On Fri, Nov 22, 2002 at 07:41:26PM -0700, M. Warner Losh wrote: > In message: <[EMAIL PROTECTED]> > Christian Brueffer <[EMAIL PROTECTED]> writes: > : Hi, > : > : just installed DP2 on my IBM Thinkpad R32 and updated to the latest > : -CURRENT. > : My wlan device (Prism 2.5, internal, no pccard) fails at bootup: > : > : wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff irq 11 at device 7.0 on pci2 > : wi0: No Mem space on prism2.5? > : device_probe_and_attach: wi0 attach returned 6 > : > : Used to work fine with 4.7-STABLE. > : > : Any ideas? > > Nope. More details? > > Warner >
Here's the dmesg.boot and my kernel config. What else could be useful? - Christian -- http://www.unixpages.org [EMAIL PROTECTED] GPG Pub-Key : www.unixpages.org/cbrueffer.asc GPG Fingerprint: A5C8 2099 19FF AACA F41B B29B 6C76 178C A0ED 982D GPG Key ID : 0xA0ED982D
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sat Nov 23 00:57:35 CET 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/FANGORN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0570000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05700a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1599827344 Hz
CPU: Pentium 4 (1599.83-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 267845632 (255 MB)
avail memory = 254324736 (242 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-1M > on motherboard
Using $PIR table, 10 entries at 0xc00fdef0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_tz1: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.1
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.2
\\_SB_.LNKH irq 0: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.3
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.1
---- before setting priority for links ------------
\\_SB_.LNKH:
interrupts: 3 4 5 6 7 9 10 11
penalty: 1110 1110 110 1110 1110 110 110 610
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.LNKH:
interrupts: 3 4 5 6 7 9 10 11
penalty: 1110 1110 110 1110 1110 110 110 610
references: 1
priority: 672
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.1
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.2
\\_SB_.LNKH irq 10: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.3
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at
device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at
device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at
device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
---- initial configuration ------------------------
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.9.0
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.3.0
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.8.0
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.7.0
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.7.1
---- before setting priority for links ------------
\\_SB_.LNKF:
interrupts: 3 4 5 6 7 9 10 11
penalty: 1220 1220 220 1220 1220 220 320 1320
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.LNKF:
interrupts: 3 4 5 6 7 9 10 11
penalty: 1220 1220 220 1220 1220 220 320 1320
references: 1
priority: 870
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.9.0
\\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.3.0
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.8.0
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.7.0
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.7.1
pci2: <ACPI PCI bus> on pcib2
wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff irq 11 at device 7.0 on pci2
wi0: No Mem space on prism2.5?
device_probe_and_attach: wi0 attach returned 6
fxp0: <Intel Pro/100 Ethernet> port 0x8000-0x803f mem 0xd0200000-0xd0200fff irq 11 at
device 8.0 on pci2
fxp0: Ethernet address 00:00:e2:8b:c8:5a
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: <TI1410 PCI-CardBus Bridge> irq 11 at device 9.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at device 31.5 on
pci0
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0:fake" locked from
/usr/src/sys/dev/sound/pcm/channel.c:677
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0:fake" locked from
/usr/src/sys/dev/sound/pcm/channel.c:677
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0:fake" locked from
/usr/src/sys/dev/sound/pcm/channel.c:677
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0:fake" locked from
/usr/src/sys/dev/sound/pcm/channel.c:677
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:134
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0:play:0" locked from
/usr/src/sys/dev/sound/pcm/channel.c:677
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0:play:0" locked from
/usr/src/sys/dev/sound/pcm/channel.c:677
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0:play:0" locked from
/usr/src/sys/dev/sound/pcm/channel.c:677
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0:play:0" locked from
/usr/src/sys/dev/sound/pcm/channel.c:677
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0:record:0" locked from
/usr/src/sys/dev/sound/pcm/channel.c:677
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0:record:0" locked from
/usr/src/sys/dev/sound/pcm/channel.c:677
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0:record:0" locked from
/usr/src/sys/dev/sound/pcm/channel.c:677
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0:record:0" locked from
/usr/src/sys/dev/sound/pcm/channel.c:677
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5
irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 8250 or not responding
ppc0 port 0x3bc-0x3c3 irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio1 port 0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
orm0: <Option ROMs> at iomem
0xe0000-0xeffff,0xdc000-0xdffff,0xd0000-0xd17ff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.29 initialized. Default = pass all, Logging = enabled
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: 19077MB <IC25N020ATCS04-0> [41344/15/63] at ata0-master UDMA100
acd0: DVD-ROM <HL-DT-STDVD-ROM GDR8081N> at ata1-master PIO4
pass0 at ata1 bus 0 target 0 lun 0
pass0: <HL-DT-ST DVD-ROM GDR8081N 0012> Removable CD-ROM SCSI-0 device
pass0: 16.000MB/s transfers
Mounting root from ufs:/dev/ad0s1a
machine i386
cpu I686_CPU
ident GENERIC
maxusers 0
options CPU_ENABLE_SSE
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
# Debugging for use in -current
options DDB #Enable the kernel debugger
options INVARIANTS #Enable calls of extra sanity checking
options INVARIANT_SUPPORT #Extra sanity checks of internal structures,
required by INVARIANTS
options WITNESS #Enable checks to detect deadlocks and cycles
options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
device isa
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
device atapicam
options ATA_STATIC_ID #Static device numbering
# SCSI peripherals
device scbus # SCSI bus (required)
device pass # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
# Wireless NIC cards
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
# IPFilter
options IPFILTER
options IPFILTER_LOG
# IPsec options
options IPSEC
options IPSEC_ESP
options IPSEC_DEBUG
# GEOM
options GEOM_AES
options GEOM_BDE
options GEOM_BSD
options GEOM_MBR
# MAC
options MAC
options MAC_BIBA
options MAC_BSDEXTENDED
# Random stuff
device pcm
device radeondrm
msg47288/pgp00000.pgp
Description: PGP signature
