Public bug reported:
If one installs udisks2 without suggested packages, journalctl will show
following errors after boot:
udisksd[1675]: failed to load module mdraid: libbd_mdraid.so.2: cannot open
shared object file: No such file or directory
udisksd[1675]: Failed to load the 'mdraid' libblock
Public bug reported:
pacmd dump | grep mute
The "set-source-mute" for my mic should say "no" when my mic is not
muted but it always says "yes" nowadays. This used to work earlier.
Broken version:
$ apt policy pulseaudio-utils
pulseaudio-utils:
Installed: 1:15.99.1+dfsg1-1ubuntu2.1
Candidate:
Public bug reported:
Steps to reproduce:
(1) Open terminal
(2) Run command
systemd-inhibit --what=idle:sleep --mode=block sleep 1h
(3) Wait
Expected results:
The screensaver or system sleep (S3) shouldn't activate within an hour.
Actual results:
Screensaver activates after the default
OK, I agree that this is not a security problem but UI issue only.
However, note that the UI says "Public key" and before that "Key
algorithm: RSA". As such, the public key should not have any extra bytes
at the start or at the end, just the public RSA 2048 bit key as is (as
desribed by "Key Algor
The NVIDIA GeForce GT 330M device has vendor id 0x10de and device id
0x0a29 and revision 0x00a2. ROM (/firmware) version is listed as "3560".
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-nouveau in Ubuntu.
https://bu
According to Apple Mac OS X info this hardware is as follows:
MacBook Pro (15-inch, Mid 2010)
CPU: 2.53 GHz Intel Core i5
RAM: 4 GB 1067 MHz DDR3
GPU: Intel HD Graphics, 288 MB
The hardware *also* has NVIDIA GeForce GT 330M connected (according to
OS X self-diagnostics) via 16x PCIe and it has 25
Here's the full journalctl log for livecd debugging session I reported
above.
It appears that nautilus was totally hanging because I failed to ever
open any file manager windows even after waiting for a long time.
Firefox did eventually start and started to work until I tried to open
file picker t
Public bug reported:
I tried to use nightly build of Ubuntu 22.04 (jammy) on an old MacBook
Pro and if I start with failsafe graphics everything seems to work
really well. However, if I boot with default livecd configuration the
GPU will hang when I try to launch Firefox.
According to journalctl
Public bug reported:
nm-applet emits errors to X session error log continuously. Here's
summary from my log (with timestamps removed with perl):
$ grep nm-applet .xsession-errors | perl -npe 's/\*\*: \d\d:\d\d:\d\d.\d\d\d:
//' | sort | uniq -c
736 (nm-applet:2575): Gtk-CRITICAL gtk_widget_de
Public bug reported:
File /usr/bin/start-pulseaudio-x11 ALWAYS loads module module-x11-bell
and uploads audio sample for Pulseaudio if the file
/usr/share/sounds/ubuntu/stereo/bell.ogg EXISTS in the filesystem.
I have configured only visual bell for everything and therefore any part
of the system
Public bug reported:
Installing libvirt-manager results in account libvirt-qemu being
created. This user has config in /etc/passwd like follows:
libvirt-qemu:x:64055:125:Libvirt
Qemu,,,:/var/lib/libvirt:/usr/sbin/nologin
The "nologin" should be pretty clear signal that this account is not
usable
*** This bug is a duplicate of bug 1871794 ***
https://bugs.launchpad.net/bugs/1871794
Same issue here with Bose QC35 II and Thinkpad X1 Extreme (2nd gen).
Audio profile works just fine, but headset does not play any sound and the
microphone does not get any input. It was like this already in
It seems to me that fix
https://gitlab.freedesktop.org/xorg/xserver/-/commit/cfc5e5040c934 is
the correct one. Is it possible to reproduce the crash with that one
patch applied even without all the other proposed fixes?
--
You received this bug notification because you are a member of Desktop
Pac
Any updates? The diagnosis in comment #10 seems to make sense. This has
been a problem since 2011 and I still see the same issue on Ubuntu 16.04
LTS with latests patches.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to upower in Ubuntu.
h
Additional info:
If I run
$ xrandr --dpi 104
then xdpyinfo will display correct dimensions. However, xrandr keeps displaying
the incorrect physical dimensions.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to x11-xserver-utils in Ubuntu.
Possible problem caused by incorrect physical dimensions:
The default mouse cursor is huge (e.g. on desktop). However, most applications
have normal sized cursor while the cursor hovers above the application.
--
You received this bug notification because you are a member of Desktop
Packages, whi
Does anybody care about lightdm bugs? I'm still seeing this issue but I
haven't found a way to debug it. Is there some environment variable or
some other method that can make all g_debug() messages visible from
lightdm? Currently no log seems to contain any of the g_debug() messages
in the lightdm
Public bug reported:
I have monitor LG 43UD79-B and xrandr cannot correctly detect the
dimensions of the monitor:
$ xrandr
Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767
DVI-D-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted
Public bug reported:
I have a BGR display so I really would like to have BGR subpixel
rendering. I'm having major trouble getting fc-match to emit correct
info.
$ fc-match -v | grep -E 'rgba|lcdfilter|antialias|hintstyle|dpi'
antialias: True(w)
hintstyle: 2(i)(w)
dpi: 75(f
Still broken with MATE desktop on Ubuntu 18.04.2 LTS. If I run mate-
power-preferences and select ON AC Power - Put computer to sleep when
inactive for: [never] the computer still automatically sleeps (enters
S3) after 20 minutes.
$ grep -C1 sleep-inactive-ac-timeout
/usr/share/glib-2.0/schemas/1
The same bug has also been for at least 2 years present in the Linux
Mint Cinnamon, which is based on Gnome.
More information:
https://bugreports.qt.io/browse/QTBUG-75312
https://bugreports.qt.io/browse/QTBUG-71671
https://github.com/linuxmint/cinnamon/issues/8546
** Bug watch added: github.com/
This bug is still relevant for Bionic. Any info about possible backport?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to glib2.0 in Ubuntu.
https://bugs.launchpad.net/bugs/1691908
Title:
fstab binds appear as mounts (x-gvfs-hide is bei
Bug confirmed with three computers, each one using Ubuntu 18.04. Webcam
works (tested with Camorama) but Cheese can't detect it.
>From command line:
(cheese:13203): Gtk-WARNING **: 21:16:31.115: Theme parsing error:
cheese.css:7:35: The style property GtkScrollbar:min-slider-length is
depreca
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cheese in Ubuntu.
https://bugs.launchpad.net/bugs/1778555
Title:
My Webcam does not work with Cheese
Status in cheese
Still happens with Ubuntu LTS 18.04. I can provide additional info if
needed.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-session in Ubuntu.
https://bugs.launchpad.net/bugs/1734541
Title:
encrypted home-directory is not unmou
Public bug reported:
After booting the system and login screen is displayed top right gear-
icon contains option to Suspend. However, selecting that action has no
results at all (no error message, nothing in any file under /var/log or
journalctl). I would like to get the suspend action to work sim
Extra information: sudo kill -9 via ssh connection
did restore the display in working order without restarting the system
so I'm pretty sure this is caused by some kind of hang caused by xorg
process. Plain kill without -9 did not do anything, though.
Perhaps this is caused by some race condititi
Public bug reported:
Xorg suddenly stops updating the display and CTRL+ALT+F1 does not work.
The issue happens randomly and does not seem to be related to content
being rendered. This time the display hang occurred while I was typing
in gnome-terminal.
I can successfully ssh into the system from
Same as previous user.
Sort of a bother, this old luggable with the Quadro GPU is still a
fairly decent machine despite its age... hope there'll be a fix for the
driver.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-dri
Still present on my system:
Linux Mint 17.3 Cinnamon 64-bit
Cinnamon Version 2.8.8
Linux Kernel 3.19.0-32-generic
Graphics Card Nvidia GeForce GTX 650.
The same bug is also reported here:
https://bugs.launchpad.net/ubuntu/+source/gnome-screenshot/+bug/1406538
https://bugs.launchpad.net/ubuntu/+sou
Public bug reported:
$ dpkg -L oneconf
...
/usr/bin/oneconf-query
$ man oneconf-query
No manual entry for oneconf-query
See 'man 7 undocumented' for help when manual pages are not available.
$ man 7 undocumented
No manual entry for undocumented in section 7
If command oneconf-query is installed
Should it be safe to install ligthdm package from zesty to xenial to
test if it fixes the issue? (https://packages.ubuntu.com/zesty/lightdm
version 1.22.0-0ubuntu2.1)
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to lightdm in Ubuntu.
http
It seems to be that the problem occurs after this:
** (lightdm:1153): WARNING **: Error using VT_WAITACTIVE 7 on /dev/tty0:
Interrupted system call
(The console number depends on luck, of course.)
I would guess that whatever code is emitting that error message is not
handling the situation corre
Happening here, too, randomly after return from S3 (Ubuntu 16.04.3 LTS).
$ uname -a
Linux desktop 4.10.0-38-lowlatency #42~16.04.1-Ubuntu SMP PREEMPT Tue Oct 10
17:35:28 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
Using integrated intel graphics on i5-3570K.
--
You received this bug notification b
Experienced this after fresh install of 17.10 with Virtualbox .30. Guest
additions + Ubuntu sudo apt update && sudo apt upgrade removed the
problem.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-shell in Ubuntu.
https://bugs.launc
Also broken: rendercheck -t composite -o add -f a8r8g8b8,a8
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1670945
Title:
rendercheck claims that 'blend' 'add' operat
Public bug reported:
$ rendercheck -o add -t blend
...
Beginning Add blend test on b8g8r8a8
Add blend test error of 64. at (0, 0) --
RGBA
got: 0.00 0.00 0.00 1.00
expected: 1.00 1.00 1.00 1.00
src color: 0.00 0.00 0.00 1.00 (a8)
dst color: 1.00 1.00 1.00 1.00
src:
The problem still persists with network-manager-gnome 1.2.2 after all.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1589401
Title:
cannot view wifi networks after re-enablin
I installed network-manager-gnome version 1.2.2 available in yakkety.
After preliminary testing (a couple of suspend cycles) it seems to have
fixed the problem!
You can download binaries from
https://launchpad.net/ubuntu/yakkety/+source/network-manager-applet or
build it on xenial like this:
# ap
network-manager{,-gnome} both 1.2.0-0ubuntu0.16.04.3, problem still
persists.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1589401
Title:
cannot view wifi networks after re-
Yeah, I think you should just hardcode xdg-open and then list only that.
Current implementation seems to be execute whatever is in the config and
that cannot be set in apparmor config.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evinc
Public bug reported:
Cinnamon uses "Nemo" /usr/bin/nemo as the file browser and default
apparmor config is too strict and prevents "Open Containing Folder"
feature from working and instead an error message will appear:
Failed to execute child process "nemo" (Permission denied)"
A simple fix woul
Mounted $HOME/tmp ext4 produces this even if path is excluded.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to deja-dup in Ubuntu.
https://bugs.launchpad.net/bugs/953194
Title:
deja-dup attempts to backup "lost+found"
Status in deja-d
I found a workaround for Ubuntu 16.04 LTS:
(1) Open "Network connections" ("nm-connection-editor" from command line)
(2) Try to figure out which "Ethernet" connection is iPad
(3) Select the iPad and click "Edit"
(4) On "General" tab, uncheck "Automatically connect to this network when it is
avail
Duplicate bug 876279 ?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to upower in Ubuntu.
https://bugs.launchpad.net/bugs/861642
Title:
upowerd uses 100% cpu till killed
Status in upower package in Ubuntu:
Confirmed
Bug description:
After upgrading from Ubuntu 14.04 LTS to 16.04 LTS (xenial) I'm affected
by this bug, too. If I connect an Apple iPad Mini using USB cable (with
the intent to charge the tablet only) I get excessive CPU usage. Process
/usr/lib/upower/upowerd owned by root seems to be doing nothing but
eating CPU un
I was able to resolve the problem by disabling backports, it allowed me
to do apt-get update which previously hanged up.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to appstream in Ubuntu.
https://bugs.launchpad.net/bugs/1579712
Title:
Hi! Some conflicts still remain in the /etc/signon-ui/webkit-options.d
directory. Comment #59 has a fix proposal though.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libaccounts-glib in Ubuntu.
https://bugs.launchpad.net/bugs/1451728
Indeed, the patches are not applied. Also, the patch
upstream_allow_install_other_providers.patch does not apply since the
target file differs from what the patch provider used.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libaccounts-
*** This bug is a duplicate of bug 1566700 ***
https://bugs.launchpad.net/bugs/1566700
** This bug has been marked a duplicate of bug 1566700
Alt + Backtick (`) does not switch windows
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed
Public bug reported:
Steps to reproduce:
$ mkdir -p a/1/2
$ touch a/1/2/foo
$ lndir a b
b: No such file or directory
$ mkdir b
$ lndir a b
a: No such file or directory
However, the alternative syntax for lndir still works
cd b
lndir ../a
Either lndir documentation (both usage and man page) nee
This is still a problem. I'm having the exact same issue (though on
google-chrome-stable-44.0.2403.125-1 )
Adding
/opt/google/chrome/chrome Cx -> chromium,
/opt/google/chrome/chrome-sandbox Cx -> chromium,
to /etc/apparmor.d/abstractions/lightdm_chromium-browser did not help (I
tried that in
Works perfectly for me. With an empty keychain, Firefox prompts for
credentials and saves them in the keychain, and printing just works.
Gedit (GTK3 application) is then able to use the same credentials,
although they are a bit different from what GTK3 saves to the keychain.
--
You received this
(99 days ago)
> InstallationMedia: Ubuntu 12.04 "Precise" - Build amd64 LIVE Binary
> 20130106-02:29
> MarkForUpload: True
> ProcEnviron:
>TERM=xterm
>PATH=(custom, no user)
>XDG_RUNTIME_DIR=
>LANG=en_US.UTF-8
>SHELL=/bin/bash
> S
Okay, so now I verified that the nameserver was added to resolv.conf.
Then I rechecked before disconnecting and noted that the extra
resolv.conf entry had disappeared (without changes to network
configuration in the meanwhile). nm-tool reported the correct nameserver
address still, and it seemed to
Public bug reported:
Having paired an Android phone, the network manager menu in Unity
displays the "GT-I9300 Network" appropriately and I can tether over the
phone's mobile broadband just fine.
However, the PAN's nameserver setting is put directly into
/etc/resolv.conf (instead of doing the dnsm
Using lightdm 1.10.2, I tested setting allow-user-switching to false.
Now, every time I log out of a Unity session I get the "The system is
running in low-graphics mode" window. None of the options really help -
I have to "start lightdm" from console to get to the greeter.
--
You received this bu
That is the Trusty version from ubuntu-desktop PPA, all updates are
installed.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to lightdm in Ubuntu.
https://bugs.launchpad.net/bugs/1350357
Title:
Support disabling of user switching per se
Confirmed that the bug exists once more. Martyn's fix works. Could that
be packaged, perhaps?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to lightdm in Ubuntu.
https://bugs.launchpad.net/bugs/1298021
Title:
Google Chrome (not chromium
Public bug reported:
Installing 14.04 in a classroom dual-boot environment, Unity shows icons
for the Windows partitions on the launcher, nonfunctional since they
require root to mount. Such extraneous icons only serve to confuse the
user.
Googling, I found out about the com.canonical.Unity.Devic
This bug still exists with (atleast) Xubuntu 14.10 LTS.
Huawei e3276 correct Vendor:Product is 12d1:1506, but it gets recognized as
12d1:14fe pretty often.
Sometimes a miracle happens and it gets recognized correctly but then usually
Ubuntu doesn't launch the connection manager .
--
You receiv
I believe that Firefox and Thunderbird are standalone programs running
on Ubuntu; there's no dependency on XULRunner and the directories
/usr/lib/firefox and /usr/lib/thunderbird seem to contain different
libxul.so implementations. As such, it may be that XULRunner is okay but
Firefox and Thunderbi
As you can see in the bug report, I'm still running precise (12.04) so I
cannot easily upgrade to unclutter version 8-19.
Reading the debian bug report I'm pretty sure that this bug is something
else because I haven't seen any extra CPU usage. The incorrect focus
movement seems to be single-shot p
Public bug reported:
It seems that the default configuration for "unclutter" causes Firefox
and Thunderbird (probably all XUL applications) to randomly lose focus.
Examples:
https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1231588
https://forum.kde.org/viewtopic.php?f=111&t=117704&start=15
I guess this may be caused by package "unclutter" (which I do have
installed):
https://forum.kde.org/viewtopic.php?f=111&t=117704&start=15
https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1234470
I will try running it with '-noevents' and if that does not fix the
issue, I'll try living with
I have similar issues with both Firefox 25.0.1 and Thunderbird 24.1.1. I
have multiple extensions installed on both, but neither has a single
same extension (so either this may be caused by multiple different
extensions or something else is going on).
Additional info:
- I have been hit with this
I disagree that this bug is greeter related (even if you set your new
password, you haven't told greeter to use it to login, but there is
still the option chosen to log in without one).
What this does, which is more serious for the new user, it's that it
disables the admin password and effectively
Public bug reported:
I believe this crashing has started since last update.
Steps to reproduce:
$ firefox
Segmentation fault (core dumped)
For some reason, apport does not run for this crash. I also tried
$ firefox -g
GNU gdb (Ubuntu/Linaro 7.4-2012.04-0ubuntu2.1) 7.4-2012.04
Copyright (C) 20
The problem depends on firefox profile because following can
successfully launch firefox (with empty profile):
$ mkdir -p tmp/firefox-test
$ HOME=$HOME/tmp/firefox-test firefox
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in U
Public bug reported:
Typing account name to gmail login in Firefox when suddenly black screen
with dot in top left corner. I was typing an email address, so could be
my input there. After ~5-10 seconds login screen reloads. I'll attach
Xorg.0.log.old to this bug as it has some information about th
Changing package to libgl1-mesa-dri due to the xorg-edgers driver
upgrade mentioned before eliminating the issue. I am not positive if I
should chalk it up to xserver-xorg-video-radeon instead but I get the
feeling it's an OpenGL side issue since Compiz does render through that.
Compiz has now run
Public bug reported:
Provider switched to wildcard SSL certificate (*.domain.example). Now
IMAP over SSL complains about bad certificate.
ProblemType: Bug
DistroRelease: Ubuntu 11.10
Package: evolution 3.2.2-0ubuntu0.1
ProcVersionSignature: Ubuntu 3.0.0-30.47-generic 3.0.57
Uname: Linux 3.0.0-30-
For Gnome compatible environments: there's no ready-made extension at
addons.mozilla.org but you can fetch the latest version from
https://github.com/infinity0/mozilla-gnome-keyring or if you use Ubuntu,
you can add PPA from https://launchpad.net/~fat-lobyte9/+archive/ppa-
public and install packag
Public bug reported:
nm-applet sometimes goes unresponsive, generally after a couple of days
of intermittent laptop use (including suspends). The menu does come up,
but choosing an interface to activate doesn't do anything for either
wifi or mobile networks. Not even a visible attempt is made to c
As far as I can see, this doesn't happen anymore. (Artifact of using
Xubuntu desktop at the time? Seems unlikely though.)
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1050434
Thanks Arnulf, I made another workaround based on your tip.
We already distributed the file /usr/share/gconf/defaults/99-our-
defaults to workstations, so we can just override the default
active_plugins specified in 10_compiz-gnome.
That file in turn comes from the package compiz-gnome and I thin
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1050434
Title:
UMTS connections require occasional reconfiguring
Status in “network-manager” package in Ubuntu:
New
Bug descr
** Attachment added: "A test case with incorrectly hyphenated word."
https://bugs.launchpad.net/bugs/1049470/+attachment/3308775/+files/test2.html
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpa
Public bug reported:
Test case: see attached file with Ubuntu Firefox build.
Expected result:
The word should be hyphenated Si-sään-kir-jau-tu-mi-nen.
Actual result:
The word is hyphenated Sisäänki-rja-utu-mi-ne-n.
The problem cannot be reproduced with official firefox builds. I would
guess tha
OK. How about adding "Recommends: openoffice.org-hyphenation" to Firefox
package? I consider hyphenation support a major feature in Firefox and
installing required packages to support hyphenation should be at least
Recommended.
--
You received this bug notification because you are a member of Des
Which hyphenation packages should be installed? Do I need some
openoffice i10n packages? (I'm asking because I've removed all traces of
openoffice because I'm using libreoffice.)
# installed locale packs for Firefox
$ aptitude search firefox | grep locale | grep ^i
i firefox-locale-en
The firefox nightly build URL above has typo: "firefox-16.0a1.en-US
.linux-x86_64.tar.bz2" should be "firefox-17.0a1.en-US.linux-
x86_64.tar.bz2": http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly
/latest-trunk/firefox-17.0a1.en-US.linux-x86_64.tar.bz2
--
You received this bug notification b
Just tested with Firefox 14.0.1 distributed by Ubuntu: hyphenation does
NOT work at http://hyphenator.googlecode.com/svn/dictChecker.html
$ apt-cache policy firefox
firefox:
Installed: 14.0.1+build1-0ubuntu0.10.04.1
Candidate: 14.0.1+build1-0ubuntu0.10.04.1
Version table:
*** 14.0.1+build1-
Marking confirmed because this affects 2 persons. However, this cannot
be reproduced by all testers.
** Changed in: firefox (Ubuntu)
Status: Expired => Confirmed
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
h
I just tested with a clean profile like this:
$ mkdir test-profile
$ cd test-profile
$ HOME=$(pwd) firefox --no-remote
"http://hyphenator.googlecode.com/svn/dictChecker.html";
No language is hyphenated. Tools add-ons manager - Languages says I have
English (GB) and Suomenkielinen (FI) Language p
It appears this bug affects only certain URLs, as some URL's open just
fine and some doesn't (while all of them being valid URLs).
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to empathy in Ubuntu.
https://bugs.launchpad.net/bugs/1020473
Possibly caused by fix in bug 894166 ?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/996981
Title:
Hyphenation regression
Status in “firefox” package in Ubuntu:
New
Bug descripti
Public bug reported:
Web page hyphenation support has regressed in Firefox. I last time
tested the hyphenation support in 2012-04-19 and it did work at that
time (unfortunately, I didn't keep notes about the Firefox package at
that time but I'd guess it was 11.0.xx). Current version does not
suppo
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/996981
Title:
Hyphenation regression
Status in “firefox” package in Ubuntu:
New
Bug description:
Web page hyphenation support has r
Using Banshee 2.2.1 I still get duplicates every time when importing cd's as
mp3.
If I uncheck the button (from preferences) to follow the changes to the
library, I don't get duplicates.
I also have a duplicate remover installed and activated, but it doesn't
work in this ca
90 matches
Mail list logo
