On 9/19/19 7:30 PM, Cy Schubert wrote:
> In message om>
> , Johannes Lundberg writes:
>> --0875960592f275a3
>> Content-Type: text/plain; charset="UTF-8"
>> Content-Transfer-Encoding: quoted-printable
>>
>> Tested today with bgscan added. Didn=E2=80=99t connect to home network unti=
>
In message
, Johannes Lundberg writes:
> --0875960592f275a3
> Content-Type: text/plain; charset="UTF-8"
> Content-Transfer-Encoding: quoted-printable
>
> Tested today with bgscan added. Didn=E2=80=99t connect to home network unti=
> l I
> manually run ifconfig wlan0 scan.
> Again, this
Tested today with bgscan added. Didn’t connect to home network until I
manually run ifconfig wlan0 scan.
Again, this is with failover lagg.
It did however realize I wasn’t at the office anymore and the ssid field
was empty in ifconfig output. Sometimes it stays the same long after I
leave the netw
In message <7938e5fa-67da-35fa-10d0-ee3004438...@freebsd.org>, Johannes
Lundber
g writes:
>
> On 9/19/19 3:06 PM, Adrian Chadd wrote:
> > So roaming in ifconfig/net80211 is what's set to manual.
> >
> > wpa_supplicant right now does RSSI threshold based roaming. All of the
> > roaming and network
I've no idea, bgscan is broken with atheros NICs because the driver still
doesn't do background scan without dropping frames :(
(one of many thing I'd love to fix, but life/time.)
please do experiment though! I think wpa_supplicant's roaming logic would
benefit from a lot more work.
-adrian
On 9/19/19 3:06 PM, Adrian Chadd wrote:
> So roaming in ifconfig/net80211 is what's set to manual.
>
> wpa_supplicant right now does RSSI threshold based roaming. All of the
> roaming and network preferences when wpa_supplicant is running is done
> in wpa_supplicant. That's where you have to look.
So roaming in ifconfig/net80211 is what's set to manual.
wpa_supplicant right now does RSSI threshold based roaming. All of the
roaming and network preferences when wpa_supplicant is running is done in
wpa_supplicant. That's where you have to look. Ideally wpa_supplicant would
be triggering bgscan
On September 19, 2019 8:20:07 AM PDT, Adrian Chadd
wrote:
>Roaming is done in wpa_supplicant when it's running.That's where the
>smarts
>need to be. :(
>
>
>
>-adrian
>
>
>On Thu, 19 Sep 2019 at 05:44, Bjoern A. Zeeb
>
>wrote:
>
>> On 19 Sep 2019, at 12:28, Tom Jones wrote:
>>
>> Hi,
>>
>> freebs
Roaming is done in wpa_supplicant when it's running.That's where the smarts
need to be. :(
-adrian
On Thu, 19 Sep 2019 at 05:44, Bjoern A. Zeeb
wrote:
> On 19 Sep 2019, at 12:28, Tom Jones wrote:
>
> Hi,
>
> freebsd-wireless might be a better list for all this ..
>
>
> > On Tue, Sep 17, 2019
On 19 Sep 2019, at 12:28, Tom Jones wrote:
Hi,
freebsd-wireless might be a better list for all this ..
On Tue, Sep 17, 2019 at 04:36:28PM +, Poul-Henning Kamp wrote:
In message <707bcd3f-fa6b-82eb-fa8f-09c4b800f...@freebsd.org>,
Johannes Lundber
g writes:
For a long time now
On Tue, Sep 17, 2019 at 04:36:28PM +, Poul-Henning Kamp wrote:
>
> In message <707bcd3f-fa6b-82eb-fa8f-09c4b800f...@freebsd.org>, Johannes
> Lundber
> g writes:
>
> >For a long time now I have had this problem with iwm and wlan0. Whenever
> >I move between work and home it won't reco
In message <707bcd3f-fa6b-82eb-fa8f-09c4b800f...@freebsd.org>, Johannes Lundber
g writes:
>For a long time now I have had this problem with iwm and wlan0. Whenever
>I move between work and home it won't reconnect automatically and I have
>to do wlan0 scan manually for it to pick up the di
Thanks, Andriy.
Indeed, this patch fixed my issue.
Hiro
On Tue, 07 Jun 2016 15:54:36 +0300
"Andriy Voskoboinyk" wrote:
> Tue, 07 Jun 2016 07:42:48 +0300 було написано Adrian Chadd
> :
>
> Hi,
>
> the attached patch should fix this issue
> (no idea if it can be fixed in a better way...)
>
Tue, 07 Jun 2016 07:42:48 +0300 було написано Adrian Chadd
:
Hi,
the attached patch should fix this issue
(no idea if it can be fixed in a better way...)
Hi,
this is a recent change to the regulatory handling. I've emailed
Andriy who wrote the code. :)
Andriy, any ideas?
-adrian
On 6
Hi,
this is a recent change to the regulatory handling. I've emailed
Andriy who wrote the code. :)
Andriy, any ideas?
-adrian
On 6 June 2016 at 20:15, Yoshihiro Ota wrote:
> Hi,
>
> I started getting the following error when I tried to bring up wireless
> connection since June 3rd. I had
Adrian Chadd wrote:
> Right, you need to create the interface:
>
> ifconfig wlan0 create wlandev iwn0
>
> then run wpa_spuplicant
>
> (or do it all in /etc/rc.conf .. :)
That seems to work. There seems to be something configured wrong for
wpa_supplicant but WLAN does react.
Thank you for a
On 3/1/16, Carsten Kunze wrote:
> Conrad Meyer wrote:
>
>> "[1] iwn0: mem 0xf7b0-0xf7b01fff
>> irq 18 at device 0.0 on pci3" is fine; "module iwn already present!"
>> is fine.
>>
>> What makes you say it isn't recognized or doesn't work?
>
> ifconfig iwn0 says "interface iwn0 does not e
Conrad Meyer wrote:
> "[1] iwn0: mem 0xf7b0-0xf7b01fff
> irq 18 at device 0.0 on pci3" is fine; "module iwn already present!"
> is fine.
>
> What makes you say it isn't recognized or doesn't work?
ifconfig iwn0 says "interface iwn0 does not exist". Also starting
wpa_supplicant doesn
Right, you need to create the interface:
ifconfig wlan0 create wlandev iwn0
then run wpa_spuplicant
(or do it all in /etc/rc.conf .. :)
-a
On 1 March 2016 at 14:13, Carsten Kunze wrote:
> Adrian Chadd wrote:
>
>> sysctl net.wlan.devices
>>
>> iwn0 no longer shows up in ifconfig -a .
>>
>>
Adrian Chadd wrote:
> sysctl net.wlan.devices
>
> iwn0 no longer shows up in ifconfig -a .
>
>
> -a
Ok, "sysctl -a|grep iwn" gives quite some output.
Actually I tried to start wpa_supplicant, but WLAN didn't react. Then--just
for testing--I wrote "ifconfig iwn0 up", where ifconfig reported
sysctl net.wlan.devices
iwn0 no longer shows up in ifconfig -a .
-a
On 1 March 2016 at 13:42, Conrad Meyer wrote:
> "[1] iwn0: mem 0xf7b0-0xf7b01fff
> irq 18 at device 0.0 on pci3" is fine; "module iwn already present!"
> is fine.
>
> What makes you say it isn't recognized or doesn't wor
"[1] iwn0: mem 0xf7b0-0xf7b01fff
irq 18 at device 0.0 on pci3" is fine; "module iwn already present!"
is fine.
What makes you say it isn't recognized or doesn't work?
On Tue, Mar 1, 2016 at 1:01 PM, Carsten Kunze wrote:
> Conrad Meyer wrote:
>
>> kldload iwn6000fw, iwn6000g2afw, iwn6000g2b
Conrad Meyer wrote:
> kldload iwn6000fw, iwn6000g2afw, iwn6000g2bfw.
This or edit loader.conf doesn't help, all these things had already been in the
kernel. dmesg stays the same.
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/
kldload iwn6000fw, iwn6000g2afw, iwn6000g2bfw.
On Tue, Mar 1, 2016 at 12:48 PM, Carsten Kunze wrote:
> Larry Rosenman wrote:
>
>> Did you load the iwn firmware?
>
> How do I do this?
>
> I put "if_iwn_load="YES"" into /boot/loader.conf, now I get
> "module iwn already present!" in dmesg...
> ___
On 2016-03-01 14:48, Carsten Kunze wrote:
Larry Rosenman wrote:
Did you load the iwn firmware?
How do I do this?
I put "if_iwn_load="YES"" into /boot/loader.conf, now I get
"module iwn already present!" in dmesg...
___
freebsd-current@freebsd.org
Larry Rosenman wrote:
> Did you load the iwn firmware?
How do I do this?
I put "if_iwn_load="YES"" into /boot/loader.conf, now I get
"module iwn already present!" in dmesg...
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailm
On 2016-03-01 12:23, Carsten Kunze wrote:
Joe Nosay wrote:
Is the card removable? If so, have you tried plugging in one that
would
have the driver already included with the base - so to speak - system?
Have
you tried the card in another computer/laptop?
It is an integrated card. Theoretic
Joe Nosay wrote:
> Is the card removable? If so, have you tried plugging in one that would
> have the driver already included with the base - so to speak - system? Have
> you tried the card in another computer/laptop?
It is an integrated card. Theoretical it is removeable, but this is by design
Is the card removable? If so, have you tried plugging in one that would
have the driver already included with the base - so to speak - system? Have
you tried the card in another computer/laptop?
On Tue, Mar 1, 2016 at 10:47 AM, Carsten Kunze
wrote:
> Hello,
>
> the WLAN hardware of my Dell E6540
On Saturday 01 January 2011 19:47:21 you wrote:
> On Mon, Dec 27, 2010 at 02:05:25AM +0100, Bernhard Schmidt wrote:
> > On Monday 27 December 2010 01:32:56 Steve Kargl wrote:
> > > On Sun, Dec 26, 2010 at 11:25:05PM +0100, Bernhard Schmidt wrote:
> > [ .. ]
> > If you can get debug output while the
On Mon, Dec 27, 2010 at 02:05:25AM +0100, Bernhard Schmidt wrote:
> On Monday 27 December 2010 01:32:56 Steve Kargl wrote:
> > On Sun, Dec 26, 2010 at 11:25:05PM +0100, Bernhard Schmidt wrote:
> > > How about providing the info I asked for last time? Now that you have
> > > build the necessary opti
On Monday 27 December 2010 01:32:56 Steve Kargl wrote:
> On Sun, Dec 26, 2010 at 11:25:05PM +0100, Bernhard Schmidt wrote:
> > How about providing the info I asked for last time? Now that you have
> > build the necessary options into the kernel you should be able to run
> > with wlandebug 0xfff
On Sun, Dec 26, 2010 at 11:25:05PM +0100, Bernhard Schmidt wrote:
>
> How about providing the info I asked for last time? Now that you have
> build the necessary options into the kernel you should be able to run
> with wlandebug 0x enabled.
Perhaps, I got busy with real life work, and per
On Sunday 26 December 2010 22:39:58 Steve Kargl wrote:
> On Sun, Dec 26, 2010 at 04:43:48PM -0500, Etienne Robillard wrote:
> > On 26/12/10 02:55 PM, Steve Kargl wrote:
> > > First reported here,
> > >
> > > http://lists.freebsd.org/pipermail/freebsd-current/2010-December/021664
> > > .html
> > >
On Sun, Dec 26, 2010 at 04:43:48PM -0500, Etienne Robillard wrote:
> On 26/12/10 02:55 PM, Steve Kargl wrote:
> > First reported here,
> >
> > http://lists.freebsd.org/pipermail/freebsd-current/2010-December/021664.html
> >
> > I now see a never ending spew in /var/log/messages of
> >
> > laptop:ka
On 26/12/10 02:55 PM, Steve Kargl wrote:
> First reported here,
>
> http://lists.freebsd.org/pipermail/freebsd-current/2010-December/021664.html
>
> I now see a never ending spew in /var/log/messages of
>
> laptop:kargl[232] tail /var/log/messages
> Dec 26 07:41:12 laptop kernel: wlan0: link state
> Date: Thu, 02 Dec 2010 11:41:46 +0700
> From: Veniamin Gvozdikov
> Sender: owner-freebsd-curr...@freebsd.org
>
> Hi everybody!
> I have problem with my access point with freebsd after update of 7.3 to
> 8.1. I can't connect to AP. AP has auto change channel (
> http://fbsd.zlonet.ru/temp/wifi-p
On Thu, 3 Jul 2003, Oliver Brandmueller wrote:
OB>Hi.
OB>
OB>On Thu, Jul 03, 2003 at 01:39:19PM +0200, Harti Brandt wrote:
OB>> Jul 3 09:18:29 harti kernel: wi0: Lucent Firmware: Station (7.52.1)
OB>
OB>Well, I'm still seeing problems with my Lucent Card on -CURRENT (there
OB>were postings here a
Hi.
On Thu, Jul 03, 2003 at 01:39:19PM +0200, Harti Brandt wrote:
> Jul 3 09:18:29 harti kernel: wi0: Lucent Firmware: Station (7.52.1)
Well, I'm still seeing problems with my Lucent Card on -CURRENT (there
were postings here about that earlier, but Ican't provide details at the
moment as I do
On Thu, 3 Jul 2003, M. Warner Losh wrote:
MWL>In message: <[EMAIL PROTECTED]>
MWL>Harti Brandt <[EMAIL PROTECTED]> writes:
MWL>: my "Avaya Wireless PC Card" (actually seems to be a Lucent) stopped to
MWL>: work in my laptop as I updated the kernel today. It now says "pcic0: Card
MWL>:
In message: <[EMAIL PROTECTED]>
Harti Brandt <[EMAIL PROTECTED]> writes:
: my "Avaya Wireless PC Card" (actually seems to be a Lucent) stopped to
: work in my laptop as I updated the kernel today. It now says "pcic0: Card
: type unrecognized by bridge is unsupported.". What does this me
In message: <[EMAIL PROTECTED]>
Gerald Mixa <[EMAIL PROTECTED]> writes:
: does anybody know wether FreeBSD supports PCMCIA cards for wireless
: lan based on 802.11g (54MBit/s) standard?
Nope.
Warner
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in
At 12:25 PM +1030 2003/02/24, Daniel O'Connor wrote:
802.11g isn't a final standard yet either (note no WiFi logo on 11g
stuff)
WiFi waffled. There probably won't be any kind of a WiFi logo on
11g equipment. Or 11a, for that matter. They're too beholden to
corporate interests, and I don't
On Mon, 2003-02-24 at 07:27, Gerald Mixa wrote:
> does anybody know wether FreeBSD supports PCMCIA cards for wireless lan based
> on 802.11g (54MBit/s) standard?
Nope..
802.11g isn't a final standard yet either (note no WiFi logo on 11g
stuff)
Personally I'd wait a bit until the standard is fin
On Fri, Nov 22, 2002 at 07:41:26PM -0700, M. Warner Losh wrote:
> In message: <[EMAIL PROTECTED]>
> Christian Brueffer <[EMAIL PROTECTED]> writes:
> : Hi,
> :
> : just installed DP2 on my IBM Thinkpad R32 and updated to the latest
> : -CURRENT.
> : My wlan device (Prism 2.5, internal,
In message: <[EMAIL PROTECTED]>
Christian Brueffer <[EMAIL PROTECTED]> writes:
: Hi,
:
: just installed DP2 on my IBM Thinkpad R32 and updated to the latest
: -CURRENT.
: My wlan device (Prism 2.5, internal, no pccard) fails at bootup:
:
: wi0: mem 0xf800-0xf8000fff irq 11 at dev
46 matches
Mail list logo
