Thanks a bunch Ross, the latest version 2013.04.06 doesn't exhibit any such
problems with the cameras I have on test here. Everything is working
beautifully!
I will report if there are any problems.
Thanks again for adding a workaround so quickly.
On 5 April 2013 18:19, Ross Finlayson wrote:
> Could this problem be related to another issue I’ve recently had with using
> proxy server with vlc as the back end server. The RTSP session timeout is
> hardcoded to 60 secs in VLC . The VLC RTSP server does support GET_PARAMETER
> and PAUSE as shown in OPTIONS. But when live555 proxy client
Ross Finlayson
Sent: Friday, April 05, 2013 5:32 AM
To: LIVE555 Streaming Media - development & use
Subject: Re: [Live-devel] live555ProxyServer freezes after upgrading from
2012.12.24
I've compiled the latest version and unfortunately I'm seeing the exact same
output as above,
> I've compiled the latest version and unfortunately I'm seeing the exact same
> output as above, after about 2 and a half minutes of streaming, I see this:
>
> Sending request: GET_PARAMETER rtsp://86.162.35.136/axis-media/media.amp/
> RTSP/1.0
Oops, sorry - my mistake. My earlier 'fix' wasn'
> I've compiled the latest version and unfortunately I'm seeing the exact same
> output as above, after about 2 and a half minutes of streaming, I see this:
>
> Sending request: GET_PARAMETER rtsp://86.162.35.136/axis-media/media.amp/
> RTSP/1.0
You must not have upgraded properly. With the la
On 4 April 2013 10:16, Ross Finlayson wrote:
> I find this very difficult to believe - especially considering that nobody
> else has reported this problem.
>
I'm not sure what to say but GET_PARAMETER is causing problems with almost
all cameras I have here to test (excluding a Chinese no brand o
> Unfortunately it appears to happen on all branded cameras I have to test:
> ACTi, Sony, Axis, D-Link, Vivotek and Lilin.
I find this very difficult to believe - especially considering that nobody else
has reported this problem.
Nonetheless, because you provided definitive evidence of at least
Thanks for your fast reply.
Unfortunately it appears to happen on all branded cameras I have to test:
ACTi, Sony, Axis, D-Link, Vivotek and Lilin. I updated the firmware on this
specific Sony camera to the latest last week.
It appears to be a very typical response to kill the connection when
rece
> Hi, sorry, it's a dynamic IP and there was a power cut:
>
> rtsp://86.146.238.165/media/video1
OK, I've tested this now.
You're correct that your camera server appears to crash (closing down the TCP
connection) and reboot whenever it receives the proxy's "GET_PARAMETER"
command. I.e., the
Hi, sorry, it's a dynamic IP and there was a power cut:
rtsp://86.146.238.165/media/video1
On 4 April 2013 03:56, Ross Finlayson wrote:
> The stream will freeze after a few minutes. When the stream is opened
> directly, it does not freeze:
>
> ./testProgs/testRTSPClient rtsp://86.146.236.49/me
> The stream will freeze after a few minutes. When the stream is opened
> directly, it does not freeze:
>
> ./testProgs/testRTSPClient rtsp://86.146.236.49/media/video1
Sorry, but I can't access this stream.
Ross Finlayson
Live Networks, Inc.
http://www.live555.com/
__
With version 2012.12.24, live555ProxyServer can proxy Sony, Vivotek, Axis
and other IP cameras, but after upgrading to 2013.01.25 or newer (tried
with 2013.04.01 also), the proxy freezes with all of the above IP cameras.
I have made a stream publicly available, to reproduce, run:
./proxyServer/li
12 matches
Mail list logo
