I have not used it, but this looks promising:
http://gwc.sourceforge.net/
k
On 2/4/07, Christoph Eckert <[EMAIL PROTECTED]> wrote:
> - what sound card would you advise ?
I use a prosumer USB soundcard connected to my notebook.
> - which open software(s) should I use to obtain a burnable fil
Richard Fish wrote:
> On 11/28/06, karlos <[EMAIL PROTECTED]> wrote:
>> I get:
>>
>> Xlib: extension "RANDR" missing on display ":0.0".
>>
>> what is necessesary in config to get this extension working? I have
>> libXrandr / randrproto / xrandr installed.
>
> It is a built-in extension (you should
hey..
I need some help to set up a remote ssh/vnc/ftp/www access to my
computer at home via dyndns.org.
I am using ddclient to get to my router (which works) but can login to
my machine behind the router (ssh for now, ftp and http later). The
router is configured so dmz works for my IP but as
Tero Grundström wrote:
On Sat, 1 Jul 2006, krgn wrote:
Hello,
I am looking for a programm that I can practice 10 finger typing for
gentoo/linux. Does anyone have a recommendation, or is there even one
in portage? Does it make sense what I would like to say?
I know only one - gtypist. It&#
Hello,
I am looking for a programm that I can practice 10 finger typing for
gentoo/linux. Does anyone have a recommendation, or is there even one in
portage? Does it make sense what I would like to say?
thanks,
Karsten
--
gentoo-user@gentoo.org mailing list
Bo Ørsted Andresen wrote:
On Sunday 25 June 2006 23:33, krgn wrote:
ok, I attached a file with the output of the command,
---
[nomerge ] media-video/nvidia-settings-1.0.20051122-r3
[ebuild N] media
Bo Ørsted Andresen wrote:
On Sunday 25 June 2006 23:08, krgn wrote:
thanks for your quick reply! I have double checked that I don't have
nvidia set in the VIDEO_CARDS section make.conf, so its a bit weird that
its pops up again. I also tried masking it, plus the older version of
xorg-s
I know this must have been asked a few times, but I need to quick and
can't search a lot for info on the net. I would like to remove, say KDE
and GNOME from a system with all the packages they come with, and would
like to find a cmd-line option to emerge that spits out the packages
depending on
Hi,
thanks for your quick reply! I have double checked that I don't have
nvidia set in the VIDEO_CARDS section make.conf, so its a bit weird that
its pops up again. I also tried masking it, plus the older version of
xorg-server (1.0.99), but the block still comes up.
any idea?
karsten
It m
hi,
I have a strange blocker on emerge -Dup world:
[blocks B ] >=x11-base/xorg-server-1.0.99 (is blocking
media-video/nvidia-glx-1.0.8762)
neither nvidia-glx nor nvidia-kernel is installed on my system and my
current version of xorg-server is already 1.1.0-r1. Does anyone know why
hey alex,
I used your instructions, and got a bit further yet there are still
issues that seem to be contradictory. First of all, a snippet from the/
./configure /process:
/
checking whether QTDIR environment variable is set... /usr/qt/3
checking for Qt library... qt-mt
checking for Qt library
hey,
I am trying to compile a program written in qt3 which apprently,
according to the author, fails because it being compiled using version 4
qmake. I checked and indeed qmake is from version 4, yet in my
environment, the QTDIR variable is pointing to /usr/qt/3. Now that both
confuses me and
Raymond Lewis Rebbeck wrote:
On Sunday, 18 June 2006 6:50, krgn wrote:
hello,
I have a few questions on how to basically access a specific machine in
a network from the web. I have registered with dyndns.org and got
ddclient running to provide the ip address, but the only thing I can now
hello,
I have a few questions on how to basically access a specific machine in
a network from the web. I have registered with dyndns.org and got
ddclient running to provide the ip address, but the only thing I can now
connect to is my network router ;) which is pretty useless. How would it
be
have a look at tomboy, sort of similar I would say.
http://www.beatniksoftware.com/tomboy/
A friend just showed me voodoopad (http://flyingmeat.com/voodoopad/)
and I was
blown away. It's a bit like wikiwikiweb, but it's on your local
computer, not
through a server/browser setup.
Surely such a
I don't know, a good start might be checking your rc-scripts, I mean
which ones are turned on. switching off the non-mandatory ones might be
a start. then, what window-manager are you using? could it, or some
related sft be the reason? you should start from as little 'extra'
(i.e. wm, daemons.
hi,
I wonder how I can switch to the new gcc-4.1.1 version from the old one.
on gcc --version I get 3.4.something so I assume that I am stll using
the old profile.
what command do I have to use to get gcc to use 4.1.1?
thanks,
Karsten
--
gentoo-user@gentoo.org mailing list
Hello,
I would like to be able to have different kernel versions installed
(i.e. rt-sources, ck-sources, suspend2-sources) and easily manage the
startup scripts, modules, even configuration flies (xorg.conf) for each
kernel. I am aware about initrd, but wonder whether it is possible to
use it
I have a Satellite P10 probably slightly different from yours but maybe
this modeline works. I have a widescreen too.. and get the 1280x800
working normally.
[EMAIL PROTECTED] ~ $ cat /etc/X11/xorg.conf|grep ModeLine
ModeLine "1280x800_60" 81.5 1280 1344 1480 1680 800 801
804 828 -h
oh.. jusrt tried it out and it seems to have worked! Thanks!
Will this possibly crop up in future as well?
Karsten
--
gentoo-user@gentoo.org mailing list
hi
I have a question concerning my modular X installation. I did this
according to the gentoo guide here
http://www.gentoo.org/proj/en/desktop/x/x11/modular-x-howto.xml.
now, I have synced again, and a lot of blocks are coming up and I am not
sure really how to solve this. These are the blocks. ho
> Are you sure /etc/resolv.conf is O.K.
absolutely.
It just contains:
nameserver 192.168.1.1
I found the solution (for the liveCD) here, but still, after boot these
options do not do the job anymore:
http://skreak.com/m6805/
I don't know, but I though there must have been some improvem
I am in the process of installing on another computer at the moment
which has this via_rhine network interface. I will not start normally
without a solution I have found on the net. At least this worked for the
liveCD installation stage. It is issuing acpi=off and noapic to the
kernel.
Now it is b
hello,
I have been looking into compiling a 2.6 kernel for an older Pentium III
with latest unstable ck-sources and found a few really reallly weird
things here that worried me a bit. For example, when I go to
Device Drivers -->
USB-support-->
actually nothing shows up except for USB-gadg
I have seen and tried the twinview tutorial, thought that was not the
last word tho..
I do have tried to use X with this configuration and up to now there
were no problems really when I had no 'second' monitor.
K
On Wed, 2006-02-15 at 23:09 +0100, Christoph Eckert wrote:
> > anyways the quick answ
On Wed, 2006-02-15 at 22:11 +0100, Christoph Eckert wrote:
> > Does anyone see what's wrong in my xorg.conf? I have attached it this
> > mail.
>
> when I understood correctly, there's nothing you can do.
>
> * The TwinView Option is special for NVidia cards
> * This setting has nothing to do with
hey,
I have tried to configure TwinView for my laptop and whatever comes
(projector, crt etc..) and everything seems good except, and that is a
bit annoying, that the desktop (xfce-panel..) is on the wrong screen,
i.e. not on my Laptop display but on the second one. That is a bit shit,
since I alw
hi,
Has anyone a clue why neither beagle-config nor beagle-settings will
allow me to index /usr/share/doc for instance?
[EMAIL PROTECTED] ~ $ beagle-config indexing AddRoot /usr/share/doc
Debug: Loading Beagle.Util.Conf+IndexingConfig from indexing.xml
Error: Could not load configuration from i
> Symbol: BLK_DEV_LOOP [=y]
> Prompt: Loopback device support
> Defined at drivers/block/Kconfig:261
> Location:
> -> Device Drivers
> -> Block devices
>
> mount -o loop
ok, installed it as module and its there...
RockHead src # ls /dev/|grep loop
loop
loop0
loop1
loop2
loop3
loo
hello,
I would like to be able to mount a *.bin image locally without burning
it beforehand, but I don't understand atm how to create a /dev/loop
device node and make it work so I can mount it. I don't think I need
encryption for it. Which Kernel options are necessary (could not find
anything abo
ebuild...
Thanks for the help!
KArsten
On Sat, 2006-01-14 at 21:34 -0700, Richard Fish wrote:
> On 1/14/06, krgn <[EMAIL PROTECTED]> wrote:
> >
> > RockHead karlos # equery belongs usr/bin/audemo
> > [ Searching for file(s) usr/bin/audemo in *... ]
> > media
funtional?
KArsten
On Fri, 2006-01-13 at 19:21 -0700, Richard Fish wrote:
> On 1/13/06, krgn <[EMAIL PROTECTED]> wrote:
> > :)
> > yep
>
> Anddid the packages rebuild?
>
> If so then possibly these files are orphans. You can check with:
>
&g
:)
yep
On Fri, 2006-01-13 at 18:46 -0700, Richard Fish wrote:
> On 1/13/06, krgn <[EMAIL PROTECTED]> wrote:
> > What now?
>
> I assume you repeated the revdep-rebuild? Without the "-p"?
>
> -Richard
>
--
gentoo-user@gentoo.org mailing list
On Fri, 2006-01-13 at 17:44 -0500, Kenton Groombridge wrote:
> krgn wrote:
> > I have just installed modular X on my box and try to finalize it, but a
> > few things are broke now and have to get rebuild.
> >
> > revdep-rebuild -p :::spits this out
>
Hi,
I have just installed modular X on my box and try to finalize it, but a
few things are broke now and have to get rebuild.
revdep-rebuild -p :::spits this out
Checking dynamic linking consistency...
broken /usr/bin/audemo (requires libXaw.so.8)
broken /usr/bin/auedit (requires
Hi all,
I was playing with the thought of installing x11 7.0 (that's modular X?)
lately to try out a few Extensions and I wondered which driver to choose
for my Nvidia GeforceGo card. Can I still continue to use nvidia-kernel
and nvidia-glx?
How is it actually with Y-windows, most of the apps and
Hi,
Beagle seems to throw this error on emerge, I don't have a clue at all
why.
I used the following:
beagle-0.0.12-r1.ebuild from the bug-site
mono-1.1.8.3
error CS0006: Cannot find assembly `BeagleWebServicesBackEnd.dll'
Log:
error CS0006: Cannot find assembly `BeagleWebServicesFrontEnd.dll'
Hello,
Has anyone experience with the Alsa RTC-module and how install it? My
problem is only how apply the diff-files to the kernel and I would like
to know how to do it. Just how to generally do that sort of thing.
Can anyone give me a quick tipp? Would it make a SIGNIFICANT difference
to the no
38 matches
Mail list logo
