Hello. I'm running the 'testing' release. I found that once I upgrade
to the 2.6.18 kernel my box wouldn't boot.
The boot lines in my grub's menu.lst lines are (with different
variations for version number):
/boot/vmlinuz-2.6.18-3-686 root=/dev/hda1 ro vga=791
What appears to be happening
It then
times out trying to load /scripts/local-top. Eventually I get a
rudimentary shell where I can mount the root drive as /dev/hda1.
I've tweaked the initrd scripts, but yet it's still alternately treating
the root drive as hda and hde. Where is that coming from?
Thanks
Mark
Trying to install a couple of CPAN modules using dh-make-perl.
I've used wget, and then tar. I descend into the modules directory and
go with: debuild. I get:
sh: gcc: command not found
dpkg-architecture: warning: Couldn't determine gcc system type,
falling back to default (native compilatio
On 12/01/2013 08:45 AM, Celejar wrote:
On Fri, 29 Nov 2013 16:32:57 +0100
Ralf Mardorf wrote:
...
I suspect that the good MUAs are all without a GUI, hopefully I'm
mistaken.
Sylpheed is a good GUI MUA.
Regards,
Ralf
Celejar
how about thunderbird ？
--
To UNSUBSCRIBE, email to debian-u
我在x200上面安装了 debian sid，风扇一直在全速运转，想要实现根据温度来调
节转速。
参考了http://www.linuxidc.com/Linux/2009-02/18270.htm
这篇文章提到lm-sensors，于是到官方网站（http://www.lm- sensors.org/wiki
/iwizard/Detection）
按照教程设置，最后加载模 块不能成功。
下面是我的操作过程，有知 道的，帮我看看。
PS：1.像这样 的问题应该在哪里的邮件列表去问呢?
2 有哪位朋友也在 thinkpad上面安装了debian之类的linux系统
After upgrading my Libranet (Sarge-based) system, I now end up with the
following messages after doing anything apt-get based (including Synaptic):
W: No priority (or zero) specified for pin
W: No priority (or zero) specified for pin
However the apt-get commands and apps work. How do I solve
Truecrypt 64bit Lib to installfuse-utils, loop-aes-utils, libfuse-dev
User PermisionInsert the user to group use
modify the file “” \etc\sudoers and insert the your user name
Download and installation Truecryptwww.truecrypt.org , download application
64bit
RESTART COMPUTER
Exstract truecryptXXX.
Hi all,
I'd like to limit access to (micro) SD cards on our systems to only
those cards that have been vetted up front.
At first glance I thought maybe USBGuard would help me do this, but that
will only detect built-in or USB-mounted card readers in which the card
is plugged, not the storage
On 2021-11-12 17:13, Stefan Monnier wrote:
I'd like to limit access to (micro) SD cards on our systems to only those
cards that have been vetted up front.
IIUC the way SD card are interfaced with the system, you can't use an
approach like USBGuard for that indeed.
I was getting afraid of that
On 2021-12-05 13:33, Andrei POPESCU wrote:
On Vi, 12 nov 21, 12:27:59, Stefan Monnier wrote:
As mentioned, the way to control it will depend on the specific tool
used to mount. E.g. if it's mounted by hand via a rule in /etc/fstab,
then you can rules that specify the device via /etc/disk/by-uu
On 2021-12-08 15:27, Jorge P. de Morais Neto wrote:
Hi everyone! I have a Dell Inspiron 5570 laptop with 1TB HDD and 16 GiB
RAM (it supports 32 GiB). I am about to buy an M.2 NVMe 250GB SSD---a
Western Digital WD Blue SN550. I would like to set the system for
reliability, SSD durability¹ and p
On 2021-12-09 15:46, Dan Ritter wrote:
hdv@gmail wrote:
On 2021-12-08 15:27, Jorge P. de Morais Neto wrote:
Hi everyone! I have a Dell Inspiron 5570 laptop with 1TB HDD and 16 GiB
RAM (it supports 32 GiB). I am about to buy an M.2 NVMe 250GB SSD---a
Regarding the swap space: I wouldn&#
On 2021-12-15 15:51, Jorge P. de Morais Neto wrote:
Hello,
Em [2021-12-09 qui 15:00:43+0100], hdv@gmail escreveu:
Regarding the swap space: I wouldn't make it so big. That really isn't
necessary. I have a 64GB RAM system here, on which I have 2GB of swap. I
doubt I have ever
On 2022-01-11 12:41, Andrei POPESCU wrote:
On Du, 02 ian 22, 20:52:25, David Wright wrote:
On Fri 10 Dec 2021 at 17:20:52 (+0100), Andrei POPESCU wrote:
On Lu, 06 dec 21, 10:18:49, David Wright wrote:
On Sun 05 Dec 2021 at 13:33:41 (+0100), Andrei POPESCU wrote:
On Vi, 12 nov 21, 12:27:59, St
On 2022-01-15 17:13, Andrei POPESCU wrote:
On Mi, 12 ian 22, 08:54:50, john doe wrote:
Debians,
i've been using a laptop for a fiew years now and before this laptop
dies on me I would like to buy a new laptop.
I'm thinking about two options:
- Buying something of the shelph and installing Debi
On 2021-05-18 18:37, IL Ka wrote:
Thanks all. I looked at my config files (which go back at least 15
years) and found lots of explicitly setting both LC_ALL=C and LC_LANG=C.
Should I remove all, or just remove the LC_ALL?
> Using LC_ALL is strongly discouraged as it overrides eve
On 2022-01-27 05:35, Pankaj Jangid wrote:
Since I have setup a new hardware - x570 chipset, rx570 GPU - I am
facing a very strange problem. The monitor goes blank for a brief time,
like 1-2s and then comes back. It is connected with the GPU using HDMI
cable.
During that 1-2s, the machine respons
On 2022-01-27 10:40, Bijan Soleymani wrote:
On 2022-01-27 4:23 a.m., Bijan Soleymani wrote:
Are you also connected via HDMI? I think I am using DVI to mini
display port.
I will have to check when I return home from this assignment in 2 weeks
time, but I am almost certain I am using DP. I see
On 2022-01-27 11:16, Bijan Soleymani wrote:
On 2022-01-27 5:00 a.m., hdv@gmail wrote:
My guess is about once every week. The display is on for roughly 16
hours each day. There seems to be no discernable relation to "load".
At least not that I could confirm. I haven't fo
On 2022-01-28 14:12, Pankaj Jangid wrote:
Pankaj Jangid writes:
UPDATE:
I have changed the HDMI cable and since last 6hrs I have not faced that
event again. Will update in the thread if it re-appears.
Another thing happened when I was replacing the cable. I heard the
sparking noise in the po
On 2022-01-28 15:31, Bijan Soleymani wrote:
On 2022-01-28 08:40, hdv@gmail wrote:
I am reasonably sure the problem lies in some form or combination of
software. Sadly, my expertise in that area is insufficient to find out
what it is exactly.
What kernel/OS/driver are you using if it is
On 2022-01-28 16:48, Bijan Soleymani wrote:
On 2022-01-28 10:16, hdv@gmail wrote:
About the fan: I seem to remember I had to install amdgpu-fan (needed
to look that up, forgot the name) when I got this setup. Not sure if
it still is needed or that the driver can control the fan reliably
On 2022-01-28 16:53, Andrew M.A. Cater wrote:
Wherever possible, it's easier if you are using Debian stable: more people
will hae experience / be running that at any one time.
All the very best, as ever,
Andy Cater
I know. But testing is more convenient for me. I need to test current
softwa
cat /sys/class/drm/card0/device/hwmon/hwmon0/temp1_input
Should give temperature:
Mine right now is:
29000
which apparently is 29C.
/sys/class/drm/card0/device/hwmon/hwmon0/pwm1
is the power management.
I returned home yesterday.
It seems the temperature here isn't out of the ordinary:
$ c
On 2022-03-19 13:19, Eduardo M KALINOWSKI wrote:
On 19/03/2022 09:06, Stella Ashburne wrote:
No thank you. I won't touch NetworkManager or its variants with a ten
foot pole. Why?
Reason #1
[quote] I am sorry but we do not support NetworkManager.
I would go so far as to say do not use it at a
On 2022-08-17 12:53, Tom Browder wrote:
Unfortunately, I have to have a Windows host. I have given up dual
hosting because of the pain, so I am using a dedicated Win 10 box and a
Deb laptop.
I would love to run Windows on a VM on Debian iff I can have it be
reliable enough to use with reasona
On 2022-08-17 12:53, Tom Browder wrote:
Unfortunately, I have to have a Windows host. I have given up dual
hosting because of the pain, so I am using a dedicated Win 10 box and a
Deb laptop.
I would love to run Windows on a VM on Debian iff I can have it be
reliable enough to use with reasona
On 2020-12-03 13:35, Gene Heskett wrote:
I've had it with a certain bot that that ignore my robots.txt and
proceeds to mirror my site, several times a day, burning up my upload
bandwidth. They've moved it to 5 different addresses since midnight.
I want to nail the door shut on the first attempte
On 2020-12-06 21:43, Michael Grant wrote:
I need to set the date to several years in the future in order to test
something. When I do this via the date command, the date returns back
almost instantly (or within a few seconds).
# timedatectl set-time 2025-12-06 20:41:41
# date
Sat 6 Dec 20:
On 2020-12-06 21:56, hdv@gmail wrote:
> # timedatectl set-ntp true
I am sorry for the typo. This should of course have been "false"!
Grx HdV
. Setting the system using the date command, it just
resets itself back to the current date/time after a few seconds. How
can I stop this?
Thanks!
Michael Grant
*From: *hdv@gmail <mailto:hdv.ja...@gmail.com>
*Sent: *07 December 2020 07:53
*To: *debian-user@lists.debian.org <mail
On 2020-12-13 16:34, Michael Grant wrote:
and now it appears to stick. So I'm good. Thanks for your help though!
Michael Grant
Glad to read you have solved it.
Grx HdV
On 2021-01-03 12:58, Stephen P. Molnar wrote:
My main computer runs Debian Buster and is displaying some unusual
behavior.
The monitor is blanking, without warning, at random times, and restoring
the screen while I working. There is no warning, nor does the computer
seem to be overheating (
On 2021-01-14 20:06, Rasmus MK wrote:
Hi list,
I'm looking for help in understanding how locales work and how to configure my
system running Debian Testing.
During the Debian installation (graphical) I configured my locale to be
"en_SE.UTF-8".
Recently a python script crashed with the error mes
On 2021-01-30 19:49, reader wrote:
Are there any tools that can set what each button or scrollwhere does?
I have a mouse that when pressing scrollwheel will not paste. I can
think of no other mouse I've had that does not paste (in linux) when
the scroll where is pressed (assuming something has
On 2021-01-31 00:16, Vincent Lefevre wrote:
On 2021-01-30 19:58:13 +0100, hdv@gmail wrote:
I use xinput and xbindkeys to solve issues with mice and keyboards. Had to
to get my Logitech MX Ergo Trackball and MX Keys to do what I wanted them to
do. Works remarkably well, ... if the mouse and
On 2018-08-27 10:56, Hans wrote:
> Hi folks,
>
> after lates upgrade of KDE in debian/testing, I found several issues.
>
> 1. Missing of all applications (icons) inm the taskbar
>
> 2. Missing of all status icons in the taskbar
>
> 3. Right mouse click in for desktop settimngs in desktop nbo mo
On 2018-08-28 07:24, local10 wrote:
> Aug 27, 2018, 6:00 PM by cyaiple...@sitesplace.net:
>
>> I had that happen not too long ago in Stretch. I just rebooted and it was OK.
>>
> A reboot didn't do it for me, the issue still persist.
>
>
>> You may want to also check your settings in Display - Co
On 2018-09-05 11:22, local10 wrote:
> Hi,
>
> KDE still broken in tesing or is it just me? Anyone have any ideas when it'll
> be fixed?
>
> Thanks
I did an upgrade yesterday and noticed the panel containing my application
launchers, task manager and system tray is fully functional again. Howeve
On 2018-09-26 11:52, Richard Owlett wrote:
> I'm setting up a new machine and copying files from the old machine's home
> directory. At the same time I'm creating a new directory structure to better
> match how I work.
>
> I found it expedient to have at least three instances of the file manager
On 12/6/18 11:31 PM, Gene Heskett wrote:
> Greetings all;
>
> The librecad in the debian repos for wheezy is nearly a decade old,
> v-1.02. There are V2-* stuff that still runs on QT4 some of which is
> already installed.
>
> Is there a repo where I can source a newer version than 1.02 without
On 12/7/18 1:46 AM, Gene Heskett wrote:
> On Thursday 06 December 2018 17:48:21 hdv@gmail wrote:
>
>> On 12/6/18 11:31 PM, Gene Heskett wrote:
>>> Greetings all;
>>>
>>> The librecad in the debian repos for wheezy is nearly a decade old,
>>> v-1
On 12/7/18 10:50 AM, Joe wrote:
> On Thu, 6 Dec 2018 19:46:42 -0500
> Gene Heskett wrote:
>
>> On Thursday 06 December 2018 17:48:21 hdv@gmail wrote:
>>
>
>>>
>>> Some time ago I tried LibreCAD as well and soon had to conclude
>>> there were
On 12/7/18 2:45 PM, Gene Heskett wrote:
> All very encouraging. But in about 4 hours, I've written and tested about
> 90 LOC which is about 75% of what I need to have this do. :) So I think
> I'll continue on this path. :)
There's always more than one way to scratch an itch... ;-)
> Thank you
Hi list,
After a recent upgrade I noticed that my system could not reboot into the new
4.19 kernel. So I rebooted into the kernel before that (4.18.0-3), which did not
work either. Booting into the version before that (4.18.-02) did work just fine.
It seems I hadn't rebooted after the previous up
On 05/01/2019 08.52, Reco wrote:
> Hi.
>
> On Sat, Jan 05, 2019 at 03:41:05AM +0100, hdv@gmail wrote:
>> So how do I make sure that 4.18.0-2 does not get removed from the boot menu
>> after the next kernel upgrade?
>
> Do not uninstall this version of kernel, si
On 05/01/2019 11.19, Reco wrote:
> On Sat, Jan 05, 2019 at 11:16:23AM +0100, hdv@gmail wrote:
>> On 05/01/2019 08.52, Reco wrote:
>>> Hi.
>>>
>>> On Sat, Jan 05, 2019 at 03:41:05AM +0100, hdv@gmail wrote:
>>>> So how do I make sure that
On 05/01/2019 14.45, songbird wrote:
> hdv@gmail wrote:
> ...
>> So how do I make sure that 4.18.0-2 does not get removed from the boot menu
>> after the next kernel upgrade? I'd like to keep it until I have verified
>> that an
>> upgrade does work. However, a
On 17/02/2019 05.05, Juan R. de Silva wrote:
> Pan newsreader,which I used happily for several years, lately get buggy
> as hell and cannot be used any longer at all.
>
> I tried Thunderbird from Debian repo and found that the pure thing is not
> capable to keep a uniform font size through all p
On 17/02/2019 11.58, Erik Christiansen wrote:
> On 17.02.19 10:16, hdv@gmail wrote:
>> On 17/02/2019 05.05, Juan R. de Silva wrote:
>>> Can your share with me what do you use for newsgroups reading. I do not
>>> care
>>> about binaries. All I want to follow se
Hi all,
The mSATA SSD in my Thinkpad W530 was getting full,. So I tried to replace it
with a new larger one (Samsung EVO 860). I knew about the mSATA II vs III issue
and the BIOS AHCI setting. What I didn't expect was the laptop to slow down to a
crawl. To illustrate: even opening de start menu i
On 04/03/2019 13.53, Hans wrote:
> Am Montag, 4. März 2019, 13:04:53 CET schrieb hdv@gmail:
> Hi,
>
> try to start with a livefile system, then check the ssd speed. Thus you see,
> if
> the problem is by the operating system or by the hardware.
>
> If it is same slow,
On 04/03/2019 15.36, Ric Moore wrote:
> On 3/4/19 9:19 AM, hdv@gmail wrote:
>> ame day, no old image was used.
>
> Right, but if you didn't use a "clean install" more than likely an old
> configuration might be at fault. I don't have an SSD but during the ins
On 04/03/2019 16.14, Alexander V. Makartsev wrote:
> On 04.03.2019 19:40, hdv@gmail wrote:
>> On 04/03/2019 15.36, Ric Moore wrote:
>>> On 3/4/19 9:19 AM, hdv@gmail wrote:
>>>> ame day, no old image was used.
>>> Right, but if you didn't u
On 05/03/2019 04.28, Paul Ezvan wrote:
> Le 04/03/2019 à 13:32, deloptes a écrit :
>> double check - I had similar observation when trying to setup USB stick boot
>> for a notebook - it's a company property, so not supposed to do that ;-)
>>
>> Well turned out that I had to modify few bios settings
On 06/03/2019 02.04, Jimmy Johnson wrote:
> hdv@gmail wrote:
>> On 05/03/2019 04.28, Paul Ezvan wrote:
>>> Le 04/03/2019 à 13:32, deloptes a écrit :
>>>> double check - I had similar observation when trying to setup USB stick
>>>> boot
>>>
On 08/03/2019 07.39, Stefan Monnier wrote:
>> results. I do remember that cached reads were about 1.1 GB/s for both
>> the old and the new SSD after the slowness started.
>
> FWIW, the "cached read" speed of hdparm doesn't have much to do with the
> SSD (it reads from the in-RAM cache, not from th
On 09/04/2019 21.23, Lee wrote:
> On 4/9/19, Dan Ritter wrote:
>> Lee wrote:
>>> What are people doing for putting config files in [under?] git?
>>>
>>> I'd like to have at least some system config files maintained in git
>>> so I can get a history of changes.
>>> (and yes, I know, I really shoul
On 09/04/2019 23.09, Lee wrote:
> On 4/9/19, hdv@gmail wrote:
>> On 09/04/2019 21.23, Lee wrote:
>>> On 4/9/19, Dan Ritter wrote:
>>>> Lee wrote:
>>>>> What are people doing for putting config files in [under?] git?
>>>>>
>>>&g
On 20/04/2019 17.43, Andrea Borgia wrote:
> Hi.
>
> Running the testing branch and using xfce, the last couple of resumes from
> hibernation were problematic: the first one had the suspend dialog still
> visible
> with the "yes" button still pushed in, all applications were open, the mouse
> coul
On 21/04/2019 10.42, Andrea Borgia wrote:
> Il 20/04/19 18:16, hdv@gmail ha scritto:
>
>
>> I see the same type of problems.
>
> Hmm, I'm not so sure about it: in my case the sytem works except (parts of) X
> and it is most likely not kernel-related. In you
On 18/10/2019 19.26, Doug McGarrett wrote:
...
> I'm not sure if any Pascal compilers are still available, but
> Turbo was the most popular back when. Until the last version
> came out, and it was too complicated for its own good.
Forgive me for barging in, but I just had to answer that.
Sure t
On 2020-01-22 12:41, Ottavio Caruso wrote:
> Hi,
>
> in one my previous posts to the list, I complained that hibernation
> was somewhat broken on my Thinkpad and it would generate filesystem
> corruption on resume. With the help of the list, I was able to fix
> that problem. However, I still have
On 2020-02-12 12:26, Malcolm Beeson-Earwicker wrote:
> I've been a Debian user for about twenty years now, and have found that I have
> to run more and more of my machines under windo$e because the latest versions
> of
> Debian just fail, I imagine due to all this UEFI-rubbish. Does anyone know of
David Baron 写道:
Yes, but i prefer linux. Too bad there is no
flashplayer, or other software.
Flash player beta 9 for linux is now available for Linux. PPC? I don't
know--go to macromedia and check it out.
what is ppc's mean?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a su
I had difficulties installing Debian Lenny using the netinstall disk
today.
I was installing Debian Lenny 5.0 on an older Server with a Supermicro
Motherboard and an Adaptec 2400A RAID Controller (2 PATA Drives in RAID
1 Configuration) . Install failed when it reached the point where it
shoul
On 2014-11-30 19:55, Paul E Condon wrote:
> I'm using Jessie, and attempting to do frequent update/upgrades.
> I use aptitude. Computer is HP with dual core pentium cpu.
> The most recent upgrade left cups and cups-filters only partially
> installed with the following report:
>
> T A cups
> W A cu
On 2014-07-23 23:04, Harry Putnam wrote:
> Andreas Rönnquist writes:
>
>>> I upgraded vbox from 4.3.10 to 4.3 14. Now the best screen res I can
>>> get in 1024 x 768. When it was something like 1500 x . Not sure
>>> of exact setting but desktop was much larger when I logged in before
>>>
I'm told that I need to "file a separate RFS bug against the sponsorship-requests
pseudo-package". I have spent hours reading the documentation and I thought that I
had done this, I am totally mystified about what else I need to do and how. Has anyone
got any helpful suggestions please?
-
On 2015-01-30 10:47, Karen Lewellen wrote:
> Now that seems nifty.
Don't know what your timeframe is, but have you considered the Neo900?
See neo900.org. It is not out yet, but it seems promising.
Grx HdV
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "u
On 2017-08-26 05:14, ray wrote:
> I would like to find a way to keep track of changes I make to my system. It
> seem that I may learn from others on how they keep track of changes they make
> to their systems.
>
> When I make changes, I don't remember where I made changes or why.
>
> It would be
On 2017-08-31 04:39, ray wrote:
> On Sunday, August 27, 2017 at 6:50:06 AM UTC-5, hdv@gmail wrote:
>> On 2017-08-26 05:14, ray wrote:
>>> I would like to find a way to keep track of changes I make to my system.
>>> ...snip
>> Hi Ray,
>>
>> I just retu
On 2017-11-23 02:05, Emanuel Berg wrote:
> Librecad seems good and I got it working
> instantly on a Debian box.
>
> Only how do I draw a box and then change the
> properties to specific side lengths?
>
> For example, if I want to picture a building
> that is rectangular (from above) with one sid
On 2017-11-23 09:08, Weaver wrote:
> I don't think you'll find LibreCad is `dead'.
> I think you'll find it just takes a little more than five minutes to get
> on top of a programme.
> The traffic on a mailing list is also no indication of usage or how
> `good' a package is.
> Traffic may well be
Hi, I am having some problems in getting my wlan (Intel Centrino 6300
AGN) to work on a T510 with Debian 6.0.
The 6300 does work under Windows... So there does'nt appear to be a
hardware defect, it's just a software configuration issue.
I have wrote (debian-6.0.0-amd64-netinst.iso) to a USB key a
Hi,
I'm on Debian Sid with an AMD 9070XT
"6.12.27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.27-1 (2025-05-06) x86_64
GNU/Linux"
"Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Navi 48 [RX 9070/9070 XT]
driver: amdgpu v: kernel
Display: wayland server: X.Org v: 24.1.6 with: Xwayland
I am using Lenny.
I have created partitions using "Guided partition" and I choose the
option for "seperate folders for everything".
[1] Today I was going through "HowTo : Securing Debian" and came across
the suggestion of "Pawword for Grub".
But when I did open the /boot/grub/menu.lst there ar
On Sun, 2009-04-05 at 21:28 +0530, Gmail POP3 Access wrote:
> On Sun, 2009-04-05 at 14:38 +, Harry Rickards wrote:
> > Quoting Gmail POP3 Access :
> >
> > > But when I did open the /boot/grub/menu.lst there are a lot of entries
> > > starting with # symbol.
On Sun, 2009-04-05 at 16:18 +, Harry Rickards wrote:
> Quoting Gmail POP3 Access :
>
> > On Sun, 2009-04-05 at 14:38 +, Harry Rickards wrote:
> >> Quoting Gmail POP3 Access :
> >>
> ...
> >> > I have edited the file with the follwoing entri
Hello All,
P.S> Sorry about cross-posting, but you never know who has the answer :)
This might be a stupid question but I'm wondering if someone knows (and if
it's possible) to install debian on a hard drive manually from a "boot.img"
file?
I have a situation like so:
an x86 machine with Solari
On Sat, Mar 12, 2011 at 10:11 PM, Doug wrote:
> The following assumes that (at least) the Solaris drive is IDE, not SATA.
> If it's SATA, then you need to
> find out if there are "master" channels and "slave" channels driving the
> hard disks, and proceed as
> suggested. You can at least proceed
Hello All,
I'd posted this question earlier but had confused myself during the process
which didn't lead to much help from the community as the wrong questions
were asked. So let me try again.
I have a situation like so:
an x86 machine with Solaris 8 preinstalled on it. It's an appliance from a
On Tue, Mar 15, 2011 at 3:44 AM, Joseph Lenox wrote:
> I've done some work with Solaris 10, trying to get rid of it for most of my
> workstations. I was unaware there was even a solaris 8 x86 install (I'd
> change the Solaris install to 10 as a matter of principle -- ZFS is that
> good).
>
> Use t
Hello all
I need to use sed to replace a given line in a text file with the
current working directory. But this is getting quite tricky. Problem
ilustrated below:
$ cat text.txt
:/some/wrong/path/
$ sed s/.*/:$TERM/ text.txt
:x
On Fri, 2011-03-18 at 18:59 +0100, Andrej Kacian wrote:
> On Fri, 18 Mar 2011 17:46:04 +
> Joao Ferreira gmail wrote:
>
> >jmf@squeeje:~$ sed s/.*/:$PWD/ text.txt
> >sed: -e expression #1, char 16: unknown option to `s'
>
> Hello,
>
> this
Hello All,
I've made a first attempt at trying to change some config of the stock
kernel for squeeze on sparc64. Went through the instructions found somewhere
on the net and on the debian wiki, and have ended up with a kernel package.
Command used was:
#> time nice fakeroot make-kpkg --subarch=su
Hello All,
I'm trying to install some software on Debian (Squeeze) for Sparc 64-bit.
I have the following installed:
#> dpkg --get-selections | egrep -i -e 'ssl|tls'
libcurl3-gnutls install
libcurl4-gnutls-dev install
libgnutls-dev
Hello all,
I read a text about bash that mentions a difference between "login
shell" and "interactive shell".
I'm affraid I don not know the difference. Can anyone enlighten me ?
text I read was:
"When Bash starts executes the commands in a variety of different
scripts. When started as an inte
On Fri, 2011-10-14 at 08:53 +0100, Chris Davies wrote:
> Joao Ferreira Gmail wrote:
> > I read a text about bash that mentions a difference between "login
> > shell" and "interactive shell".
>
> > I'm affraid I don not know the difference. Can a
Hello all,
I have this strange situation:
a) user jane on one system transfers her public DSA key to account john
at a given remote host. it works. jane accesses john's account without
typing a password.
b) now the same user jane transfers her public DSA key to account mary
at the _same_ remote
On Thu, 2011-10-20 at 23:40 -0600, Bob Proulx wrote:
> Joao Ferreira Gmail wrote:
> > a) user jane on one system transfers her public DSA key to account john
> > at a given remote host. it works. jane accesses john's account without
> > typing a password.
> >
Hello all,
I'm trying to get mantis to send e-mails but I can't get it right.
I posted on the mantis list but I got no replies. So I wonder if anyone
on Debian list is using mantis.
I've tried many scenarios but I still can't get mantis to send e-mails.
The logs generated are not clear enough.
:) bull's eye :)
On Sun, 2011-11-13 at 13:14 +, Camaleón wrote:
> On Sat, 12 Nov 2011 14:58:43 +, Joao Ferreira Gmail wrote:
>
> Did you already follow the steps detailed here? They are for Gmail but
> the basics should also valid for other email servers.
>
>
Hello all,
I'm going to start using xfce4.
Can I safelly "apt-get remove/purge gnome"
Or should I expect any side impacts ?
Has anyone done this before ?
thank you
Joao
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listm
On Mon, 2011-11-14 at 08:14 -0600, Hugo Vanwoerkom wrote:
> Lorenzo Sutton wrote:
> > On 14/11/11 11:19, Joao Ferreira Gmail wrote:
> >> Can I safelly "apt-get remove/purge gnome"
> >>
> > Depends on what you call 'safely' and on what you
On Mon, 2011-11-14 at 20:39 +0100, Ralf Mardorf wrote:
> Hi :)
>
> do most of you replace GNOME 3 by XFCE?
>
> I'm undecided what to do, but I guess it would be wise to install
> parallel to GNOME 3 the most used alternative installed by users who are
> subscribed to this list.
>
> Excepted of K
On Wed, 2011-11-16 at 17:15 +, Wolodja Wentland wrote:
> On Wed, Nov 16, 2011 at 16:58 +, Joao Ferreira Gmail wrote:
> > Hi all,
> >
> > a crazy ideia just crossed my mind ?
> >
> > Is there a command that allows me to "glue" to text files t
On Thu, 2011-11-17 at 15:57 +0200, Johan Scheepers wrote:
> Good day,
>
> Running Gnome desktop debian 6.03.
>
> Kindly is there a command to add the KDE desktop to a Gnome system.
>
"apt-get install kde-standard" should work (I did not try).
Joao
> I remember that in Ubuntu there is such a c
On Fri, 2011-11-18 at 20:52 +, Hendrik Boom wrote:
> I've fled from gnome 3 and am mostly happy with xfce. But there's the
> panel with six icons at the bottom of the screen that obscures the bottom
> of a lot of windows. How can I get rid of it, or move it elsewhere? Is
> it possible to
On Mon, 2011-12-12 at 12:44 +, steef wrote:
> LinuxIsOne schreef:
> > HI,
> >
> > when did Debian came into existence?
> >
> >
>
> 1993
See Ian Murdock's opinion :)
http://ianmurdock.com/linux/linux-family-tree-version-0-90/
check out the image !!
Joao
>
> s.
>
>
--
To UNSUBSCRIBE
1 - 100 of 173 matches
Mail list logo
