Umm... never mind my last comment about the left_handed mouse... I
logged out and back and input worked with left-handed set (but not
cursor_size)
$> cat .gconf/desktop/gnome/peripherals/mouse/%gconf.xml
The only other change I made was to synchronize my password (login) with my
ke
reboot and the same thing happened.
this time I removed 1 peripheral file at a time and the problem (for me)
is when you set the mouse to be left handed -- I don't recall changing
the cursor size. Removing this file fixed it so my input (from keyboard)
works. Here are the details:
~/.gconf/deskto
I have hit this bug before many times on previous versions of Ubuntu and
now on Lucid (10.04). Usually, I go to tty1 (CTRL+ALT+F1 works) and then
I kill compiz, which magically restores my keyboard and mouse input.
This time that didn't work so I left the window open and went to another
computer t
OMG posted an older version... sorry about this.
** Attachment added: "working lvm + raid preseed config"
http://launchpadlibrarian.net/52373584/ubuntu-lvm-raid.seed
** Also affects: mdadm
Importance: Undecided
Status: New
--
preseed Lucid with RAID and LVM fails to boot
https://bu
Attached is a working configuration for LVM + RAID partitioning.
Note that extended partitions must be used for the LVM physical device
(changing this to primary and using sd[ab]2 failed miserably). And also
note that you need to use LBA alignment either from a boot param
(preferred) or from the p
Please do fix this, as this affects Lucid (10.04) systems being
preseeded using LVM+RAID as noted on:
Bug #591909
--
Partition not end on cylinder boundary Lucid
https://bugs.launchpad.net/bugs/561573
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
It took me some time to realize that this was the solution for my RAID
preseed problem as well:
Bug #591909
--
partman-auto creates faulty partition table on netboot with preseed
https://bugs.launchpad.net/bugs/574232
You received this bug notification because you are a member of Ubuntu
Bugs, wh
Finally! The solution for #2 is to do:
partman/alignment=cylinder
After this bootparam (in pxelinux.cfg/default), mdadm did the right
thing and the system booted just fine.
Note that this is done on 2 different x86_64 systems:
1. Sun workstation Ultra20 m2
2. HP xw4600
Both have 2 SATA disks o
And sure enough, this bug report has the right solution in comment #3 :
https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/574232/comments/3
"Probably related to Bug #561573 and Bug #551965
Appending partman/alignment=cylinder as kernel boot parameter solved the
problem for me."
--
I believe this bug boils down to the disk being partition in the wrong
way by d-i. Take a look at this:
r...@zod[~]# cfdisk /dev/sdb
FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylind
Press any key to exit cfdisk
r...@zod[~]# fdisk -l /dev/
Pasi,
Thanks. I'm sure I had this option before. I tried that and it indeed
allowed the preseed to continue.
When done, I still see the /dev/md1p1 weird partitions and I get dropped
to initramfs shell to fix it manually. This sucks.
--
preseed Lucid with RAID and LVM fails to boot
https://bugs.
@Axel Beckert
I've taken the source package from unstable and compile this on Lucid (only
changes was s/unstable/lucid/ in debian/changelog and debian/NEWS. Not that
this is absolutely needed, but for my local repo ;-))
I'm about to get a kernel and test this.
Thanks for all the nice work you d
** Attachment added: "preseed recipe for lvm, raid installation"
http://launchpadlibrarian.net/50032963/partman-auto-raid.seed
** Changed in: partman-auto-raid (Ubuntu)
Assignee: (unassigned) => Colin Watson (cjwatson)
--
preseed Lucid with RAID and LVM fails to boot
https://bugs.launch
Public bug reported:
Binary package hint: partman-auto-raid
System fails to boot after preseed Lucid (10.04) to create RAID1 + LVM
partitions:
1. I can never preseed away the question to confirm that the partition should
be committed (d-i partman-md/confirm boolean true)
2. after reboot, /dev/m
Ok. So I switched to using apt-cacher-ng for my caching and started to
see this bug again.
To fix this, just remove all the Sources, Packages and Translation files
from /var/cache/apt-cacher-ng (apt-cacher has the same issues)
directory. Example:
DIR=/var/cache/apt-cacher-ng
cd $DIR || exit 1
for
oh my, nevermind my previous comment... i just realized this is the
client not the server.
sorry :-)
--
[FFE] tftpd-hpa doesn't start on boot
https://bugs.launchpad.net/bugs/522509
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubu
What happened here? there is no /etc/init/*.conf and/or init.d. And the
/etc/default/tftp-hpa is missing...
$> apt-cache policy tftp-hpa
tftp-hpa:
Installed: 5.0-11ubuntu2
Candidate: 5.0-11ubuntu2
Version table:
*** 5.0-11ubuntu2 0
500 http://archive.ubuntu.com/ubuntu/ lucid/main Pa
@#$
http://apt is my local apt-cacher-ng instance
--
invalid unicode in description
https://bugs.launchpad.net/bugs/554412
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:/
for the record:
$> apt-cache policy software-center
software-center:
Installed: 2.0.2
Candidate: 2.0.2
Version table:
*** 2.0.2 0
500 http://apt/archive.ubuntu.com/ubuntu/ lucid/main Packages
100 /var/lib/dpkg/status
$> ls /var/lib/apt/lists/*Translation*
ls: cannot access
the latest version fixes this issue. please close it
--
invalid unicode in description
https://bugs.launchpad.net/bugs/554412
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https
I hit this same bug
/etc/auth-client-config/profile.d/ldap-auth-config only defines :
[lac_ldap]
nss_passwd=passwd: files ldap
nss_group=group: files ldap
nss_shadow=shadow: files ldap
nss_netgroup=netgroup: nis
Which is parsed like:
+
acc_TYPE.setProfil
** Patch added: "gvfs ipad patch"
http://launchpadlibrarian.net/44266031/gvfs-ipad-patch.diff
--
ipad icon missing on afc mount
https://bugs.launchpad.net/bugs/563825
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs ma
Public bug reported:
Binary package hint: gvfs
When plugging the 3GS iPhone to Ubuntu Lucid, the icon for the iphone
and the volume is mounted.
When doing the same with the iPad, it does not get recognized.
This is a patch that fixes that:
http://git.gnome.org/browse/gvfs/commit/?id=1cb5861795
This is a link to the screenshot
http://www.fotolog.com/predicante/64809993
--
invalid unicode in description
https://bugs.launchpad.net/bugs/554412
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bug
Installed languages are:
$> locale -a
C
en_AG
en_AU.utf8
en_BW.utf8
en_CA.utf8
en_DK.utf8
en_GB.utf8
en_HK.utf8
en_IE.utf8
en_IN
en_NG
en_NZ.utf8
en_PH.utf8
en_SG.utf8
en_US
en_US.utf8
en_ZA.utf8
en_ZW.utf8
POSIX
I'm setup to use en_US.utf8
$> locale
LANG=en_US.utf8
LANGUAGE=en
LC_CTYPE="en_U
My main desktop just hit this very problem today. at 70% it stops and
nothing else happens.
this has raid-1 disks so I'm afraid of booing from another source and
having to do all that manually.
--
Lucid boot failed to complete after fsck
https://bugs.launchpad.net/bugs/554079
You received this b
this bug should be closed.
I had the same problem today and I simply commented out the TLS suite portion.
That allowed things to work just fine.
(see comment # 19
https://bugs.launchpad.net/ubuntu/+source/openldap/+bug/217159/comments/19
)
The documentation should be updated not to say to use
here is a few things about this bug (once again):
1. this is an Ubuntu only bug. I know Ubuntu does not really support
"universe" and this should be done upstream (i.e. through debian).
However, this bug was introduced by lsb-base package which is managed by
Ubuntu.
2. the "fix" for this bug woul
i just hit this bug on a new karmic installation on a Toshiba Satellite
A105-2101.
I tried everything I could:
- booting from cdrom
- booting from USB
- booting from netboot
until I removed "quiet" and then saw the infamous "clocksource tsc unstable
(delta = . ns )
I tried clocksource=
@John Dong very well said!
Granted, I should've acted on this quicker since I also use Ubuntu as my
main desktop... but we are here and the problem still exist, so let's
work around it for now.
--
[Jaunty] splashy 0.3.13-3ubuntu1 fresh install conflicts with lsb-base
https://bugs.launchpad.net/b
now, I was thinking this was something that debian changed and Ubuntu
followed suit, but this is not the case.
/etc/lsb-base-logging.sh is sourced from LSB functions so users are
allowed to change the way init scripts call the init scripts. To allow
things like, presenting a progressbar during boo
Ummm... it looks like this bug keeps popping back.
Can we work on this together? I have missed notifications for a few of
the comments made here and now somebody pointed to this again.
I thought this was resolved somehow...
--
[Jaunty] splashy 0.3.13-3ubuntu1 fresh install conflicts with lsb-ba
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/33364328/Dependencies.txt
** Attachment added: "Disassembly.txt"
http://launchpadlibrarian.net/33364329/Disassembly.txt
** Attachment added: "IfupdownConfig.txt"
http://launchpadlibrarian.net/33364334/IfupdownConfig.t
Public bug reported:
Description:Ubuntu karmic (development branch)
Release:9.10
network-manager-gnome:
Installed: 0.8~a~git.20091002t194214.8515a07-0ubuntu1
Candidate: 0.8~a~git.20091002t194214.8515a07-0ubuntu1
Version table:
*** 0.8~a~git.20091002t194214.8515a07-0ubuntu1 0
remember that on karmic the ecryptfs directory is now
~user/../.ecryptfs/user/.ecryptfs
luvly uh?
It's a better location for this, but your patch will not fix this
--
deluser --remove-home leaves /var/lib/ecryptfs/ behind
https://bugs.launchpad.net/bugs/347970
You received this bug notification
my systems hit this bug during Jaunty and now on Karmic it still shows
the same crap.
there should be a "verbose" option on edac to throw this errors if one
wants them. and keep quiet by default.
i also rmmod this from my system... i have no idea what this is used for
but obviously is not working
Public bug reported:
when adding a user with an encrypted home directory passing the group ID
from the CLI, the utility fail to set the permissions to the .ecryptfs
and .Private directory.
Here is an example:
adduser --uid 1030 --gid 115 --encrypt-home lmondesi
...
chown: invalid group: `lmondes
I hit this bug while installing on a ASRock 4coredual-vsta motherboard
(http://www.asrock.com/MB/overview.asp?Model=4CoreDual-VSTA).
I was using the Karmic beta CD currently on Ubuntu.com. Since sata_via
is so widely used, please add this to the "known issues" so it's easier
for others to know wha
Hello all,
I'm one of the splashy developers. This should be a bug against lsb-base
as it shouldn't provide the file /etc/lsb-base-logging.sh. This file is
provided by packages that want to tap into the "hooks" from running the
init scripts (/etc/init.d/*).
Splashy needs to do something as init s
Public bug reported:
After installing from Karmic Alpha-4 ISO I got the following error:
Unpacking kdebase-workspace-bin (from
.../kdebase-workspace-bin_4%3a4.3.0-0ubuntu13_i386.deb) ...
dpkg: error processing
/var/cache/apt/archives/kdebase-workspace-bin_4%3a4.3.0-0ubuntu13_i386.deb
(--unpack
I hit this same bug on an IBM (Lenovo) X60s laptop. The workaround
(https://bugs.launchpad.net/ubuntu/+source/netbook-
launcher/+bug/317026/comments/12) work fine but still not a proper
solution as the system still feel sluggish (response time for the
animations are horrible).
I also have this pro
I got this same issue on an OQO model 02 with Jaunty
03:04.0 Ethernet controller [0200]: Atheros Communications Inc. AR5413
802.11abg NIC [168c:001b] (rev 01)
Subsystem: Atheros Communications Inc. Device [168c:1602]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParE
I got the same issue with alternate CD for RC1. I posted first here:
http://ubuntuforums.org/showthread.php?t=1083783
My workaround was simple (and after rebooting I was able to install
ubuntu-desktop).
Going to tty2 (CTRL+Alt+F2) shows that /cdrom has the right stuff.
/target/cdrom points to med
Hello Dustin,
If you see my original post (the first one) it does mention the preseed
file is attached to this bug report.
http://launchpadlibrarian.net/21266763/ubuntu-desktop-experimental.seed
--
netboot newuser and ecryptfs fails to login
https://bugs.launchpad.net/bugs/317895
You received t
I guess you are not using a fully automated install. Try using a preseed
file with all the questions you need for a basic installation.
On Wed, Mar 18, 2009 at 6:49 PM, Dustin Kirkland
wrote:
> Hi Mackenzie-
>
> I still haven't been able to reproduce this issue.
>
> I just installed from the mini
I filed a new bug:
https://bugs.launchpad.net/ecryptfs/+bug/317895
--
add support for setting up encrypted home directory on user creation
https://bugs.launchpad.net/bugs/302870
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-
@Michael Rooney
U... I'll fill out a propper bug and link to this then.
@Dustin Kirkland
I used the desktop (alternate) installer and grab the netboot folder
from it.
--
add support for setting up encrypted home directory on user creation
https://bugs.launchpad.net/bugs/302870
You received
partitions map for preseed
** Attachment added: "partitions.txt"
http://launchpadlibrarian.net/21250808/partitions.txt
--
add support for setting up encrypted home directory on user creation
https://bugs.launchpad.net/bugs/302870
You received this bug notification because you are a member of
fresh install of Ubuntu Jaunty (downloaded today from daily) using amd64
and netboot to install the system. Once the system came up everything
was normal except that I could not login.
I tried everything I could think of to allow the user to write to its
$HOME but it seems that .ecryptfsrc wasn't
We got bitten by this very bug! I spent a long time making sure it
wasn't anything on our network but what clear things up for me was this:
copying from Hardy to Hardy works
copying from Hardy to Solaris does not
copying from Solaris to Solaris works
So, obviously it's not the network devices tha
I was bitten by this today and moving pidgin-otr worked for me.
what a bug...
--
pidgin resolver process crashes with ldap accounts
https://bugs.launchpad.net/bugs/248684
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs m
Script use to talk to an XMPP server directly and send messages to users
** Attachment added: "Useful for Nagios"
http://launchpadlibrarian.net/19838335/notify_via_xmpp
--
Can't use an undefined value as a HASH reference at
/usr/share/perl5/XML/Stream.pm line 1165.
https://bugs.launchpad.ne
** Attachment added: "workaround to fix this issue"
http://launchpadlibrarian.net/19838329/Stream.pm.diff
--
Can't use an undefined value as a HASH reference at
/usr/share/perl5/XML/Stream.pm line 1165.
https://bugs.launchpad.net/bugs/300750
You received this bug notification because you ar
Public bug reported:
Binary package hint: libxml-stream-perl
I have a notification script for Nagios that uses XMPP to send alerts to
a buddy. This uses libnet-xmpp-perl.
When it runs it generates this alert on Ubuntu Hardy 8.04.1:
./custom_plugins/notify_via_xmpp [EMAIL PROTECTED] 'test'
Can't
Public bug reported:
Binary package hint: bind9
Intro:
Change your logging options to log to /var/log/named (as permitted by
default apparmor profile). When the logs reach the limit and named
attempts to rotate the file, apparmor denies reading from the directory
(listing) so it cannot create th
Splashy 0.3.12 was released and there is an Ubuntu Hardy package at the
Alioth server:
http://alioth.debian.org/frs/?group_id=30657
This should work fine on Intrepid as well.
--
[apport] splashy crashed with SIGSEGV
https://bugs.launchpad.net/bugs/92276
You received this bug notification becaus
Public bug reported:
Binary package hint: traceroute
when trying to traceroute using a ppp interface, the tx_queue_len buffer
fills up and causes this weird alert.
this is a known issue that has been fixed on Fedora:
http://webui.sourcelabs.com/fedora/issues/245438
this works:
sudo traceroute
same here using ubuntustudio-desktop on an OQO.
what does this mean?
--
could not find compatible GRE
https://bugs.launchpad.net/bugs/255515
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.
ok, poller.php segfaulted because the database did not get initialized
properly by dbconfig. once i ran the table creation by hand it worked.
now everything works fine.
--
/usr/share/cacti/site/poller.php failed
https://bugs.launchpad.net/bugs/123076
You received this bug notification because yo
I can confirm that on Hardy 8.04.1 the ending php tag is missing ?>.
Perhaps this bug is unrelated...
I did a new installation of cacti on a 64bit system with apache2 and I'm
getting segfaults. This is the third installation I do in 2 weeks and
the previous two worked fine. This server is a clean
dbconfig-common also "forgot" to close the PHP tag on my Hardy 8.04.1
cacti installation. After placing ?> at the end of the file, everything
worked.
--
/usr/share/cacti/site/poller.php failed
https://bugs.launchpad.net/bugs/123076
You received this bug notification because you are a member of Ub
** Attachment added: "simple patch to illustrate the solution better"
http://launchpadlibrarian.net/17527602/squid-logrotate.patch
--
logrotate uses outdated sarg script
https://bugs.launchpad.net/bugs/268816
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
Binary package hint: squid
Because of the way that logrotate, cron and sarg are setup, squid's
logrotate configuration must be changed to call sarg-reports on a daily
basis as:
test ! -x /usr/sbin/sarg-reports || /usr/sbin/sarg-
reports today
This is a known
On Aug 24, 2008, at 9:37, Connor Imes <[EMAIL PROTECTED]> wrote:
> Thank you for taking the time to report this bug and helping to make
> Ubuntu better. You reported this bug a while ago and there hasn't been
> any activity in it recently. We were wondering is this still an issue
> for you? Can yo
Public bug reported:
Binary package hint: workrave
$> cat /usr/share/dbus-1/services/org.workrave.Workrave.service
[Workrave D-BUS Service]
Name=org.workrave.Workrave
[EMAIL PROTECTED]@/workrave
I believe that @bindir@ was supposed to be parsed/replaced but this doesn't
happen on Hardy.
** A
Same here on Hardy 8.04.1.
After I added Google Calendar as my default calendar for Evolution, I
cannot click on the calendar applet anymore -- without crashing gnome-
panel.
killall gnome-panel fixes it.
I was hoping that a fix will be available by the time this bothered me,
but... Here I am lo
On Tue, Jul 22, 2008 at 10:40 AM, Noam Lewis <[EMAIL PROTECTED]> wrote:
> I'm using Hardy 8.04.
> Splashy fails with:
> $ splashy test
> Splashy ERROR: Couldn't splashy_start_splashy(). Error -2
>
> but doesn't crash.
This just means that you have not setup the framebuffer properly. See
our README
do:
sudo dpkg -P usplash usplash-themes
usplash needs to be removed from initramfs
--
Splashy doesn
https://bugs.launchpad.net/bugs/94689
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ub
I'm the main developer of Splashy and I use it with Hardy. Can somebody
please confirm this bug for me?
I never realized there were bugs here for Splashy, as well as the Debian
Bugs Tracking System.
--
[apport] splashy crashed with SIGSEGV
https://bugs.launchpad.net/bugs/92276
You received this
This bug hit me with a fresh installation of Ubuntu Hardy and 2 things
were noticeable:
1. USB volumes did not automount (that includes iPods and stuff)
2. all the *-admin utilities would not allow me to authenticate. The button was
just gray-out.
To fix this I did:
1. start in single-user-mode
Fixed:
The problem seems to be because of Nautilus. I did the following and
this fixed it for me:
gconftool-2 --recursive-unset /apps/nautilus
gconftool-2 --recursive-unset /apps/nautilus-cd-burner
pkill nautilus
Note that on Debian/Ubuntu Nautilus is supposed to handle the automounts
of things
it looks like gnome-open is trying to open $HOME/burn:/// and it fails:
strace gnome-open burn:///
...
access("/Users/user/burn:///", F_OK) = -1 ENOENT (No such file or directory)
...
Is this how this is supposed to happen? I'm about to dig into the source
code for libgnome2-0
--
"gnome-open
boy, i installed Ubuntu Hardy 64bit from scratch and this is the first
thing that hit me. Awful bug. No workarounds?
--
"gnome-open burn:///" fails with "The default action does not support this
protocol"
https://bugs.launchpad.net/bugs/226854
You received this bug notification because you are a
Well, I think this is a good hint:
** (gnome-mount:3710): WARNING **: Caught exception 'Another client is
already authenticating. Please try again later.'
I got this after I logged out, switched to a console. pkill -U all processes
under my user name (from another user). Then went into /tmp and
I spent my best part of today trying to figure out why this happens... I
took my ipod to a friends system and he's using Hardy (32bit). The
system works fine and the ipod launches Amarok
(System->Preferences->Preferred Appliactions changed to launch Amarok
when the ipod is plugged in. I'm using Ubu
Well, not true:
debian::
# if version is less than 4.2.4, then upgrade
ntp pkgmgr=${pkg_mgr} version=4.2.4 cmp=lt elsedefine=needs_ntp
...
cfagent -qv
Package: ntp
Something impossible happened... ('grep' exited abnormally).
And the C code is correct:
while (!feof (pp))
{
>From those emails it looks like the debian package requires the
"version" portion... Ouch.
--
Test for installed packages in cfengine is broken
https://bugs.launchpad.net/bugs/232450
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
u
I was bitten by this same bug. I'm working to see why this happens.
--
Test for installed packages in cfengine is broken
https://bugs.launchpad.net/bugs/232450
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I only have one camera and it works fine with other programs.
$> v4l-info
### video4linux device info [/dev/video0] ###
general info
VIDIOCGCAP
name: "CPiA Camera"
type: 0x201 [CAPTURE,SUBCAPTURE]
channels: 1
I have the same issue. The mobo supports floppy but the drive is
disconnected (not being used).
This fixed my problem:
all_generic_ide floppy=off irqpoll
As suggested by this post:
http://ubuntuforums.org/showthread.php?t=767154
Background info:
The box was running Gutsy and upgraded from the
I am doing a series of installations of Hardy using FAI and everytime
the dhcp file gets the wrong permissions.
I added the following rules to cfengine to fix this for me on boot:
control:
AddInstallable = ( needs_networking_restarted )
files:
# hardy has the wrong permissions for this
disabling selinux fixed this issue
sudo setenforce 0
...
install went smooth
...
This log will help you on Hardy selinux's config:
Feb 8 09:56:52 zod kernel: [317258.631910] audit(1202482612.579:1616): avc:
denied { execmod } for pid=10812 comm="firefox-bin" name="nppdf.so" dev=loop0
i
Public bug reported:
Binary package hint: firefox
$> sudo apt-get install firefox
Reading package lists... Done
Building dependency tree
Reading state information... Done
firefox is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully insta
Nope. I reverted back and it didn't help.
I noticed that when I go to the console and press Super+F1 I get
switched to TTY1 just the same as if I pressed ALT+F1. I'm not sure
whether this is how things should work.
I upgraded another box of mine to ...12ubuntu8.3 and the keys didn't
swap. Talk ab
This happened to me on Gutsy on 2 different systems on 2 different
networks and the NFSv4 server is Solaris on one and Debian Etch on the
other.
I don't think this has anything to do with Samba. NFSv3 works.
$> uname -a
Linux tuxy 2.6.22-14-generic #1 SMP Tue Dec 18 08:02:57 UTC 2007 i686 GNU/Linu
Please close this bug...
--
kernel oops after 2 hours
https://bugs.launchpad.net/bugs/41209
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinf
Here is my xorg.conf
$> lspci |grep -i vga
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200]
(rev a1)
$> selinuxenabled
$> echo $?
0
$> cat /proc/mounts |grep selin
none /selinux selinuxfs rw 0 0
$> uname -a
Linux tuxy 2.6.22-14-generic #1 SMP Tue Dec 18 08:02:57 UT
Public bug reported:
After upgrading my Gutsy system to xorg-xserver-core version 2:1.3.0.0
.dfsg-12ubuntu8.3 my left-hand Super and ALT keys swapped behavior.
Pressing Super acts like ALT now.
I didn't change anything else in the system. My keyboard is still set to
Microsoft Natural (as it was).
88 matches
Mail list logo
