column is ticked off
Public bug reported:
[EMAIL PROTECTED]:~/tmp$ sudo apt-get build-dep scigraphica
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Build-Depends dependency for scigraphica cannot be satisfied because no
available versions of package python2.4-numer
Public bug reported:
irc.debian.org is listed as a hostname for freenode but it now points at
OFTC
** Affects: kdenetwork (Ubuntu)
Importance: Untriaged
Status: Unconfirmed
--
kopete includes irc.debian.org as a freenode server
https://launchpad.net/bugs/55699
--
ubuntu-bugs mai
Hi darx,
Does this bug still exist when using the latest Dapper?
--
acer 1652WLMi
https://launchpad.net/bugs/37279
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I just discovered that linuxsampler has some licensing issues. They
claim it is GPL, but then add additional restrictions to it. Debian
Proper has already removed linuxsampler, liblscp, libgig and qsampler
from their archives. What's the Ubuntu policy on that?
See http://bugs.debian.org/cgi-bin/bu
Present version in Dapper is installable, and a newer version is
available in Edgy. Closing.
** Changed in: tex4ht (Ubuntu)
Status: In Progress => Fix Released
--
Can not be installed
https://launchpad.net/bugs/27201
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists
> It was originally done for a Debian 2.6.8 kernel, based on a patch for
> the 2.4 series from Owen Stampflee [http://www.stampflee.com/kernel]
> (see also Debian Bug report #298075) simply by identifying the bits with
> correspoding functionality and following what had to be added to add the
> sa
Public bug reported:
Binary package hint: linux-image-2.6-686
After installing the linux-image-686 (or linux-image-686-smp) package on
a base 6.06 installation the packages sun-java5-bin, sun-java5-jre and
sun-java5-plugin cannot be installed via apt-get. I'm guessing that this
will be the same f
*** This bug is a duplicate of bug 55660 ***
** This bug has been marked a duplicate of bug 55660
Sync request for xosd.
--
sync xosd 2.2.14-1.3 from sid (overriding changes OK)
https://launchpad.net/bugs/55678
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.co
ACKed (I actually worked on it without checking for bugs, and came to
the same conclusion)
** Bug 55678 has been marked a duplicate of this bug
--
Sync request for xosd.
https://launchpad.net/bugs/55660
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/l
new version uploaded to edgy, will test and re-file request
** Changed in: kbfx (Ubuntu)
Status: Confirmed => Rejected
--
[ backport ] kbfx 0.4.9.1+0.4.9.2rc1 from edgy to dapper-backports
https://launchpad.net/bugs/52343
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://
Fix released in edgy ( new upstream version )
** Changed in: kbfx (Ubuntu)
Assignee: (unassigned) => Brandon Holtsclaw
Status: Unconfirmed => Fix Released
--
KMenu not working in kbfx
https://launchpad.net/bugs/41974
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://
Fix Released in Edgy ( new upstream version ) and backport request filed
** Changed in: kbfx (Ubuntu)
Assignee: (unassigned) => Brandon Holtsclaw
Status: Confirmed => Fix Released
--
directory in root dir
https://launchpad.net/bugs/39916
--
ubuntu-bugs mailing list
ubuntu-bugs@list
new version uploaded to edgy, will test and re-file request
** Changed in: kbfx (Ubuntu Dapper)
Status: Confirmed => Rejected
--
[ backport ] kbfx 0.4.9.1+0.4.9.2rc1 from edgy to dapper-backports
https://launchpad.net/bugs/52343
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
h
> Can you create a new cramfs (on the ubuntu system) and see if that works
> on Ubuntu, and then also test it on RH?
Looks like there must be some incompatibility between the Ubuntu
and RH cramfs. I created a new cramfs image on Ubuntu. Mounting
it works fine on Ubuntu. But mounting the same im
I don't expect that we'll do a point release for Breezy, given that
Dapper is out (and with its own first point release on the way). Any
reason to keep this open?
--
Administrator root password readable in cleartext on Breezy
https://launchpad.net/bugs/34606
--
ubuntu-bugs mailing list
ubuntu-
Dynamic generation of PPD files with foomatic-ppdfile is already possible in
Edgy, which has foomatic-db-engine 3.0.2-20060712-1.
I have tested this feature with CUPS web interface but the performance is
really low, it takes several minutes before the list with manufacturers appears
and again se
** Changed in: ndiswrapper (Ubuntu)
Importance: Critical => High
--
Ndiswrapper no longer works with Netgear MA111 in Dapper Flight CD 4 (worked in
Breezy)
https://launchpad.net/bugs/32275
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubu
Public bug reported:
E: The package jedit needs to be reinstalled, but I can't find an archive for
it.
E: Internal error opening cache (1). Please report.
now i can not add/remove programs and i can not update.
** Affects: Ubuntu
Importance: Untriaged
Status: Unconfirmed
--
i t
** Changed in: xserver-xorg-driver-ati (Ubuntu)
Importance: Critical => High
Assignee: Ubuntu X SWAT => (unassigned)
--
X fails to start in dapper flight3 & 4 with ati X600, onward all the way
through dapper 6.06 LTS
https://launchpad.net/bugs/28925
--
ubuntu-bugs mailing list
ubuntu-b
Closing this, as 2.3.99.5 is now in Edgy.
** Changed in: abcde (Ubuntu)
Status: Unconfirmed => Fix Released
--
man page describes feature not yet implemented
https://launchpad.net/bugs/38189
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listin
** Changed in: linux-source-2.6.15 (Ubuntu)
Importance: Critical => High
--
Ralink Wireless USB/PCMCIA/PCI hangs PC
https://launchpad.net/bugs/34902
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
> Oh, maybe it's related to the fact that my Ubuntu system is
> x86, while my RHEL4 and SLES10 systems are ia64? Are cramfs
> images architecture-dependent?
Based on fs/cramfs/README, it doesn't look like cramfs images
are very portable, so I'm probably just rediscovering a known
problem. x86 an
I've done this on a number of occasions already, without anything
showing up. Hardware can never be ruled out, but I don't think it's a
memory issue. I have no idea how the rest of the MB can be tested.
I think it's odd that I had nearly two months of very stable Dapper
before oopses started aga
Attaching a debdiff. I'm new to this, so check twice before applying.
Thanks.
** Changed in: magnus (Ubuntu)
Assignee: (unassigned) => MOTU Reviewers Team
--
No .desktop file
https://launchpad.net/bugs/49761
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com
301 - 400 of 617 matches
Mail list logo
