On Saturday 25 January 2025 15:28:49 Greenwich Mean Time Alan Mackenzie wrote:
> Hello, Dale.
[snip ...]
> You're absolutely right. I was missing CONFIG_SND_USB_AUDIO, a setting
> that builds in the USB sound driver. I'm not sure how I worked that out,
> but probably somewhere on my Internet sea
Hello, Karl.
On Sat, Jan 25, 2025 at 09:00:12 +0100, k...@aspodata.se wrote:
> Alan Mackenzie:
> ...
> > Then I attempt to use alsamixer to unmute the speakers and, hopefully get
> > some sound out of them. This is where my problems start.
> > alsamixer displays just one object, labelled S/PDIF
Alan Mackenzie wrote:
> Hello, Dale.
>
> On Fri, Jan 24, 2025 at 14:53:30 -0600, Dale wrote:
>> Alan Mackenzie wrote:
>>> Hello, Gentoo.
>>> I've finally got around to buying a pair of new loadspeakers for my new
>>> (as of 2024-08) PC. The experience has not been relaxed and obvious.
>>> I have c
Hello, Dale.
On Fri, Jan 24, 2025 at 14:53:30 -0600, Dale wrote:
> Alan Mackenzie wrote:
> > Hello, Gentoo.
> > I've finally got around to buying a pair of new loadspeakers for my new
> > (as of 2024-08) PC. The experience has not been relaxed and obvious.
> > I have connected the speakers up p
On Saturday 25 January 2025 08:00:12 Greenwich Mean Time k...@aspodata.se
wrote:
> Alan Mackenzie:
> ...
>
> > Then I attempt to use alsamixer to unmute the speakers and, hopefully get
> > some sound out of them. This is where my problems start.
> >
> > alsamixer displays just one object, label
Alan Mackenzie:
...
> Then I attempt to use alsamixer to unmute the speakers and, hopefully get
> some sound out of them. This is where my problems start.
>
> alsamixer displays just one object, labelled S/PDIF in the middle of the
> screen. I don't have an S/PDIF connection, just an ordinary au
Alan Mackenzie wrote:
> Hello, Gentoo.
>
> I've finally got around to buying a pair of new loadspeakers for my new
> (as of 2024-08) PC. The experience has not been relaxed and obvious.
>
> I have connected the speakers up physically. I have made the necessary
> settings in the kernel configurati
Hello, Gentoo.
I've finally got around to buying a pair of new loadspeakers for my new
(as of 2024-08) PC. The experience has not been relaxed and obvious.
I have connected the speakers up physically. I have made the necessary
settings in the kernel configuration, rebuilt and rebooted into it.
On Friday, 16 February 2024 12:30:48 GMT J. Roeleveld wrote:
> On Friday, February 16, 2024 6:19:25 AM CET Peter Humphrey wrote:
> > On Wednesday, 14 February 2024 11:35:18 GMT J. Roeleveld wrote:
> > > I've been using postfix for longer than I can remember.
> > > The config entries I changed from
On Friday, February 16, 2024 6:19:25 AM CET Peter Humphrey wrote:
> On Wednesday, 14 February 2024 11:35:18 GMT J. Roeleveld wrote:
> > I've been using postfix for longer than I can remember.
> > The config entries I changed from default are:
> >
> > --- main.cf ---
> > myhostname =
> > mydomain
On Wednesday, 14 February 2024 11:35:18 GMT J. Roeleveld wrote:
> I've been using postfix for longer than I can remember.
> The config entries I changed from default are:
>
> --- main.cf ---
> myhostname =
> mydomain =
> myorigin =
> mynetworks = 192.168.1.0/24>
That's helpful - thanks Joost
On Tuesday, February 13, 2024 4:52:03 PM CET Peter Humphrey wrote:
> Hello list,
>
> For years, I've been using postfix to accept mail from LAN hosts, and from
> the Internet via my ISP. This has never worked as I want it - it's just so
> complex to set up and understand. Well, it is for a bear of
On Tue, 13 Feb 2024 at 23:11, Peter Humphrey wrote:
> On Tuesday, 13 February 2024 17:20:40 GMT Arve Barsnes wrote:
> I think those entries must be for sendmail.
Yes, that machine has sendmail from mail-mta/opensmtpd, not postfix,
not sure it matters.
> > In /etc/postfix/main.cf there is this, a
On Tuesday, 13 February 2024 17:20:40 GMT Arve Barsnes wrote:
> I'm not sure I quite understood where you're having problems, but I
> have a machine that accepts mail from the LAN through postfix, so I'll
> show some of my setup. Replace any <> with your hostnames.
> On the LAN machine I don't hav
On Tue, 13 Feb 2024 at 16:52, Peter Humphrey wrote:
> For years, I've been using postfix to accept mail from LAN hosts, and from the
> Internet via my ISP. This has never worked as I want it - it's just so complex
> to set up and understand. Well, it is for a bear of little brain like me.
>
> Can
Hello list,
For years, I've been using postfix to accept mail from LAN hosts, and from the
Internet via my ISP. This has never worked as I want it - it's just so complex
to set up and understand. Well, it is for a bear of little brain like me.
Can someone tell me how to make postfix accept all
Hello, Alan.
On Wed, Jan 11, 2023 at 20:16:07 +, Alan J. Wylie wrote:
> Alan Mackenzie writes:
> > My system isn't booting. In particular, most of the SSD partitions
> > won't mount, because they are not under /dev any more. The root
> > partition, /dev/md125 mounts, but that is all.
> >
Alan Mackenzie writes:
> My system isn't booting. In particular, most of the SSD partitions
> won't mount, because they are not under /dev any more. The root
> partition, /dev/md125 mounts, but that is all.
>
> These partitions are lvm partitions under RAID-1 (software RAID). They
> simply fai
Hello, Gentoo.
My system isn't booting. In particular, most of the SSD partitions
won't mount, because they are not under /dev any more. The root
partition, /dev/md125 mounts, but that is all.
These partitions are lvm partitions under RAID-1 (software RAID). They
simply fail to appear in /dev/
On Thursday, 27 October 2022 08:54:36 BST I wrote:
> On Wednesday, 26 October 2022 16:46:07 BST Neil Bothwick wrote:
> > On Wed, 26 Oct 2022 15:22:42 +0100, Peter Humphrey wrote:
> > > On booting the new system I get an error I haven't heard of before:
> > > dracut complaining "sysroot has no prope
On Wednesday, 26 October 2022 16:46:07 BST Neil Bothwick wrote:
> On Wed, 26 Oct 2022 15:22:42 +0100, Peter Humphrey wrote:
> > On booting the new system I get an error I haven't heard of before:
> > dracut complaining "sysroot has no proper sysfs layout". I'm sure I've
> > done something stupid, b
On Wed, 26 Oct 2022 15:22:42 +0100, Peter Humphrey wrote:
> On booting the new system I get an error I haven't heard of before:
> dracut complaining "sysroot has no proper sysfs layout". I'm sure I've
> done something stupid, but where do I start debugging this? Google
> hasn't helped.
Is CONFIG_
On Wednesday, 26 October 2022 16:47:46 BST Dale wrote:
> Peter Humphrey wrote:
> > Hello list,
> >
> > I'm installing Gentoo on a new Juno laptop, and I've reached the point of
> > booting into the new system. I have a separate /usr partition and I'm
> > using
> > dracut to create an initramfs.
>
Peter Humphrey wrote:
> Hello list,
>
> I'm installing Gentoo on a new Juno laptop, and I've reached the point of
> booting into the new system. I have a separate /usr partition and I'm using
> dracut to create an initramfs.
>
> On booting the new system I get an error I haven't heard of before:
Hello list,
I'm installing Gentoo on a new Juno laptop, and I've reached the point of
booting into the new system. I have a separate /usr partition and I'm using
dracut to create an initramfs.
On booting the new system I get an error I haven't heard of before: dracut
complaining "sysroot has n
On 01/30/2021 05:11:31 PM, Helmut Jarausch wrote:
My previously working configuration had
in /etc/autofs/auto.master the entry
/- auto_local.autofs
and
/etc/autofs/auto_local.autofs had entries like
/Src -fstype=btrfs,exec,suid,noatime
:UUID=95c22160-112e-4020-81cc-4721cf24
My previously working configuration had
in /etc/autofs/auto.master the entry
/- auto_local.autofs
and
/etc/autofs/auto_local.autofs had entries like
/Src -fstype=btrfs,exec,suid,noatime
:UUID=95c22160-112e-4020-81cc-4721cf241fd9
/home/jarausch/Gimp-fstype=bind,
Hi,
On 25/04/20 11:27 AM, Michael Orlitzky wrote:
On 4/25/20 11:20 AM, "Chris Phillips"@T O wrote:
How do I override the ./configure options for emerge [-r] ?
If it's a one-time thing, you can set the EXTRA_ECONF environment
variable to contain the extra arguments to ./configure. The content
On 4/25/20 11:20 AM, "Chris Phillips"@T O wrote:
>
> How do I override the ./configure options for emerge [-r] ?
>
If it's a one-time thing, you can set the EXTRA_ECONF environment
variable to contain the extra arguments to ./configure. The contents of
EXTRA_ECONF are appended to the end of the
Hi
I am a relative newbee to GenToo (*though familiar with all sorts of
Unix/Linux/BSD OS)
I am currently unable to complete a sync / build @world cycle because of a
bug building enchant-2.2.8 , compile fails because it doesn't recognize the
ObjC "@" syntax. There is a bug filed :
https://bugs.
Hello,
I see this msg in /var/log/dmesg:
[ 4.444826] EXT2-fs (sdb3): error: couldn't mount because of
unsupported optional features (2c0)
[ 4.468074] EXT4-fs (sdb3): mounted filesystem with ordered data
mode. Opts: (null)
but my system boots. Is the (2c0) the clue to what features are me
On Mon, Mar 02, 2020 at 02:40:14PM -0500, Walter Dnes wrote
> I'm checking out my old backup desktop machine and it has dropped to
> 1024x768 max.
Sorry to bother everybody. It only does 480P on Youtube, with max cpu
speed selected, so forget about trying to revive Gentoo on it. 2008
tech j
I'm checking out my old backup desktop machine and it has dropped to
1024x768 max. I distinctly remember it running 1920x1080 on my
1920x1080 monitor in the past. (When I say old, I mean a Dell Inspiron
530 from 2008) I'm using a KVM switch, like I always have. Could that
be the problem? xran
On Sunday, 8 December 2019 08:35:43 GMT Tamer Higazi wrote:
> Adding ipv6 address is not the deal.
>
> Question(s):
>
> How do you connect to the internet ?
>
> Do you connect through pppoe (point-to-point-over-ethernet) or over ppoa
> (point-to-point-over-atm) ?
>
> Does your modem handle the
Dear Peter,
Adding ipv6 address is not the deal.
Question(s):
How do you connect to the internet ?
Do you connect through pppoe (point-to-point-over-ethernet) or over ppoa
(point-to-point-over-atm) ?
Does your modem handle the dialin for you automatically?
In this case there are 2 other ch
On Friday, 6 December 2019 17:42:44 GMT Ralph Seichter wrote:
> ULA support, or rather the ability to assign additional static IPv6
> addresses to an interface, depends on the router's firmware. If you can
> make it work, https://cd34.com/rfc4193/ can help you generate a ULA
> prefix.
I can't app
* Peter Humphrey:
> My IPv6 address is indeed static.
Nice. In that case, you can of course use your router's global scope
address in /etc/hosts or DNS.
> The only IPv6 details my router shows are the LAN and WAN addresses,
> and 'ip -6 route show' on this host, although it lists six addresses
>
On Thursday, 5 December 2019 21:17:59 GMT Ralph Seichter wrote:
> * Peter Humphrey:
> > $ ping6 vdsl
> > ping: vdsl: No address associated with hostname
>
> The outcome of ping depends on /etc/resolv.conf and /etc/hosts, and even
> on the OS of the IPv6 nodes involved. Apple devices will be availa
* gentoo-u...@c-14.de:
> The easiest option is if you're using stateful DHCPv6. In this case
> you just need to set up your dhcp server to notify your dns server of
> any new leases.
That's what you consider "the easiest option"? ;-)
I usually ask the following of people starting with IPv6: Do y
* Peter Humphrey:
> $ ping6 vdsl
> ping: vdsl: No address associated with hostname
The outcome of ping depends on /etc/resolv.conf and /etc/hosts, and even
on the OS of the IPv6 nodes involved. Apple devices will be available as
somename.local, with "somename" being what the user configured as th
> Hello list,
Hi,
> Having been inspired by the recent discussion of IPv6, I decided to try it,
> starting with my ISP, my Billion Bipac vDSL modem-router and one host - this
> one. Of course it isn't straightforward.
>
> Zen has allocated me a /64 ND prefix and a /48 PD prefix. I found a way to
Hello list,
Having been inspired by the recent discussion of IPv6, I decided to try it,
starting with my ISP, my Billion Bipac vDSL modem-router and one host - this
one. Of course it isn't straightforward.
Zen has allocated me a /64 ND prefix and a /48 PD prefix. I found a way to
tell the Bipa
Just as a test set the 'icu inspector' USE FLAGS for net-libs/nodejs,
Then try this command, it should show how many packages would be pulled
in and their USE FLAGS :
emerge -pvt net-libs/nodejs
On 3/9/19 4:24 PM, allan gottlieb wrote:
> In trying to emerge chromium I received an error msg saying
In trying to emerge chromium I received an error msg saying that
net-libs/nodejs needed the "inspector" USE flag.
I added
>=net-libs/nodejs-8.12.0 inspector
to
/etc/portage/package.use chromium
Now I receive the msg
!!! The ebuild selected to satisfy ">=net-libs/nodejs-7.6.0[inspecto
* Neil Bothwick:
> That's because ~ doesn't mean unstable, it means testing. Stable in
> this context means less likely to change, not less likely to fall
> over. Plus the differentiation is for the ebuilds, not the software
> itself.
It is also worth mentioning that ebuilds cannot be added to th
On Sun, 18 Nov 2018 00:33:41 -0500, Andrew Udvare wrote:
> I switched fully to ACCEPT_KEYWORDS="~amd64" (make.conf) after running
> mixed for a while. These kinds of issues come up too often and I don't
> have a lot of time to solve them, plus for my dev machine I just don't
> notice stable vs uns
On 11/17/2018 10:33 PM, Andrew Udvare wrote:
I switched fully to ACCEPT_KEYWORDS="~amd64" (make.conf) after running
mixed for a while. These kinds of issues come up too often and I don't
have a lot of time to solve them, plus for my dev machine I just don't
notice stable vs unstable most of the
On 18/11/2018 00:23, Grant Taylor wrote:
>
> I'm not completely sure what that means. I'm guessing you're asking
> about accept_keywords. I'm mostly (?) running stock amd64. I have
> added ~amd64 to some packages for various reasons over the 2+ years that
> this install has been around.
I swit
On 11/17/2018 10:13 PM, Andrew Udvare wrote:
It looks like you need to unmask virtual/cargo because you need to have
virtual/cargo 1.30.1. These version numbers have to match.
That seems to have done it.
I added virtual/cargo to /etc/portage/package.accept_keywords/cargo
which did have dev-ut
On 17/11/2018 23:53, Grant Taylor wrote:
> On 11/17/2018 07:58 PM, Adam Carter wrote:
>
> These are the packages that would be merged, in order:
>
> Calculating dependencies... done!
> [ebuild N ] dev-util/cargo-0.30.0 USE="-debug -doc -libressl"
> ABI_X86="(64) -32 (-x32)"
> [ebuild N
On 11/17/2018 07:58 PM, Adam Carter wrote:
Do you have virtual/cargo installed?
Not presently.
I removed the following packages as part of troubleshooting.
dev-util/cargo virtual/cargo dev-lang/rust virtual/rust
I then (re)installed dev-lang/rust per Andrew U.'s recommendation.
Sorry poste
On Sun, Nov 18, 2018 at 1:55 PM Adam Carter wrote:
> On Sun, Nov 18, 2018 at 1:52 PM Grant Taylor <
> gtay...@gentoo.tnetconsulting.net> wrote:
>
>> On 11/17/2018 06:11 PM, Andrew Udvare wrote:
>> > Uninstall dev-util/cargo and emerge -1 dev-lang/rust. dev-lang/rust
>> > comes with Cargo.
>>
>> H
On Sun, Nov 18, 2018 at 1:52 PM Grant Taylor <
gtay...@gentoo.tnetconsulting.net> wrote:
> On 11/17/2018 06:11 PM, Andrew Udvare wrote:
> > Uninstall dev-util/cargo and emerge -1 dev-lang/rust. dev-lang/rust
> > comes with Cargo.
>
> Hum. That didn't solve the problem.
>
Do you have virtual/car
>
> > I also had to
> >
> > ln -s /usr/bin/cargo-1.30.1 /usr/bin/cargo
> >
> > To get things working, YMMV.
>
> The correct way is to run `eselect rust set 1`. There are other symlinks
> besides cargo.
>
>
That was already set for me, but i re-ran it, and atime on the symlink was
reset. Thanks.
On 11/17/2018 06:11 PM, Andrew Udvare wrote:
Uninstall dev-util/cargo and emerge -1 dev-lang/rust. dev-lang/rust
comes with Cargo.
Hum. That didn't solve the problem.
#[5828:root@alpha:~]# eselect rust list
Available Rust versions:
[1] rust-1.30.1 *
#[5829:root@alpha:~]# emerge -aDuN @wor
> On 2018-11-17, at 20:16, Adam Carter wrote:
>
> > On 2018-11-17, at 19:24, Grant Taylor
> > wrote:
> >
> > So, will someone help me fix this cargo / rust blockage so that I can
> > finish my @world emerge?
>
> Uninstall dev-util/cargo and emerge -1 dev-lang/rust. dev-lang/rust comes
> w
>
> > On 2018-11-17, at 19:24, Grant Taylor
> wrote:
> >
> > So, will someone help me fix this cargo / rust blockage so that I can
> finish my @world emerge?
>
> Uninstall dev-util/cargo and emerge -1 dev-lang/rust. dev-lang/rust comes
> with Cargo.
>
>
I also had to
ln -s /usr/bin/cargo-1.30.1
> On 2018-11-17, at 19:24, Grant Taylor
> wrote:
>
> So, will someone help me fix this cargo / rust blockage so that I can finish
> my @world emerge?
Uninstall dev-util/cargo and emerge -1 dev-lang/rust. dev-lang/rust comes with
Cargo.
--
Andrew Udvare
Hi,
Would someone please point me in the proper direction to start reading
what I need to do to resolve this problem?
[blocks B ] dev-util/cargo ("dev-util/cargo" is blocking
dev-lang/rust-1.30.1-r1)
* Error: The above package list contains packages which cannot be
* installed at the
gevisz wrote:
> чт, 4 окт. 2018 г. в 16:18, Jorge Ventura :
>>
> Hm, could you, please, describe your problem in a bit more details?
>
>
I wondered if they were trying to get list help,
gentoo-user+h...@lists.gentoo.org, when I first saw it. If so, maybe
that email address will help them, if they
чт, 4 окт. 2018 г. в 16:18, Jorge Ventura :
>
>
Hm, could you, please, describe your problem in a bit more details?
On venerdì 29 dicembre 2017 03:40:46 CET Daniel Frey wrote:
> On 12/28/17 12:36, Stefano Crocco wrote:
> > Hello to everyone,
> > I'm trying to install Gentoo on an Asus Transformer T101HA and there are
> > some issues I'd need help with.
> >
> > First of all, I must say that many things worked fa
On 12/28/17 12:36, Stefano Crocco wrote:
Hello to everyone,
I'm trying to install Gentoo on an Asus Transformer T101HA and there are some
issues I'd need help with.
First of all, I must say that many things worked fairly easily. I performed
the installation from a SysrescueCD USB stick where alm
Hello to everyone,
I'm trying to install Gentoo on an Asus Transformer T101HA and there are some
issues I'd need help with.
First of all, I must say that many things worked fairly easily. I performed
the installation from a SysrescueCD USB stick where almost everything,
including WiFi and touch
Am Mittwoch, 15. November 2017, 17:50:37 CET schrieb tu...@posteo.de:
> * Error: The above package list contains packages which cannot be
> * installed at the same time on the same system.
>
> (sys-libs/glibc-2.25-r9:2.2/2.2::gentoo, installed) pulled in by
>
> >=sys-libs/glibc-2.23[mult
On Wed, 15 Nov 2017 18:43:15 +0100, tu...@posteo.de wrote:
> /root>emerge -1 '>=sys-libs/glibc-2.26'
> Calculating dependencies... done!
> [ebuild U *] sys-libs/glibc- [2.25-r9] USE="-compile-locales%"
>
Why is it trying to install the version? Is that unmasked?
Are you running s
Well, that's yet another problem, this time it's `autofs` package
which depends on glibc having `rpc` USE flag. glibc 2.26 lost this
USE-flag, however. Hopefully you can workaround this by enabling
`libtirpc` USE-flag for `autofs` package.
So the steps should be now:
1. put `net-fs/autofs libtirp
On Wed, Nov 15, 2017 at 12:20 PM, wrote:
> On 11/15 06:04, Jan Chren (rindeal) wrote:
>> net-libs/libnsl-1.1.0-r1 is blocking sys-libs/glibc versions lower
>> than 2.26 and you have sys-libs/glibc-2.25 installed. So try
>> installing glibc-2.26 manually first and then libnsl.
>>
>> On 15 November
On 11/15 06:24, Jan Chren (rindeal) wrote:
> Oh, I missed that the current libnsl has a blocker as well. In that
> case try to do this:
>
> ```
> emerge -C libnsl
> emerge -1 ">=sys-libs/glibc-2.26"
> emerge -1 libnsl
> ```
>
> On 15 November 2017 at 18:20, wrote:
> > On 11/15 06:04, Jan Chren
Oh, I missed that the current libnsl has a blocker as well. In that
case try to do this:
```
emerge -C libnsl
emerge -1 ">=sys-libs/glibc-2.26"
emerge -1 libnsl
```
On 15 November 2017 at 18:20, wrote:
> On 11/15 06:04, Jan Chren (rindeal) wrote:
>> net-libs/libnsl-1.1.0-r1 is blocking sys-libs
On 11/15 06:04, Jan Chren (rindeal) wrote:
> net-libs/libnsl-1.1.0-r1 is blocking sys-libs/glibc versions lower
> than 2.26 and you have sys-libs/glibc-2.25 installed. So try
> installing glibc-2.26 manually first and then libnsl.
>
> On 15 November 2017 at 17:50, wrote:
> > Hi,
> >
> > From eme
net-libs/libnsl-1.1.0-r1 is blocking sys-libs/glibc versions lower
than 2.26 and you have sys-libs/glibc-2.25 installed. So try
installing glibc-2.26 manually first and then libnsl.
On 15 November 2017 at 17:50, wrote:
> Hi,
>
> From emerge I got this """info""":
>
>
>
> * Error: The above pack
Hi,
>From emerge I got this """info""":
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(sys-libs/glibc-2.25-r9:2.2/2.2::gentoo, installed) pulled in by
>=sys-libs/glibc-2.23[multilib?] (>=sys-libs/glibc-2.23) required
ser@lists.gentoo.org
Subject: Re: [gentoo-user] help securing system / remote unlock
On Mon, 6 Feb 2017 22:16:38 +, Simon Perfer wrote:
> Can't seem to find a tool that will generate an initramfs with support
> for ZFS, LUKS and Dropbear so that I can remotely unlock the system.
>
>
On Mon, 6 Feb 2017 22:16:38 +, Simon Perfer wrote:
> Can't seem to find a tool that will generate an initramfs with support
> for ZFS, LUKS and Dropbear so that I can remotely unlock the system.
>
> Ubuntu makes it very easy to enable Dropbear in their initramfs. I
> could have sworn I've don
Hi – I've successfully set up whole disk encryption by using LUKS and ZFS on
top of it. I can boot by unlocking the drive via some remote console.
Can't seem to find a tool that will generate an initramfs with support for ZFS,
LUKS and Dropbear so that I can remotely unlock the system.
Ubuntu
On September 6, 2016 10:17:53 PM GMT+02:00, Grant wrote:
>Hi, my site is being ravaged by an IP but dropping the IP via
>shorewall is seeming to have no effect. I'm using his IP from nginx
>logs. IP blocking in shorewall has always worked before. What could
>be happening?
>
>- Grant
Grant,
Wi
Hi, my site is being ravaged by an IP but dropping the IP via
shorewall is seeming to have no effect. I'm using his IP from nginx
logs. IP blocking in shorewall has always worked before. What could
be happening?
- Grant
On Thursday 25 Feb 2016 13:23:52 Alan McKinnon wrote:
> On 25/02/2016 03:05, allan gottlieb wrote:
> > On Wed, Feb 24 2016, Alan McKinnon wrote:
> >> A finite subset of this package.use file will let skype install,
> >> followed of course by
> >> emerge skype.
> >>
> >> I arrived at this list the
Both david and alan suggested global icu use flag. Specifically
On Thu, Feb 25 2016, David Haller wrote:
> Hello,
>
> On Wed, 24 Feb 2016, allan gottlieb wrote:
> [..]
>>dev-libs/libxml2:2
>>
>> (dev-libs/libxml2-2.9.2-r4:2/2::gentoo, ebuild scheduled for merge) pulled
>> in by
>>
>> dev-l
On 25/02/2016 03:05, allan gottlieb wrote:
On Wed, Feb 24 2016, Alan McKinnon wrote:
A finite subset of this package.use file will let skype install,
followed of course by
emerge skype.
I arrived at this list the long hard way, repeatedly running emerge and
adding stuffs still portage stopped
Hello,
On Wed, 24 Feb 2016, allan gottlieb wrote:
[..]
>dev-libs/libxml2:2
>
> (dev-libs/libxml2-2.9.2-r4:2/2::gentoo, ebuild scheduled for merge) pulled
> in by
>
> dev-libs/libxml2:2[!icu?,abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_
On Wed, Feb 24 2016, Alan McKinnon wrote:
> A finite subset of this package.use file will let skype install,
> followed of course by
> emerge skype.
>
> I arrived at this list the long hard way, repeatedly running emerge and
> adding stuffs still portage stopped it's whinging. The worst part is Qt
On Wed, Feb 24, 2016 at 3:30 PM, Alan McKinnon wrote:
>
> I agree with Ralf, a small VM with Windows or an Ubuntu/Mint/whatever
> appliance solely for use with skype is probably a better use of your
> time. It's a huge PITA to keep abi_x86_32 under control and not bloat,
> whereas a VM only needs
A finite subset of this package.use file will let skype install,
followed of course by
emerge skype.
I arrived at this list the long hard way, repeatedly running emerge and
adding stuffs still portage stopped it's whinging. The worst part is Qt
and X11 as skype is a Qt app and no longer bundles a
On Wed, Feb 24 2016, Ralf wrote:
> Hi,
>
> I hate those tons of abi_x86_32 packages as well.
>
> This is also not solving your slot conflict, but why not:
> - Use a Windows VM for Skype
> - Use a small Linux VM for Skype (e.g. Debian)
> and just redirect your webcam.
>
> In this way, you don't
Hi,
I hate those tons of abi_x86_32 packages as well.
This is also not solving your slot conflict, but why not:
- Use a Windows VM for Skype
- Use a small Linux VM for Skype (e.g. Debian)
and just redirect your webcam.
In this way, you don't mess up your system with 32 bit libraries. And,
of
Hi=)
Can't really help with 32bit conflicts, I gave up on it since other
unofficial packages got broken.
But you can try workaround with disabled abi_x86_32, put skype ebuild to
your local overlay and remove all abi_x86_32 related in it. And it still
can fail=)
Or you can give a try to web.skype.co
Unfortunately (see the end for the reason) I need to run skype. This
seems to be a mess to build.
I already
added it to package.accept_keywords
added about 100 entries to package.use (for abi_x86_32)
accepted the license
Now I have a slot conflict. Below the abbreviated output is the full
On 07/08/2015 08:26 PM, walt wrote:
I'm trying to debug a gtk+ app so I'm trying to learn some basic gtk+
and failing :(
Can anyone splain to me what these lines mean:
typedef enum
{
G_CONNECT_AFTER = 1 << 0,
G_CONNECT_SWAPPED = 1 << 1
} GConnectFlags;
In particular I don't u
In this context I believe it's a bit shift operator. So 1 << 0 is 1 and 1
<< 1 is 2.
As for the << operator in C++...
The operator appears in C++ as the bitshift operator too. However, C++
supports operator overloading. This means that for custom data types (I.e.
classes), one can define how cert
I'm trying to debug a gtk+ app so I'm trying to learn some basic gtk+
and failing :(
Can anyone splain to me what these lines mean:
typedef enum
{
G_CONNECT_AFTER = 1 << 0,
G_CONNECT_SWAPPED = 1 << 1
} GConnectFlags;
In particular I don't understand what the << operator is doing.
Am Sat, 13 Jun 2015 00:06:38 -0400
schrieb Valmor de Almeida :
[...]
> sys-fs/udev:0
>
> (sys-fs/udev-216:0/0::gentoo, ebuild scheduled for merge) conflicts with
> >=sys-fs/udev-208-r1:0/0[abi_x86_64(-),gudev(-)] required by
> (virtual/libgudev-215-r3:0/0::gentoo, installed)
>
>
>
> No
No I did not any messages. The bottom of the output was
=dev-haskell/text-0.2:0/0.11.3.1= required by
(dev-haskell/parsec-3.1.4:0/3.1.4::gentoo, installed)
>=dev-haskell/text-0.10:0/0.11.3.1= required by
(dev-haskell/blaze-markup-0.5.1.6:0/0.5.1.6::ge
Am Fri, 12 Jun 2015 02:09:11 -0400
schrieb Valmor de Almeida :
> Hello,
>
> After a recent portage update I get the list of conflicts below.
> Inputs on how to resolve them would be greatly appreciated.
>
> Thanks,
>
> --
> Valmor
>
>
>
> -> USE='-dso perl dbus xetex' emerge -vp --update --
Hello,
After a recent portage update I get the list of conflicts below.
Inputs on how to resolve them would be greatly appreciated.
Thanks,
--
Valmor
-> USE='-dso perl dbus xetex' emerge -vp --update --newuse --tree --deep
--with-bdeps=y @world
These are the packages that would be merged, i
I solved it setting a enviroment variable and compiling it with threads
use flag.
--
Henrique Lengler
https://gitorious.org/~henriqueleng
Hi,
I'm trying to setup privoxy on my gentoo. All I did is:
$ sudo emerge privoxy
$ /etc/init.d/privoxy start
* Starting privoxy ...
$ vimprobable2 http_proxy=”http://127.0.0.1:8118″
And anything is working. I opened the privoxy config page and it says to
me that privoxy is not running and as i
Hi All,
I am trying to create an ebuild for Egroupware 14.1. (released this month)
To find out the dependencies, I am going through the setup check and am stuck
with the following:
**
Checking PEAR pear.horde.org/Horde_Imap_Client (2.16.0) is installed: False
PEAR::Horde_Imap_Client is needed
1 - 100 of 607 matches
Mail list logo
