Public bug reported:
18.04 LTS server install with GUI
Nvidia, Cuda, Tensorrt
HP omen 15
touchpad works normally but usb mouse (Logitech) not
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: libinput10 1.10.4-1ubuntu0.18.04.2
ProcVersionSignature: Ubuntu 4.15.0-128.131-generic 4.15.18
Una
I've experienced this on a ThinkPad with single display (the inbuilt
one) only, and a Dell desktop with two displays.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1872159
Title:
Boot animation neve
Same bug in 19.04 Gnome Compiz flashback. I'm pretty damn fed up with it
by now.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1558537
Title:
Windows being ejected into wrong workspaces
To manage n
Public bug reported:
Systemd in Bionic fails to handle MountFlags correctly. Would you mind
to include
https://github.com/systemd/systemd/commit/37ed15d7edaf59a1fc7c9e3552cd93a83f3814ef
into Bionic? This bug seriously affects Docker > 18.6, see the Docker
release notes for 18.09.1 (https://docs.do
I think that this problem should still be fixed. Having a zombie instead
of a syslog entry is not very nice. "systemctl status certmonger" did
not indicate any problem, even though the certificates were not updated
(if I got this correctly).
--
You received this bug notification because you are a
PS: It seems that this was broken by a previous certmonger/ipaclient
installation. If I setup a new host using certmonger 0.78.6-4 and
freeipa 4.4.4-1+b1, then there are no zombies.
I think thats fine.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
I am affected by this problem, too (using certmonger 0.78.6-4 and
freeipa 4.4.4-1+b1 on Stretch). The paths are different, though: getcert
lists helper paths in /usr/lib/x86_64-linux-gnu/certmonger, but they can
be found in /usr/lib/certmonger.
What would you suggest to fix this problem for >120 h
Warning about
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1510731/comments/22
If you select first quided partitioning, it will overwrite your existing
partition table no mattter if you press back!
So that workaround works only if you have noting to keep in existing
disk!
--
You rec
Public bug reported:
Ylimääräisten tiedostojen lataus epäonnistui
Seuraavat pakettien asennus vaatii tiedostojen ylimääräistä lataamista,
mutta tiedostoja ei voitu ladata tai käsitellä.
ttf-mscorefonts-installer
Latausta yritetään myöhemmin uudelleen, tai voit yrittää latausta nyt.
Tämän komenn
Same bug in Ubuntu 16.04.1
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1558537
Title:
Windows being ejected into wrong workspaces
To manage notifications about this bug go to:
https://bugs.launch
Maybe you would like to try version 1.4.1-1, available on Debian? I have
no idea why it hasn't been copied to Ubuntu yet.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1639414
Title:
network-manager
n-m-s has been updated in Debian. Please note that version 1.4 needs
some patches in strongswan 5.5 as well.
Hope this helps
Harri
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1578193
Title
installed)
ProcVersionSignature: Ubuntu 4.4.0-34.53-generic 4.4.15
Uname: Linux 4.4.0-34-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: harri 36696 F pulseaudio
Date: Tue Sep 20 14:03:23 2016
ErrorMessage: subproce
Implement the CalDAV support, thanks.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1199774
Title:
No calDAV and iCalendar support
To manage notifications about this bug go to:
https://bugs.launchp
** Description changed:
Compiz 1:0.9.11.3+14.04.20150313-0ubuntu1
Ubuntu 14.04.4 LTS, Gnome session flashback
Lenovo ThinkPad W520
+ NVIDIA GF106GLM [Quadro 2000M] binary driver - version 352.63 from nvidia-352
(proprietary, tested) (because default open source driver caused unusably slow
Sometimes when Ubuntu comes out of screen saver, it stretches one
workspace and its windows double wide, which makes no sense in any
situation. The windows get thrown around when I press Fn+F7 to return to
normal state.
** Attachment added: "Double wide workspace and window"
https://bugs.launc
Public bug reported:
Compiz 1:0.9.11.3+14.04.20150313-0ubuntu1
Ubuntu 14.04.4 LTS, Gnome session flashback
Lenovo ThinkPad W520
Problem: Windows being ejected into wrong workspaces. Cleanup after the
disruption takes about 1.5 minutes and is a tedious clicking chore.
Situation 1: When I switch f
** Description changed:
Error:
- Kernel foolishly shuts down the computer when it overheats.
+ Kernel foolishly shuts down the computer when it overheats because of the
underlying bug "Overheat due to slow fans when on 'auto'"
+ ( https://bugs.launchpad.net/ubuntu/+source/linux/+bug/751689 ).
Speaking to Lenovo won't automatically fix the issue, because it is way
harder to get people to install bios updates than to accept kernel
updates.
Fan control disengaged mode works: fan runs 4700 RPM, which keeps
temperature down at 84 C after several minutes at full load.
Unfortunately in diseng
It doesn't matter whether this machine has the common old-age ailment of
dried thermal grease or not. It's part of normal ageing, so Linux needs
to be able to handle it in a non-destructive way.
Now Linux is being bullheadedly intolerant to common ailments. It's like
a doctor letting an old patien
I accepted it being a common hardware issue many messages up.
Which is easier; fixing the kernel to be non-destructive for these
machines, or physically overhauling all overheating laptops running
Linux?
The "opening windows in a house fire" -parable is inaccurate. What I'm
suggesting for the hou
The thermald throttling malfunctioning is interesting.
Yes, I believe my laptop is among the several % of portables having
cooling issues due to old age and/or on-the-edge design. Like I said,
it's a common ailment. Just google "ubuntu laptop overheating" to find
out how common. What are we suppos
Responses to the points above I disagree with:
* fan not running at full speed in disengaged mode in a thermal emergency
"... so it never exceeds a top speed of 3500 RPM. This matches the original
thermal design by the manufacturer."
-When reality acutely requires full speed, it is madness to refe
Attachment from "sudo thermald --no-daemon --dbus-enable
--loglevel=debug | tee thermald.log".
** Attachment added: "A few minutes full load over 30% base load"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1491797/+attachment/4457110/+files/thermald-lenovo-W500-2015.09.04.log
--
You
I can't see how that information could be helpful in fixing the problem. It
doesn't matter whether there's a common hardware ailment involved in this
particular overheating or not. The software is acting like an idiot and wasting
all its chances to remedy the situation:
-fan not running at full
Attachment from "powerstat -za 1 480".
** Attachment added: "Intermittent full load over 30% base load"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1491797/+attachment/4456951/+files/powerstat-lenovo-W500-2015.09.03.txt
--
You received this bug notification because you are a member
If thermald is supposed to throttle CPU according to temperature, it
doesn't work.
Whatever is throttling the CPU seems to be unaware of temperature,
because the more I load the machine, the more reliably "cpufreq-info -w"
returns "2801000" while temperature is at 90-95 C.
Only when there is less
I might renew the cooler paste some day.
Why isn't the fan being run in disengaged mode at 5100 RPM by the kernel
in a thermal emergency? Surely that would be easier to do than to have
every Lenovo W500's cooler pastes renewed?
--
You received this bug notification because you are a member of Ub
running
"powerstat -Da 1 60"
returns
"Device does not have any RAPL domains, cannot power measure power usage."
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1491797
Title:
Shuts down when supposed
The hardware was disassembled and everything was fine. Fan kept speed well
after blowing into it.
I drilled extra holes to the case bottom to aid air flow.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bug
Installed kernel Linux 4.2.0-040200-generic .
Ensured it was running.
Problem remains the same: overheating with fan speed staying low (up to 3600
out of 5000rpm) after several minutes at 90-96C.
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
** Tags added: kernel-bug-exi
** Description changed:
- Error:
+ Error:
Kernel foolishly shuts down the computer when it overheats.
/var/log/kern.log
W500 kernel: [1448.648529] thermal thermal_zone1: critical temperature
reached (100 C), shutting down
Consequence:
Shutting down destroys session in Ubuntu, Gnome,
As recommended on irc/Freenode/#ubuntu-kernel ;
-installed linux-generic-lts-vivid
-ensured that new kernel is running
-ensured that thermald is running
The problem remains the same: overheating with fan speed staying low (3500 out
of 5000rpm) after several minutes at 95C.
--
You received this
Public bug reported:
Error:
Kernel foolishly shuts down the computer when it overheats.
/var/log/kern.log
W500 kernel: [1448.648529] thermal thermal_zone1: critical temperature reached
(100 C), shutting down
Consequence:
Shutting down destroys session in Ubuntu, Gnome, and all applications that
** Package changed: ubuntu => libgphoto2 (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1464676
Title:
USB connection to Lumia phones does not work in Ubuntu 14.10 and 15.04
To manage notif
Public bug reported:
I'm having problems connecting my Lumia 930 phone (Windows phone 8.1) to
Ubuntu Gnome 14.10. When plugging the USB cable, the device shows up on
the desktop (there is a camera icon with the name of the phone), so it
is to be detected correctly. Another user reported the same p
There is also information in the question I filed about this:
https://answers.launchpad.net/ubuntu/+question/267987
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1464676
Title:
USB connection to Lu
twinkle.desktop
[Desktop Entry]
Type=Application
Exec=/usr/bin/twinkle
Hidden=true
NoDisplay=true
X-GNOME-Autostart-enabled=true
X-GNOME-Autostart-Delay=40
Name[fi_FI]=Twinkle
Name=Twinkle
Comment[fi_FI]=zzz
Comment=zzz
--
You received this bug notification because you are a member of Ubuntu
Bu
This is fatal bug, as twinkle with autostart only starts it however it
deregister account immediately with text "Info: Deregistering phone..."
and stay hanged. On terminal it starts ok.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
h
Public bug reported:
All seems to work in Ubuntu and no issues after installation, but before
rebooting. Anyhow this nvidia-331 update did not work. There were no
other issues during installation (other Ubuntu modules/sw).
ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: nvidia-331-updat
After upgrade from 12.04 LTS to 14.04 LTS got this error message with
three fonts "/etc/fonts/conf.d/65-khmer.conf"
# uname -a
Linux harri-Veriton-X2610G 3.13.0-37-generic #64-Ubuntu SMP Mon Sep 22 21:28:38
UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
Starting firefox from shell did show
Fixed for me too. Thanks :)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1315726
Title:
Chromium 34 Flash Fullscreen in dedicated window
To manage notifications about this bug go to:
https://bugs.
Same problem here, I'm running Linux mint 17, chromium-browser
34.0.1847.116-ubuntu2 with pepflashplugin-installer
(14.0.0.125~cr35.0.1916.153-1-0skunk0)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/
Public bug reported:
After closing laptop lid (Asus Zenbook UX31A), letting computer go to
sleep and opening the lid again, the backlight is always off. After
adjusting the backlight with Fn+F3/F4 I can see that it does remember
the old setting. For example if I put the backlight to max-1, close
to clean up
my computer
You can close the ticket.
-Harri
On 14.04.2014 02:39, Christopher M. Penalver wrote:
> Harri-vainola, could you please provide the full computer model as noted
> on the sticker?
>
>
> ** Tags added: needs-full-computer-model
>
> run p
--
has so much information.
-Harri
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1304618
Title:
[SAMSUNG ELECTRONICS CO., LTD. 900X3C/900X3D/900X3E/900X4C/900X4D]
suspend/resume failure
To
My main problem is that WiFi is pumping on/off.
I don't know is it weake signal, hardware or software problem.
I suppose it is weake signal and software problem.
In earlier ubuntu versions it works better.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is sub
.13.0-23-generic x86_64
Annotation: This occured during a previous suspend and prevented it from
resuming properly.
ApportVersion: 2.14.1-0ubuntu1
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: harri 1867 F pulseaudio
Date: Tue Apr 8 22:03:22
Just to doubly sure I copied the symlink targets in place of the symlinks on
the usb stick, after which the integrity check passed ok.
It does not affect the installation though, still fails as described in the
original report.
--
You received this bug notification because you are a member of U
I just ran into this same problem, trying to install 13.04 amd64 server
to raid10 root with 4 disks from a usb stick created with usb-creator-
kde on kubuntu 13.04 desktop.
Verification of the "CD-ROM disc" from the menu fails for the usb stick,
but this seems to be bogus.
Failed files are
md5su
Yesterday in installed to my 12.04.1 uvcdynctrl and day after my root
filesystem was full due /var/log/uvcdynctrl-udev.log (63G), so it seems
that this bug impacts for many users. Is there any (other) workaround
than put cron to clean that file ?
--
You received this bug notification because you
Public bug reported:
http://sdcc.sourceforge.net/ says:
July 9th, 2012: Small Device C Compiler 3.2.0 released.
That's quite a while ago. It would be nice to get the newest version in
(bugfixes, improvements, not falling behind).
There seems to be a request open on Debian side as well.
http:/
I tried the deb on Quantal as well and get the "Not using GLX TFP"
-problem that nvidia won't fix. So unless gnome-shell gets fixed
someday, that box will run in gnome fallback mode with bluetile. Might
as well have stuck with VESA. I think gdm even ran a bit faster with it
:)
Good confirmation to
*** This bug is a duplicate of bug 1064192 ***
https://bugs.launchpad.net/bugs/1064192
Also confirmed here and waiting on this. X isn't completely unusable,
though. At least for me VESA still works. That does mean running the
desktop in less demanding mode, though.
New 173 driver has been out
Public bug reported:
$ sudo apt-get install nvidia-173
[sudo] password for internetuser:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you ar
This bug was still present in 3.6.2rc1 but got fixed (the attached
document can be opened) in 3.6.2rc2. Additionally the attached document
has similar timestamp differences as described in bug #49819 which got
fixed between those builds. Thus marking as duplicate.
*** This bug has been marked as a
This happened twice when trying to install a VM using VirtualBox (Debian
Squeeze 64-bit & Win7 Pro 64-bit).
The host OS totally froze, no response whatsoever.
I am very sorry, but I do not have the time for further testing at the
moment.
Kind regards,
Harri Saastamoinen
Orig
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/975047
Title:
BUG: unable to handle kernel paging request at 00ff7ff9
To manage notifications about this bug go to:
https://bugs.launchpad.net/u
Architecture Driver Version 1.0.24.
Annotation: Your system might become unstable now and might need to be
restarted.
ApportVersion: 2.0-0ubuntu4
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: harri 2351 F pulseaudio
Date: Fri Apr 6 14:24:08 2012
Failure
I am not sure, but AFAICS the fix in openvpn doesn't help, since
network-manager-openvpn ignores the script /etc/openvpn/update-resolv-
conf in favor of its own helper to receive the domain names.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed t
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/898281
Title:
package chillispot 1.0-10 failed to install/upgrade: subproses
installed post-installation script menghasilkan kesalahan status
'exit':
Public bug reported:
I am having problems in the process of installing Chillispot, there is a
failure in the installation process.
ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: chillispot 1.0-10
ProcVersionSignature: Ubuntu 2.6.32-35.78-generic 2.6.32.46+drm33.20
Uname: Linux 2.6.32-3
After upgrading to 11.10, I get this too.
After idling for a while, my monitors go into power-off state, and
nothing seems to wake them up, not mouse movements, not keyboard
activity, not anything. Ctrl-alt-F1 does not work, and hitting caps lock
does not make the keyboard LED blink.
--
You rece
** Attachment added: "Ubuntu1110.png"
https://bugs.launchpad.net/bugs/862479/+attachment/2481214/+files/Ubuntu1110.png
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/862479
Title:
11.10 beta2 upg
Public bug reported:
The installation of 11.10 beta2 downloads files, until a popup is messaging that
"W:Tiedoston
bzip2:/var/lib/apt/lists/partial/fi.archive.ubuntu.com_ubuntu_dists_oneiric_universe_source_Sources
nouto ei onnistunut Hash Sum täsmää
, W:Tiedoston bzip2:/var/lib/apt/lists/part
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/732808
Title:
package zoneminder 1.24.2-1 failed to install/upgrade: aliprosessi
installed post-installation script palautti virhetilakoodin 255
--
u
Public bug reported:
Binary package hint: zoneminder
1) Ubuntu 10.04 LTS
2) zoneminder 1.24.2-1
3) expected succesful install
4) failed to install
Sorry, this my level of understanding of linux :)
Harri
ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: zoneminder 1.24.2-1
Release 10.10 seems to fix this bug. Hooray.
--
Mouse behaves strange on clicking in graphical environment
https://bugs.launchpad.net/bugs/444674
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@li
Metoo. I tried 10.04 today. Using network-manager-openvpn-gnome in the
Gnome environment it works like a charm.
Looking at how long this bug report is open (>3 years!) it seems to me
that KDE and OpenVPN are low priority. I can surely live without KDE,
but OpenVPN support is a must-have to connect
Public bug reported:
Binary package hint: plasma-widget-networkmanagement
network-manager-openvpn-kde:
After creating a OpenVPN connection I was asked to enter the password
for kwallet. After that nothing else happened. I rebooted and tried to
activate the OpenVPN connection. I was asked to ente
ce --stats --safe-links
rsync://rsync.cdimage.ubuntu.com/cdimage/releases/
/pub/mirrors/cdimage.ubuntu.com/releases/
Harri
--
mirrors should update package files in the correct sequence
https://bugs.launchpad.net/bugs/149524
You received this bug notification because you are a member of Ubuntu
B
Lucid is out now, and the bug is still there, unchanged.
--
Mouse behaves strange on clicking in graphical environment
https://bugs.launchpad.net/bugs/444674
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ub
confirmed, problem went away with a new upgrade
--
no GUI after upgrade from lucid beta to current
https://bugs.launchpad.net/bugs/542546
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubun
** Attachment added: ".xsession-errors"
http://launchpadlibrarian.net/41393493/.xsession-errors
--
no GUI after upgrade from lucid beta to current
https://bugs.launchpad.net/bugs/542546
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
I have installed 10.04 beta from DVD, activated nvidia-current, and
rebooted. I logged in, set a black background image, and did a system
upgrade. There was a dependency problem with update-notifier-common, so
it was just a partial upgrade. On the next reboot I could login, bu
I have installed libgl1-mesa-glx (to fulfill some package dependencies)
and nvidia-current in parallel. If I run "ldd some_opengl_program", then
it appears that it uses /usr/lib/libGL.so instead of /usr/lib/nvidia-
current/libGL.so.
--
OpenGL doesn't work with nvidia-current 190.53
https://bugs.l
Can you mouse people check if psmouse driver is the root cause for this
bug
** Package changed: xserver-xorg-input-evdev (Ubuntu) => xserver-xorg-
input-mouse (Ubuntu)
--
Mouse behaves strange on clicking in graphical environment
https://bugs.launchpad.net/bugs/444674
You received this bug notif
Timo's workaround seem to work for me too. Both stick and touchpad and
all buttons work now ok.
--
Mouse behaves strange on clicking in graphical environment
https://bugs.launchpad.net/bugs/444674
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to U
I doubt that it has been fixed, but I am not interested anymore.
Many thanx for the tremendous effort you have spent on this issue.
--
network-manager not asking for passphrase
https://bugs.launchpad.net/bugs/248694
You received this bug notification because you are a member of Ubuntu
Bugs, whic
I can concur this on Dell D600, both stick buttons and touchpad buttons
seem to miss ButtonPress and Button release event's on random starting
with 9.10 release. No such problems on 9.04 or any of the previous
releases.
This is also easy to replicate on 9.10 Desktop 32-bit installation Live-CD:
b
Public bug reported:
Binary package hint: gnome-panel
gnome-panel has a hardwired dependency upon libedataserverutil, which
implies the whole Evolution MUA. I cannot speak for others, of course,
but this kind of lock-in dependency is the main reason for me to _not_
use Gnome. I would like to choo
** Also affects: hundredpapercuts
Importance: Undecided
Status: New
--
network-manager-openvpn lacking support for pkcs12
https://bugs.launchpad.net/bugs/91615
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mai
** Attachment added: "kde4_calendar.png"
http://launchpadlibrarian.net/27164067/kde4_calendar.png
--
Wrong week number in a digital clock calendar
https://bugs.launchpad.net/bugs/380502
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Binary package hint: kdebase-workspace
Digital clock calendar has wrong week numbers in a week number column.
See the attachment for more information.
** Affects: kdebase-workspace (Ubuntu)
Importance: Undecided
Status: New
--
Wrong week number in a digital c
Public bug reported:
Binary package hint: ubuntu-minimal
IMHO ubuntu-minimal is not "sufficiently minimal" yet. It depends upon
way too many packages. Working on a system with high security
constraints it doesn't make sense to install locales, Python, ntpdate or
tasksel. Actually you just need a
@Milan "But note that it has always been *disabled* by default." - That
I don't understand.
Yesterday I updated my Dell Latitude to Jaunty (came orig. with 7.10)
and got the tracker error described above. I surely never intentionally
activated indexing - I just don't know what it does. But it is a
I would be interested in getting rid of the annoying popups, too.
Setting "-msglevel:all 0" is not an option, since it affects stderr as
well.
--
[mplayer] major annoyances with pop-up error messages
https://bugs.launchpad.net/bugs/198695
You received this bug notification because you are a memb
I can confirm this bug too...
[ 888.814299] nm-openvpn-serv[8765]: segfault at 0 ip 00402595 sp
7fff9b76fb90 error 4 in nm-openvpn-service[40+5000]
--
nm-openvpn-service crashed with SIGSEGV
https://bugs.launchpad.net/bugs/287875
You received this bug notification because you ar
My Laptop is running Debian now. Thanx anyway.
Regards
Harri
--
add usb speakers: Could not open audio device for playback
https://bugs.launchpad.net/bugs/293756
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Sorry, but the USB speakers are gone.
--
add usb speakers: Could not open audio device for playback
https://bugs.launchpad.net/bugs/293756
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubu
Testing further the problem seemed to be something in konsole settings.
I've been in the habit of hiding the menu bar, and there has been some
bug with respect to that as well. Now after few trials back and forth I
managed to make the menu bar stay hidden in new terminal, and the
KDEinit error di
I'm seeing this with konsole in KDE 4.2 on Kubuntu 8.10 amd64.
It doesn't matter if I start konsole from Alt-F2 or panel icon, the end result
is the same.
konsole starts up ok, but "Sorry - Plasma Workspace" modal message box comes up
as well.
.xsession-errors shows:
kdeinit4: preparing to lau
Yes, this is still an issue. I dont' have access to a more recent
Version of Ubuntu, though. I am bound to the LTS version.
Regards
Harri
--
network-manager not asking for passphrase
https://bugs.launchpad.net/bugs/248694
You received this bug notification because you are a member of U
Of course the script should not overwrite modifications done by the
user. If Debian doesn't allow to use a comment line tag like "# DO NOT
EDIT THIS FILE, or remove this line", then you could store the md5sum of
yp.conf somewhere to check for user modifications on the next run. If
the md5sum file d
gt; would doubtless lead to users having their configuration destroyed.
>
Sure. Looking for some line like
# DO NOT EDIT THIS FILE, or remove this line.
should work.
Regards
Harri
--
nis package must provide DHCP client scripts
https://bugs.launchpad.net/bugs/246322
You received this bug
s dhclient-script simply generates /etc/ypserv.conf. I could
provide a similar script for the dhclient hook directories, if you
are interested?
Regards
Harri
--
nis package must provide DHCP client scripts
https://bugs.launchpad.net/bugs/246322
You received this bug notification because you a
You mean you would accept dhcpd's nis options for new installs by
providing a client script, and provide a debconf note pointing to the
change on an upgrade? I could live with that.
I am not sure that this discussion is Ubuntu-only. In general I would
suggest to keep Debian and Ubuntu in sync, but
Usually root can always login to fix things on the console, unless you
explicitly disable root login, and rely upon an unprivileged user
running sudo, as Ubuntu does. So your "system non-functional" argument
is surely a home-made problem.
Maybe it would be possible to introduce some debconf menu t
PS: Hardware is a Dell XPS M1330, the fingerprint reader is a SGS
Thomson Microelectronics Fingerprint Reader.
--
thinkfinger-tools acquire fails on usb_bulk_read error
https://bugs.launchpad.net/bugs/214404
You received this bug notification because you are a member of Ubuntu
Bugs, which is subs
The fingertip solution does not work for me. But after killing hal
(/etc/init.d/hal stop) it seems to work better. A few times I got an
error "Undefined error occured (0x0b)", though.
This is 8.10.
--
thinkfinger-tools acquire fails on usb_bulk_read error
https://bugs.launchpad.net/bugs/214404
Y
1 - 100 of 137 matches
Mail list logo
