On Tue, 2003-06-03 at 13:55, jeff allen wrote:
> I have just recently updated the disk image on all 22 linux machines in our
> office. If I try to ssh into these machines I get the following error:
>
> @@@
> @WARNING: REMOTE HOST IDENTIF
On Fri, 14 Feb 2003, Burke, Thomas G. wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Hey guys,
>
> I've got everything up & running, but there seems to be a small
> hitch.
>
> RP-PPPoE works fine if I use the TK interface for it (tkpppoe), but
> if I try to run it from
to do (e.g. jumper pins).
The I hook in the basics: CDROM, 1 HD, Video. I then check the bios
settings. After you are happy with this you can either install RedHat
after which you install any remaining hardware. Or install all hardware
first.
Stephen
--
Stephen Torri <[EMAIL PROTECTED]
On Mon, 2003-01-13 at 15:30, Burke, Thomas G. wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Hey gang,
>
> Well, as you probably know, DirecTV is stopping all operations...
> In our area, we have 2 choices - Verizon (@$80/month), and Earthlink
> (through Covad @ $65/month)...
On Mon, 2003-01-13 at 15:30, Burke, Thomas G. wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Hey gang,
>
> Well, as you probably know, DirecTV is stopping all operations...
> In our area, we have 2 choices - Verizon (@$80/month), and Earthlink
> (through Covad @ $65/month)...
This acts like a Windows
Fileserver so that from XP you can read/write to your Linux server.
While in Linux you can use samba or NFS to share the files to your linux
clients.
Stephen
--
Stephen Torri <[EMAIL PROTECTED]>
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTEC
Force 2 driver for 8.0? If so.. where can I
> find it.
>
> Thanks
Check out www.nvidia.com. They are providing binary only driver library
and open source driver. Its suppose to work for all nvidia cards.
Stephen
--
Stephen Torri <[EMAIL PROTECTED]>
--
redhat-list mailing lis
A switch? What is the rating of that device? 10Mbps? 100Mbps?
Stephen
--
Stephen Torri <[EMAIL PROTECTED]>
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
Did you get the message to the RedHat mailing list saying that you are
using the wrong driver for the card. What card do you have?
Stephen
--
Stephen Torri <[EMAIL PROTECTED]>
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redh
tching Device section for instance (BusID PCI:1:5:0)
> found
>
> (EE) No devices detected.
>
What does the XF86Config file say about BuSID PCI 1:5:0? Can I look at
your XF86Config file.
Stephen
--
Stephen Torri <[EMAIL PROTECTED]>
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
On Fri, 2002-06-07 at 00:22, Brian wrote:
> I have a DSL connection that now connected to my Redhat 7.3 box, it
> acting as a router/firewall. Up to now ,I just have a established
> connection and allow nothing inbound only outbound, now I would like to
> setup a VPN to my network, I have selected
You need to know the model and brand, (easy you can see it) but look at
the xsane homepage (www.xsane.org). This should give you a start.
Stephen
On Fri, 2002-04-12 at 07:08, M.Schild wrote:
> Hello, can anyone tell me how i can get Xsane to recognize my scanner (
> parallel port)? Thank you
>
What is the speed of the link that the ISP reported you could receive? The
limit for the link? I find that its hard to believe an ADSL link can't
beat an ISDN. Unless ofcourse you are really far from the CO.
Stephen
On Sat, 12 Jan 2002, Thomas V. Fischer wrote:
> All,
>
> Can anyone give me
On Wed, 9 Jan 2002, Sarig Scudder wrote:
> However, when I try to retrieve Emails from the POP server my email client
> (Balsa) gives me an error saying it is having trouble connecting to the
> server. This seems strange because I can see traffic on the network and
> modems (via the lights) and
On Tue, 8 Jan 2002, gary wrote:
> Dear all,
>
> Any idea on how to host email/web on ADSL(dynamic ip) on RH???
> Is there a way to do it? or it is impossible???
>
> rdgs,
> gary
Who is going to access this server? Do you have an internal network? I am
not sure who is going to be playing with
On Sun, 6 Jan 2002, Ian Truelsen wrote:
> It looks like, in my case anyway, that the old UDMA33 drive in my server is
> the bottleneck. hdparm -t reports it as doing buffered reads at a little
> under 4 MB/s, which is about the speed I am getting, minus a bit for network
> overhead. I do inten
On Sun, 6 Jan 2002, Ian Truelsen wrote:
> Recently I have been transferring some large files between my computers. I
> have a 100Mbps connection between the two, but the actual transfer speed is
> being reported at less than 3Mbps. Now, admittedly, one of the computers has
> a UDMA 33 drive, b
On 24 Dec 2001, Jake Colman wrote:
>
> I'd like to run squid under RH 7.2. The primary purpose is to force all web
> access through squid so that I can squid's proxy authorization and the squid
> access.log to track where my user's have gone on the web.
>
> Some questions:
>
> 1) Using iptabl
loops during startup? Is there a
short example someone could send me that proves it works? That way I could
fix my start up script.
Stephen Torri
[EMAIL PROTECTED]
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
Is up2date only available for users that both a RedHat boxed set?
Stephen Torri
On 7 Dec 2001, Trond Eivind Glomsrød wrote:
> "Jeremy C. Reed" <[EMAIL PROTECTED]> writes:
>
> >Before applying this update, make sure all previously released errata
> >
On Tue, 4 Dec 2001, Stephen Liu wrote:
> Hi Robert,
>
> Thanks. It works now.
>
> What will be "Red Hat Linux (2.4.7-10smp)" on the starting screen for ?
If I gather you are asking "Why does Red Hat Linux (2.4.7-10smp) appear on
the grub startup screen?". Looking at your grub.conf file belo
I can use a variety of fonts within the gnome terminal. Occasionally I run
into problem with fonts displaying irradically. For example using the
following font does not clear the screen the command "clear" is executed:
-abisource-arial-regular-r-normal-*-*-140-*-*-p-*-iso8859-1
You can still s
22 matches
Mail list logo
